Search results

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

This document provides the designer/user with guideline information related to the use of pressure sensitive adhesives (PSAs) for fabrication and assembly of flexible, rigid or rigid-flex printed boards, membrane switches and component attachments. It also provides information on adhesive types available, their inherent strengths, weaknesses, limitations and correct processes needed for creating...

Now updated to align with IPC-7912A for end item DPMO, this document defines consistent methodologies for computation of in-process defects per million opportunities (DPMO) metrics for any evaluation stage in the assembly process. It is intended for use in measuring in-process assembly steps rather than end product determination. Calculation of completed item DPMO is addressed in IPC-7912A. A...

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

The IPC-J-STD-006C-AM1 amendment provides better detail of a solder alloy's maximum allowed deviation about the nominal level of the element's mass than was provided in past alloy standards. The IPC-J-STD-006C-AM1 amendment provided information on negative effects of adding rare earth elements to specific, heavy tin-containing, lead-free solder alloys and propensity of tin whisker formation...

Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components

IPC J-STD-001JS Space and Military Addendum supplements or replaces specifically identified requirements of IPC J-STD-001J requirements for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space and military applications.

IPC J-STD-001JA/IPC-A-610JA is the automotive addendum to J-STD-001J and IPC-A-610J. It provides criteria to ensure the reliability of soldered automotive electrical and electronic assemblies in the field under harsh environments and considers automated high-volume production. IPC J-STD-001JA/IPC-A-610JA addendum is not a standalone document, and it must be used in conjunction with J-STD-001J and...

The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...

IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

The IPC-HDBK-001H is a companion document to J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies providing guidance and supporting information for the requirements found in the standard. IPC-HDBK-001H is structured to map paragraph-to-paragraph with the standard, it includes the "how-to" and "why" behind many of the criteria in an easy-to-use reference handbook.

This practical, easy-to-use guide illustrates surface mount solder connections included in the IPC-A-610 Acceptability of Electronic Assemblies standard. While not a replacement for the complete IPC-A-610H standard, this durable reference tool is a valuable instructional resource and job aid for accurate, on-the-job inspections across all three product classes. The guide features clear, color...

IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect through-hole solder conditions that are not visible by any other means. IPC-J-STD-001H is a must-have for those...

The IPC-QRG-18J desk reference manual contains illustration/images of component identification, schematic symbols and more with detailed descriptions of commonly used components. The IPC-DRM-18J contains updated info on SSOP, TSOP, QFP, LQFP, PQFP, LCC, QFN, and BGA-related packages, including all the variations within those groups. New components include DFN, QFN – Multi Row, PoP (Package on...

This user-friendly guide clearly illustrates essential criteria from the IPC-A-610 Acceptability of Electronic Assemblies standard. While not a replacement for the full IPC-A-610 standard, this durable reference tool serves as a powerful instructional resource in the classroom and an indispensable job aid for accurate, on-the-job inspections across all three product classes.

IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.

IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...

IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy