Search results

Diese Ergänzung modifiziert oder ersetzt, falls in der Beschaffungsdokumentation oder den Zeichnungen gefordert, spezielle Anforderungen von IPC-6012D-DE für starre Leiterplatten, die Vibrationen und thermische Zyklen in den Umgebungsbedingungen für elektronische Verbindungen in der Automobilbranche überstehen müssen. Erschienen im April 2016. Übersetzt im September 2016.

Esta adición suplementa o reemplaza específicamente identificado requisitos del IPC-6012D, revisión D, para los tableros impresos rígidos que tienen que sobrevivir a la vibración, ensayos/pruebas en tierra y ambientes cíclicos térmicos de espacio y aviónica militar.

Diese Ergänzung ergänzt oder ersetzt spezielle Anforderungen in IPC-6012D-DE, Ausgabe D für starre Leiterplatten, die Vibrationen, Bodentests und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischer Luftfahrt bestehen müssen.

IPC/WHMA-A-620C-R 轨道交通补充标准提供了对 IPC/WHMA-A-620C 标准的补充要求，描述了用于轨道交通行业的线缆、线束及其组件的相关要求，如生产压接、机械固定和焊接互连的材料、方法、测试和验收标准等，以保证其在高速铁路环境下电缆线束及其组件的高度可靠性和环境适应性。

本补充标准提供的要求，是对已发布的IPC-6018C 中要求的补充和某些情况下的替代， 以确保用于航天和军事航空电子设备中的印制电路板能够在振动、静态测试和热循环环境条件下的可靠性。2016年7月发布，2019年8月翻译。.

This original research was a cooperative effort between the EMPF and IPC, released as EMPF-RR-0013 in 1993 for better understanding of ionic cleanliness testing. The IPC Ionic Conductivity/Ion Chromatography Test Task Group has validated its continued importance and relevance to the cleaning community and IPC-TR-583 is the result. It includes how solvent temperature influences the final...

This single-sided (4 up) pattern is used for evaluating the interaction of solder flux and solder paste residues on printed boards. This board was used in the Phase 3 portion of the test program evaluating alternative technologies used to eliminate CFCs in printed board assembly operations. The board contains four comb patterns with 0.4 mm lines and 0.5 mm spaces. A stencil pattern is also...

本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。

This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...

Artwork required for certification to either MIL-P-50884, MIL-P-55110, also IPC-6011, IPC-6012 and IPC-6013. Includes Master Drawing #100043 (10 pcs. 30 x 46 cm 1:1). Available in Gerber format.

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

This technical report provides full detail of the round robin study charged with assessing the use of Interconnect Stress Test (IST) as a test for incoming inspection in lieu of Thermal Stress in the detection of innerlayer separations in plated-through holes. Includes background on the Post Separation Task Group, test results, round robin test plan, conclusions and test methods used. 51 pages...

This document details the test procedures, test results and team conclusions for the IPC Cleaning and Cleanliness Testing Program, Phase 3, Low Solids Flux in Ambient Air. This effort has been part of a multi-stage program to investigate material and process alternatives to the use of chlorofluorocarbons (CFCs) in electronics manufacturing. This Phase 3 effort has been dedicated to characterizing...

This addendum to J-STD-001, originally developed for Revision B but also applicable to Revision C, proposes solutions for cost-effective testing and increased implementation. Also covers other assembly test methods that are not addressed in J-STD-001. 12 pages. Released October 1996. Now available in electronic format.

Details the results of a two-year study to determine the effect of steam aging exposure on components. A variety of solderable finishes were used. A small production simulation utilized preconditioned and as-received samples and tested a total of 2,000 joints. 15 pages. Released July 1996.

本文件提供了制定最佳实践方法的指南，用于在开发正式DFX（面向可制造性、可制作性、可组装性、可测试性、成本、可靠性、环境、重用性设计）的过程中对采用表面贴装和通孔器件的印制板组件进行布局。

IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...

IPC-9797はプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。

本标准描述了在印制板中以成形或放置方式实现的有源和无源元器件在设计和组装方面的挑战。包括内部电子元器件的完整结构可用于表面贴装和／或通孔元器件连接。在组装过程中，多层结构变成准备为进一步加工的完整产品，它可由有机、无机（陶瓷）或两类兼有的材料制成。

El J-STD-075 continúa donde es J-STD-020 termina proporcionando los métodos de pruebas para clasificar las limitaciones de los procesos térmicos en los peores casos para los componentes electrónicos. Las clasificación hace referencia a los perfiles de soldadura para procesos industriales comunes de ola y de reflujo incluyendo procesos libres de plomo. La clasificación representa los máximos...

描述 中文描述 表面贴装焊接连接加速可靠性测试指南评估和预测电子组件在实际使用环境下的测试结果。1992年11月发布。2016年5月翻译.

简要介绍 （英文） J-STD-075主要涵盖了J-STD-020未涉及的内容，所提供的测试方法可针对电子元器件在最坏情况下对焊接组装工艺的限制进行分级，分级时采用常见的波峰焊和再流焊工艺曲线，包括无铅工艺。分级代表最高的工艺敏感等级，并没有为组装厂建立返工条件或推荐工艺。它概述了非半导体元器件工艺敏感等级（PSL）的分级和标识程序，潮湿敏感等级（MSL）符合半导体行业的分级（J-STD-020《非气密固态表面贴装器件潮湿/再流焊敏感度分级》和J-STD-033《潮湿/再流焊敏感表面贴装器件的操作、包装、运输及使用》）。J-STD-075取代IPC-9503。由ECA、IPC和JEDEC联合开发。全文共12页，于2008年8月发布。2010年9月出版其中文版。

This is the German Language version of the J-STD-075. J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish...

简要介绍 （英文） 本标准是IPC发布的首份电子产品整机的可接受性标准。内容涉及组装过程中整机的可接受性要求。本标准的制定用来指导电气和电子设备整机制造商和终端用户了解满足要求的最佳做法，确保终端产品在预期设计寿命内组装的可靠性和功能。2013年9月发布；共30页。2014年7月翻译

The A-53-Gerber is a single-sided test board having six SIR test patterns which were designed for surface insulation testing. The test patterns consist of two comb patterns with 500µm (0.0197”) lines/spaces, two comb patterns with 318µm (0.0125”) lines/spaces and two comb patterns with 200µm (0.0079) lines/spaces. The contact fingers of the board are normally gold plated for compatibility with...