The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
Products
IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...
IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.
The IPC-7093B guideline provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093B provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.
This document provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies using reflow, vapor phase, laser, selective and wave soldering equipment. The document also includes a troubleshooting guide for addressing common defects which can be attributed to profiling.
This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...
IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
The IPC-HDBK-001H is a companion document to J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies providing guidance and supporting information for the requirements found in the standard. IPC-HDBK-001H is structured to map paragraph-to-paragraph with the standard, it includes the "how-to" and "why" behind many of the criteria in an easy-to-use reference handbook.
This practical, easy-to-use guide illustrates surface mount solder connections included in the IPC-A-610 Acceptability of Electronic Assemblies standard. While not a replacement for the complete IPC-A-610H standard, this durable reference tool is a valuable instructional resource and job aid for accurate, on-the-job inspections across all three product classes. The guide features clear, color...
IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...
IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
This standard describes the methods of inspecting and cleaning all optical interfaces so that interconnectivity integrity of the optical signal is maintained. The information provided focuses on techniques and methods to accomplish maximum quality of the interface and describes methods of contamination prevention. The target audience for this standard are Manufacturing Operators, Manufacturing...