Search results

IPC-A-600M is the definitive illustrated guide to printed board acceptability! This four-color document provides photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. Make sure your operators, inspectors, and engineers have the most current industry consensus information. With dozens of new...

IPC-A-610J is the most widely used electronics assembly acceptance standard in the electronics industry. Participants from 31 countries provided their input and expertise to bring this document to the electronics industry. IPC-A-610J is a must-have standard for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed in synergy...

IPC J-STD-001J is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise. IPC J-STD-001J is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies. IPC J-STD-001 is developed in synergy with IPC-A-610 and is...

IPC-6012F, covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical...

This standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain...

The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.

IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...

IPC-6013E standard covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. The IPC-6013E standard incorporates new and updated requirements for final...

IPC-4101E-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets which are found after the main body of the standard. The specification sheets are to be used primarily for rigid and multilayer printed boards for electronic interconnections. The IPC-4101E-WAM1 standard contains 70 individual specification sheets that can be...

IPC-2223E used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. IPC-2223E provides new design...

IPC-J-STD-002E prescribes test methods, defect definitions, acceptance criteria, and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs, and tabs. The IPC-J-STD-002E standard also includes a test method for the resistance to dissolution/dewetting of metallization. IPC-J-STD-002E is intended for use by both supplier and user...

IPC J-STD-004D standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. IPC J-STD-004D standard may be used for quality control and procurement purposes.

The IPC J-STD-003D standard describes solderability determinations that are made to verify that the printed board fabrication processes and subsequent storage have had no adverse effect on the solderability of those portions of the printed board intended to be soldered. Solderability is determined by evaluation of a test specimen which has been processed as part of a panel of boards and...

IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...

The IPC-7095E describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095E provides the useful and practical information to those who use or are considering using BGAs. IPC-7095E provides descriptions on how to...

The IPC-6018D standard covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...

This revision provides effective guidelines in the preparation and attachment of components for printed circuit board assembly and reviews pertinent design criteria, impacts and issues. It contains techniques for assembly (both manual and machines including SMT, BGA and flip chip) and consideration of, and impact upon, subsequent soldering, cleaning, and coating processes. 150 pages. Revised...

This document bears two reference numbers, and may be obtained from IPC or the IEC. IPC-D-350D and IEC 1182-1 are identical in technical content. The IEC version of this document also contains a French translation. The IEC is responsible for the accuracy of that translation.Specifies record formats used to describe printed board products with detail sufficient for tooling, manufacturing and...

The industry's sole standard on the handling, packaging and storage of printed boards. The requirements in this document are intended to protect printed boards from contamination, physical damage, solderability degradation, ESD and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking...

IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

The IPC-J-STD-003C-WAM1&2 standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands and plated-through holes (PTHs). The IPC-J-STD-003C-WAM1&2 standard is not intended to verify the potential of successful processing at assembly or to evaluate design impact on wettability. The IPC-J-STD-003C-WAM1&2...

Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...

This popular document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SOPs, QFPs, BGAs, QFNs and SONs. The standard provides printed board designers with an intelligent land pattern naming convention, zero component rotations for CAD systems and three separate land pattern geometries for each component that allow the user to select...

The IPC-4202C standard covers the requirements for flexible base materials, herein referred to as laminates, prepregs or films, to be used primarily for flexible printed boards for electrical and electronic circuits

IPC-4103B standard covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline and high speed digital electrical and electronic circuits. In addition to better definitions of inclusions and how to properly classify them; redefine "substrates" as, "fabricated sheets"; and a more proper definition...

The IPC-A-640A standard provides acceptance requirements and technical insight that have been removed from acceptance standards for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640A is intended for use by the design engineer, manufacturing engineer, quality engineer and other individuals responsible for tailoring specific...

IPC-4552B standard sets the requirements for Electroless Nickel / Immersion Gold (ENIG) deposit thickness for applications including soldering, wire bonding, and as a contact finish. IPC-4552B standard is used to specify acceptance criteria to meet performance standards for IPC-6010 family of documents including IPC-6012, IPC-6013 and IPC-6018. The ENIG deposit specified using this document will...

IPC-4556A Standard sets the requirements for the use of Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) as a surface finish for printed boards. IPC-4556A standard defines ENEPIG deposit thicknesses for applications including soldering, wire bonding, and as a contact finish.

IPC J-STD-005B standard lists the requirements for qualification and characterization of solder paste. It references test methods, criteria, and metal content, viscosity, slump, solder ball, tack and wetting of solder pastes. Additional support is provided in IPC-HDBK-005, Guide to Solder Paste Assessment.

IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.

IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...

Developed by the OEM council of the IPC, the MQP sets the standard for assessing PWB manufacturer capabilities and allows PCB manufacturers to more easily satisfy customer requirements. This document eases auditing processes and reduces the frequency of audits, thereby decreasing paperwork and enhancing manufacturer effectiveness. Revision A consists of a single, easy to use electronic file...

IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.

This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing to evaluate the effects of mechanical stress, laminate material fracturing, ionic contamination, moisture...

The IPC-7093B guideline provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093B provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

This document standardizes the requirements for power conversion devices (PCDs) for the computer and telecommunications industries. The phrase “power conversion devices” refers to ac to dc and dc to dc modules, converters and power supplies. This specification sets the requirements for design; qualification testing; conformance testing and manufacturing quality/reliability processes, but does not...

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...

This specification establishes the generic requirements for printed boards associated with the IPC-601X series of performance specifications and their quality and reliability assurance requirements. The intent of this specification is to allow the printed board user and supplier flexibility to develop optimum procedures for the procurement and manufacture of printed boards. For use with IPC-6012...

This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides, which are to be used as cover material and/or bondply for flexible printed circuitry, and supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry.

The IPC-7801A standard provides requirements for process control of conveyorized solder reflow ovens. It includes a methodology for performing temperature measurements over time to establish a baseline profile, and then provides requirements to verify repeatability through periodic verification of the oven profile.

The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...