Search results

This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...

This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...

Used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. Revision D provides new design guidance and...

Determines the nomenclature, definitions and requirements for materials made from nonwoven "E" glass fibers. IPC-4130 also includes specification sheets for selecting and purchasing these materials. 14 pages. Released September 1998. Equivalent to IEC Publicly Available Specification (PAS) 62212

Determines the nomenclature, chemical and physical requirements of paper made from cellulose fibers for PWB fabrication. IPC-4110 also includes specification sheets for selecting and purchasing these materials. 11 pages. Released August 1998.

This document covers requirements and test methods for anisotropically conductive adhesive films used to bond and electrically connect components. Applications include the following: flexible PWB-to-glass, flexible PWB-to-rigid PWB, flip chip-to-glass, flip chip-to-flexible PWB, flip chip-to-rigid PWB, and fine pitch SMD. The adhesive film may be supplied pre-attached to a flexible circuit or...

IPC-3406 offers guidelines for selecting electrically conductive adhesives for use in electronics manufacturing as solder alternatives. The process discussion attempts to stay within the bounds of the existing solder assembly infrastructure. Both major types of adhesives, isotropic (conducting equally in all directions) and anisotropic (unidirectional conductivity) are covered. Polymer adhesives...

This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

Originally developed for J-STD-001B, it is also applicable to current assembly standards. Electronics manufacturers are faced with the difficult task of proving that a candidate manufacturing process can produce acceptable hardware, either to the customer of the product, or for internal quality control. Users have to determine many of the process qualification steps on their own. This document...

This standard addresses the industry need for exchange of information regarding the materials used to protect products during shipment between supply chain partners. This standard is one of several in the 175x series of standards that permits segmentation of declaration details based on the subject and scope of the declaration. This standard describes essential information exchange content with...

IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...

This document describes a PWB fabrication data quality rating system used by fabricators to evaluate incoming data package integrity. Includes information on conformance to both fabricator and customer design rules and can be used by printed board designers as an output quality check. 16 pages. Released February 1999.

IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...

Suppliers of raw materials for laminate manufacturing now have an industry-approved questionnaire to supply current and potential customers with a self-assessment of their facilities. IPC-1731 gives suppliers of raw materials the opportunity to create a profile of their manufacturing facility(s) that will be consistent with those developed by other industry suppliers. Using the Microsoft Word (TM)...

This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.

The IPC-4552A performance specification sets requirements for Electroless Nickel/Immersion Gold (ENIG) deposit thicknesses for applications including soldering, wire bonding and as a contact finish. The IPC-4552A is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) and original equipment manufacturers (OEM). The IPC-4552A standard may be...

IPC-A-600K-DE ist das ultimative, illustrierte Handbuch für Annahmekriterien von Leiterplatten! Diese Richtlinie im Vierfarb-Druck enthält Bilder und Illustrationen der Zustände „Anzustreben“, „Zulässig“ und „Fehler“, die an unbestückten Leiterplatten im Innern oder auf der Oberfläche beobachtbar sind. Stellen Sie sicher, dass Ihre Mitarbeiter, Prüfer und Ingenieure über die aktuellste Version...

Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

This document provides users of underfill material with guidance in selecting and evaluating underfill material for assembly solder joints second-level interconnects. Underfill material is used to increase reliability of electronic devices by two methods: alleviate coefficient of thermal expansion (CTE) mismatch (between the electronic package and the assembly substrate) and/or increase mechanical...

IPC-2221B is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision B are new criteria for conductor characteristics, surface finishes, via protection...

プリント基板の受入れに関する図解付きガイドの決定版！この4色刷りの文書では、ベアプリント基板の内部または外部から観察可能なコンディションについて、目標、許容可能、不適合といったそれぞれ状態を写真とイラストで解説している。本書は、オペレータ/検査担当者/エンジニアに必要な最新の業界コンセンサス情報を提供するものである。この改版(M版)では多数の写真と図を更新するとともに、プリント基板の端部めっき、キャビティ、端部のバリ、ディウェッティング、導体厚さ、アニュラリング(位置合わせ)内の銅の侵入、めっきボイド等のトピックを新規に、あるいは拡張して解説している。本書の内容は、IPC-6012FとIPC-6013Eに記載する許容要件と同期している。IPC-A-600Kに優先する。

The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...