Search results

IPC/WHMA-A-620C-S provides additional requirements to IPC/WHMA-A-620C to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620C-S space addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620C.

When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision B, providing additional requirements to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required IPC training & certification...

IPC/WHMA-A-620AS with Amendment 1 Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A Requirements and Acceptance for Cable and Wire Harness Assemblies. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A of July 2006 by providing additional requirements to ensure the...

This Addendum supplements or replaces specifically identified requirements of IPC-6018C, for high frequency (microwave) printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics.

The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...

This standard is the companion document to IPC-A-630. IPC-HDBK-630 is an in-depth guideline to the design, manufacture, inspection and testing of the high level assembly, or "box" that encloses electronics assemblies. This document was written to help designers, manufacturers and end users of electronic enclosures of electrical and electronic equipment understand the industry's best practices to...

IPC-HDBK-620 is a companion reference to IPC-D-620 ‘‘Design and Critical Process Requirements for Cable and Wiring Harnesses’’ and IPC/WHMA-A-620 ‘‘Requirements and Acceptance for Cable and Wire Harness Assemblies” and provides supporting information and technical rationale for requirements in those standards. This guidance document is highly recommended for anyone who wants to learn the “how” and...

This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.

This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

This specification establishes the general requirements and responsibilities for suppliers and users of printed boards. Serving as the foundation for the IPC-6010 Board Performance Documents series, it describes quality and reliability assurance requirements that must be met. For use with IPC-6012 through IPC-6018. Supersedes IPC-RB-276, IPC-SC-320, IPC-TC-500, IPC-ML-950C. 15 pages. Released July...

Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

Dubbed the "nightmare microsection," this full-color, 24x36-inch (60 x 90 cm) wall poster identifies 42 phenomena that can be seen in cross-sections of plated-through holes. Outstanding visual for supporting discussions of common (and not so common) phenomena. All defects are labeled and match the language used in IPC standards IPC-A-600, IPC-6012 and IPC-T-50. Use this poster as a tool to assist...

IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

This guideline standard is intended to aid in interpretation of the requirements in IPC-9191, "General Guidelines for Implementation of Statistical process Control," specifically for printed board assembly (PBA) manufacture. This document and IPC-9191 should be used together; the standards are cross-referenced to each other in the Appendices of this guideline. This standard promotes process...

During mass soldering, it is important that all solder joints reach the minimum soldering (reflow) temperature to assure metallurgical bonding of the solder alloy and the base metals to be soldered. Metallurgical bonding requires that both surfaces to be soldered, as well as the solder, reach this minimum soldering temperature for a sufficient time to allow the wetting of the solder surfaces. This...

Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...

IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...

This handbook is an essential resource for anyone involved in manufacturing or purchasing PCBs. Hundreds of real-world, full-color photos spotlight more than 650 PCB process defects, with causes and corrective actions for each. IPC-9121 supersedes the PCB sections of IPC-PE-740A. Released March 2016

This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive...

The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...

This new standard supplements existing IPC-6010 series specifications with qualification and performance requirements for in-process and finished printed boards containing embedded passive circuitry (distributive capacitive planes and capacitive or resistive components). 10 pages. Released March 2009. Included in Collections C-105, C-1000 and the 6010 Series

Track the substantive changes in IPC-6012D with this redline product. This is the D revision in its entirety, with each change highlighted on the page. Click the text to launch a pop-up with an explanation of the change from the C revision. Available for download only. IPC-6012D covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without...

This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...

The IPC-2231 standard provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed board assemblies that utilize surface mount and through hole devices.

IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...