Search results

The Joint Industry Guide Material Composition Declaration for Electrotechnical Products has been updated to include the most recent substances for restriction. The JIG-101 is an industry materials declaration guide that facilitates reporting of material content information across the global electrotechnical supply chain. This document sets minimum requirements for a materials declaration. The...

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

IPC-4413 standard covers finished fabrics woven from low Dk electrical grade glass fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by IPC-4413 standard are plain weave.

This guideline covers the requirements for resin coated copper foil intended for use in the formation of high density interconnect surface microvias for printed boards and printed board assemblies. 19 pages. Released November 2007.

This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...

IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

Covers classification and requirements for finished fabrics woven from quartz fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. 13 pages. Released February 1992.

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Covers the classification and requirements for finished fabrics woven from "S" glass, electrical grade glass fiber yarns intended as a reinforcing material in laminated plastics for electrical and electronic use. 12 pages. Released February 1992.

Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.

This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classifications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and definitions for...

Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

IPC-4101D-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 65 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but with...

This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...

Determines the nomenclature, chemical and physical requirements of paper made from cellulose fibers for PWB fabrication. IPC-4110 also includes specification sheets for selecting and purchasing these materials. 11 pages. Released August 1998.

This document covers requirements and test methods for anisotropically conductive adhesive films used to bond and electrically connect components. Applications include the following: flexible PWB-to-glass, flexible PWB-to-rigid PWB, flip chip-to-glass, flip chip-to-flexible PWB, flip chip-to-rigid PWB, and fine pitch SMD. The adhesive film may be supplied pre-attached to a flexible circuit or...

IPC-3406 offers guidelines for selecting electrically conductive adhesives for use in electronics manufacturing as solder alternatives. The process discussion attempts to stay within the bounds of the existing solder assembly infrastructure. Both major types of adhesives, isotropic (conducting equally in all directions) and anisotropic (unidirectional conductivity) are covered. Polymer adhesives...

This standard addresses the industry need for exchange of information regarding the materials used to protect products during shipment between supply chain partners. This standard is one of several in the 175x series of standards that permits segmentation of declaration details based on the subject and scope of the declaration. This standard describes essential information exchange content with...

IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...

IPC 1753 WAM1 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

Suppliers of raw materials for laminate manufacturing now have an industry-approved questionnaire to supply current and potential customers with a self-assessment of their facilities. IPC-1731 gives suppliers of raw materials the opportunity to create a profile of their manufacturing facility(s) that will be consistent with those developed by other industry suppliers. Using the Microsoft Word (TM)...

The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

This specification covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline, and high speed digital electrical and electronic circuits. In addition to updated testing parameters, inspection lot requirements, revised visual acceptance criteria, this revision incorporates a new specification...

IPC 1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported by a PDF form. In the A revision, the data exchange format is specified as Extensible Markup Language (XML) and IPC-1752A relies on third party...

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that was previously removed during the revision A actions. Unless otherwise agreed upon between the user and supplier (AABUS), metal foils...

Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.

This standard provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies. This revision expands the focus of the original standard from reflow profiling to include profiling for vapor phase, laser, selective soldering and wave soldering. The revision also includes a full-color troubleshooting guide for addressing common...

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-4412B exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E" glass) borosilicate glass. Bulk "E" glass, for ease of description, is composed of a blend of raw metal oxides that form a borosilicate glass upon melting. Once...

This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed circuitry and flexible flat cables. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most...

This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 66 individual specification sheets that can be searched using key words. These key words allow the document's user to find materials of a similar nature, but...

IPC-1602A Redline document shows the changes from IPC-1602 to IPC-1602A in a side-by-side comparison of the two documents. This is only available in digital format.

This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides. These materials are to be used as cover material for flexible printed circuitry as well as supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry. The standard does not address...

This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed boards. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most current classification...

IPC-1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported directly by a PDF form. Third party software developers are invited to supply the implementation tool, and one organization has already made a...

IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.

IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...

IPC-1754-Am2, establishes the requirements for the exchanging material and substance data for Products between suppliers and their customers and has been developed through the participation of aerospace, defense, automotive, electronics and solution provider representatives.