Search results

IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.

The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...

IPC/WHMA-A-620F-RL is a redline document showing the difference from IPC/WHMA-A-620E to IPC/WHMA-A-620F. IPC/WHMA-A-620F-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed/moved text in the IPC/WHMA-A-620E pages and new/revised/moved text in the IPC/WHMA-A-620F pages. This is a visual tool showing the changes as a...

IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.

El IPC/WHMA-A-620E es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620E describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...

IPC/WHMA-A-620E ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620E beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...

IPC/WHMA-A-620E est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620E décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...