Search results

The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...

The IPC-7801A standard provides requirements for process control of conveyorized solder reflow ovens. It includes a methodology for performing temperature measurements over time to establish a baseline profile, and then provides requirements to verify repeatability through periodic verification of the oven profile.

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

This document provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies using reflow, vapor phase, laser, selective and wave soldering equipment. The document also includes a troubleshooting guide for addressing common defects which can be attributed to profiling.

IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.

Developed by the OEM council of the IPC, IPC-1720A categorizes electronic assembly manufacturer capabilities and supplies the OEM customer with detailed, substantive information. This program simplifies auditing processes and reduces the frequency of audits, thereby decreasing paperwork and improving efficiency. Company and Site Description, Site Capability Snap Shot, Equipment Profile (Pre-site...

Covers the information requirements for the procurement of material, box build, assembly, system integration, inspection, test, burn-in, delivery and/or distribution of electronic assemblies. 5 pages. Released January 2004.

This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: 1. those assemblies that are assembled with lead-containing or lead-free solder; 2. components that have lead-containing or lead-free second level interconnect terminal finishes and materials; 3. the maximum component temperature not to be exceeded during...

This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.

This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

The IPC J-STD-004C WAM1 standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-STD-004C WAM1 standard may be used for quality control and procurement purposes. Soldering flux materials include the following: liquid flux, paste flux, solder paste, solder cream as well as flux-coated and flux-cored solder...

The IPC-D-640A standard provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-D-640A standard is intended to provide information on the general design requirements for optical fiber, optical cable, hybrid wiring harness assemblies, and Fiber Optic Communications...

While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...

IPC/JEDEC J-STD-035A test method defines the procedures for performing acoustic microscopy on nonhermetic encapsulated electronic devices. IPC/JEDEC J-STD-035A method provides users with an acoustic microscopy process flow for detecting anomalies (delaminations, cracks, mold compound voids, etc.) nondestructively in encapsulated electronic devices while achieving reproducibility

This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...

The IPC-1401A standard specifies the requirements and best practice guidelines for an effective corporate social responsibility (CSR) management system to help an enterprise integrate CSR as a customer requirement into products and value chain activities, as well as to identify and manage CSR risks and opportunities through cooperation with customers and suppliers, to enhance the competitive...

The IPC-9709A standard guideline document establishes an Acoustic Emission (AE) method to enhance evaluation of the performance and reliability of surface mount attachments of electronic assemblies during mechanical loading.

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

This document provides the designer/user with guideline information related to the use of pressure sensitive adhesives (PSAs) for fabrication and assembly of flexible, rigid or rigid-flex printed boards, membrane switches and component attachments. It also provides information on adhesive types available, their inherent strengths, weaknesses, limitations and correct processes needed for creating...

Now updated to align with IPC-7912A for end item DPMO, this document defines consistent methodologies for computation of in-process defects per million opportunities (DPMO) metrics for any evaluation stage in the assembly process. It is intended for use in measuring in-process assembly steps rather than end product determination. Calculation of completed item DPMO is addressed in IPC-7912A. A...

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

The IPC-J-STD-006C-AM1 amendment provides better detail of a solder alloy's maximum allowed deviation about the nominal level of the element's mass than was provided in past alloy standards. The IPC-J-STD-006C-AM1 amendment provided information on negative effects of adding rare earth elements to specific, heavy tin-containing, lead-free solder alloys and propensity of tin whisker formation...