Search results

IPC-D-620 provides design and critical process requirements for the three product classes of cable and wire harness assemblies as well as military/space applications. It is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum Three white papers are included to provide guidance on key topics...

IPC-HERMES-9852 an open industry standard, developed by The Hermes Standard Initiative and approved by IPC, provides a state-of-the-art communication protocol for machine-to-machine communication between equipment units in electronics assembly lines for surface-mount technology (SMT). Thus IPC-HERMES-9852 represents a next generation standard to the technology documented in IPC-SMEMA-9851...

This document provides tests that record changes in surface insulation resistance (SIR) on a representative sample of a printed circuit assembly. It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electrochemical reactions that grossly affect reliability. It uses test vehicles that...

Surface mount pad cratering typically initiates prior to detection by existing electrical monitoring test methods. There are limited instrumentation techniques that are currently available that can identify non-electrical damage and its location to a high degree of accuracy. This guideline document establishes an acoustic emission (AE) method to evaluate the performance and reliability of surface...

While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...

This handbook is an essential resource for anyone involved in manufacturing or purchasing PCBs. Hundreds of real-world, full-color photos spotlight more than 650 PCB process defects, with causes and corrective actions for each. IPC-9121 supersedes the PCB sections of IPC-PE-740A. Released March 2016

IPC-7801 provides process control for solder reflow ovens by baseline and periodic verifications of oven profiles using a standard methodology to demonstrate acceptable oven performance repeatability. Equipment calibration and maintenance guidelines are provided. This standard is intended to verify the operating parameters of the reflow oven. This standard is not intended for the assembly product...

Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...

This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive...

The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...

This new standard supplements existing IPC-6010 series specifications with qualification and performance requirements for in-process and finished printed boards containing embedded passive circuitry (distributive capacitive planes and capacitive or resistive components). 10 pages. Released March 2009. Included in Collections C-105, C-1000 and the 6010 Series

The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SSOPs, TSSOPs, QFPs, BGAs, QFNs and SONs. The standard provides many brand new features, including an intelligent land pattern naming convention, zero component rotations for CAD systems, and a set of three separate land pattern...

This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...

IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. The IPC-2591 standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...

IPC-2591 version 1.1 provides updates to several CFX messages since the original IPC-2591 version release. IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 standard applies to communication between all executable processes in the manufacture of printed...

The purpose of this standard is to provide requirements and best practices for EMS companies to ensure protection of intellectual property for their customers. By using this standard, EMS companies can provide their customers assurance that the intellectual property built into their circuit boards is protected. The document is also a companion to IPC-1071 for printed circuit board manufacturers...

IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...

The IPC-2231 standard provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed board assemblies that utilize surface mount and through hole devices.

IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

IPC 1754 Materials Declaration Standard for Aerospace and Défense is a brand new standard that establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...

The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...

This standard helps companies achieve intended outcomes of a supply chain social responsibility management system, creating value for the company, its customers, its suppliers and other stakeholders. Users of this standard can expect the following outcomes: Enhancement of working conditions, environmental performance and ethics level of the supply chain Fulfillment of compliance obligations and...

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。

IPC-A-610H ist die in der Elektronik-Branche weltweit am meisten verwendete Abnahme-Richtlinie für Elektronikbaugruppen. Die IPC-A-610H-Richtlinie beinhaltet eine allgemeine Aktualisierung des Dokuments, führt mehrere neue oberflächenmontierbare Bauteiltypen ein und entfernt die Kategorie „Anzustreben“ bei den Bewertungen. Teilnehmer aus 29 Ländern haben ihre Beiträge und ihr Fachwissen...