Search results

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.

The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

This handbook is a compilation of the conformal coating industry's practical experience, and will assist the designers and users of conformal coatings in making informed choices. Users will better understand the properties of the various conformal coatings, the results to be achieved by its application and how to verify that these goals have been met. Use this document as a supplement in...

This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.

IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.

简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻

IPC-CC-830B prescribes qualification and performance requirements of conformal coatings. Amendment 1 provides updated requirements for moisture and insulation resistance and temperature and humidity aging and additional information on coating classifications.

本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。

本書は、実装からはんだ付工程までにおける部品固定用として、また、プリント配線板の一部として長期的に適用される誘電体接着剤に関し、その要求事項と試験方法を提供するものである。9ページ。2014年12月発行。翻訳年 <2022年7月> 目次を見る

本标准的目的是提供和定义用于采购印刷电子基材（基板）的关键特性和测试方法。 包括6份材料规格单。

本标准建立了应用于印刷电子的功能导电材料的分类体系，以及鉴定和质量符合性要求。本标准的目的是为印刷电子产品的从业人员提供必要的技术架构，以便设计和制造符合行业既定标准的产品。

本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。