Search results

IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

This handbook is a compilation of the conformal coating industry's practical experience, and will assist the designers and users of conformal coatings in making informed choices. Users will better understand the properties of the various conformal coatings, the results to be achieved by its application and how to verify that these goals have been met. Use this document as a supplement in...

The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.

This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.

This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...

本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。

本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。

Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...

IPC-6903A标准提供了62个印刷电子行业设计和制造相关的术语及定义。IPC-6903A标准为全球印刷电子行业提供一个共同的语言和知识

This technical paper covers the testing and evaluation of polymeric conformal coatings for moisture and insulation resistance (MIR) and dielectric withstanding voltage (DWV). This effort was initiated by the IPC Conformal Coating Task Group to support technical decisions for IPC coating specification CC-830 as part of the Revision C process. MIR testing was done per a modified method of IPC-TM-650...

This guideline provides an overview of the design process flow for printed electronics based devices, modules and units, and final products.The intent of IPC/JPCA-2291 is to establish a design process flow that will facilitate and improve the practice of printed electronics design. IPC/JPCA-2291 identifies documents such as standards that can be used to assist during the design process flow. 24...

IPC-HDBK-840 supplements the solder mask requirements established in IPC specifications such as IPC-SM-840 and IPC-6012 by providing detailed information on solder mask types, application processes, pre- and post- assembly processes, characteristics and properties that are useful in the selection and use of the most appropriate mask type for a given application. Applicable to solder mask...

The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...

IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...

The IPC-WP-026 white paper explores blockchain as an emerging technology that has a core strength in providing an immutable, auditable, transparent and secure environment for data exchanges. These advantages make it a prime candidate for implementation in the electronics industry. The IPC-WP-026 white paper explores blockchain and its limitations and challenges. It also provides a few directions...

Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin-lead solder. One approach is to fully consume the tin plating by tin-lead solder during the SMT reflow process. This phenomenon of tin...

The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...

本标准是由IPC与广东省数字化学会（DAC）联合开发和发布的国际标准，目的旨在解决业内各厂家提供的电子元器件几何模型及语义信息参差不齐，导致使用方需要重复建模处理且无法复用等问题。 定义如何将电子元器件的设计、仿真、制造等领域的属性关联到电子元器件的三维模型及对应的子部件上的数字化建模，通过规范各供应商按模型交付，工具间（CAD/CAE等）数据集成打通的方式，可实现高效

缺乏统一的元器件可追溯性标准已经导致不必要的资源消耗（例如时间、人力、金钱等）来跟踪事件或部件的来源，并补救相关质量、可靠性等问题。标准缺失也导致难以一致地创建和适当地执行必要的合同。 本标准建立了制造商和供应链可追溯性的最低要求，此要求是基于供需双方协商确定（AABUS）的感知风险。本标准适用于所有产品，制程，组件，部件，元器件，所使用的设备以及由供需双方在印制电路板组件制造以及机械组装中定义的其他项目。