Search results

Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry Amendment 1 to IPC-4204A modifies the standard by replacing five sections in the document (sections: 1.1.2 Specific Designation; 2.1 IPC; 2.5 ISO; 3.5.2 Wrinkles, Creases, Streaks and Scratches; and 3.9 Electrical Requirements) to clarify the meanings of these sections.

Amendment 1 to IPC-4562A re-inserts the specification sheet IPC-4562/6 (CU-W6) back into the IPC-4562A document that was previously removed when the standard was revised to it's a revision from its original release in April 2008. Also included in this Amendment 1 are all references to the IPC-4562/6 (CU-W6) in section 1.2.4.1, the Table A1, the summary of all specification sheets as well as the...

Amendment 1 to the J-STD-004B corrects editorial mistakes throughout the document and addresses Halogen-free and Halide-free terminology and requirements in fluxes.

IPC-6012E-AM1是IPC-6012E的修订本，澄清了再流焊SnPb或HASL镀层中退润湿和焊料回缩之间的区别。 该修订本还为成品印制板的最小外部导体厚度提供了修订标准，并为内部电镀层的最小厚度提供了新的接受标准。

Acesta este un amendament la standardul IPC J-STD-001F, un standard industrial recunoscut și adoptat, acoperind cerințe de materiale și procese. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire, reprezentări grafice noi pentru montarea...

Bu döküman; kaplı delikiçine sahip olan veya olmayan tek yüzlü, çift yüzlü baskı devre kartları ve kör/gömülü geçiş deliklerine sahip olan veya olmayan çok katmanlı baskı devre kartları ile metal çekirdekli kartları içeren sert baskı devre kartlarının kalifikasyonunu ve performansını kapsamaktadır. Son kaplama ve yüzey kaplama gereklilikleri, iletkenler, delikler/geçiş delikleri, kabul testlerinin...

Ergänzung 1 zu IPC-7711/21C-DE, das Dokument enthält Verfahren für das Entfernen und Montieren von D-Pak-Komponenten.

Enmienda 1 al IPC-7711/21C, el documento proporciona los procedimientos para la extracción y la instalación de componentes D-Pak.

IPC-7711/21C的修订本1，本文件提供D-Pak元器件的去除和安装程序.

Amendement 1 à IPC-7711 / 21C fournit des procédures supplémentaires de retrait et d'installation

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 1 to IPC-4552 replaces the Table 3-1 Requirements of Electroless Nickel Immersion Gold Plating plus also replaces all of sections 3.2.1 Immersion Nickel Thickness and 3.2.2 Immersion Gold Thickness in the original release of the IPC-4552. The Amendment 1 permits the use of thinner gold (≥4 µm...

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 2 to IPC-4552 is a new section in the original release of the IPC-4552. The Amendment 2 provides the “rules” by which any rework and/or repair of a printed board's ENIG surface finish is allowed. Effective September 2012.

The Amendment 1 to IPC-4556 made the following changes to the base specification: a) It added the absolute value of the maximum thickness for the immersion gold of 0.070 μm [2.8 μin] that accompanies the statistically valid minimum immersion gold thickness; b) It added two more photomicrograph images to provide better information on identifying nickel hyper corrosion; c) It added the basis of...

The amendment 2 to IPC-9121 provides new troubleshooting topics on hole quality, laser drilling, microvias, drill smear, electroless nickel, organic solderability preservative (OSP) and rigid-flex boards.

IPC-9121 AM1 is an amendment to IPC-9121 which provides updates to the Hole Preparation/Protection and Interconnect Formation sections, covering troubleshooting topics and guidance on nonconductive plugging paste, microvias and pattern plating rim voids. IPC-9121 AM1 also includes a new section on Flexible Circuits.

The Amendment 2 to IPC-4103A-WAM1 made four fundamental changes to the base standard: All references to the epoxy curative of DICY (dicyandiamide) were removed; Opaque foreign inclusions were more specifically defined and limited; The optional properties of thermal conductivity for both laminates and bonding layers were added; and The dielectric constant (permittivity) ranges were specifically...

The IPC-1791-Am1 provides revisions and clarifications for requirements pertaining to CAGE Code, citizenship, security, foreign person access, traceability records and NIST SP 800-171 compliance.

本手册可供任何生产制造或采购印制板的人员作为基本资源。数百张真实的全彩色照片聚焦了650多个印刷电路板工艺缺陷，每个缺陷都有其分析原因和纠正措施。IPC-9121是取代1997年12月发布 的IPC-PE-740A中的PCB部分。2016年3月发布9121英文母标准，2018年年4月发布修订本1，修订本1于2020年4月翻译。详情参见目录。

Ceci est un amendement de l’IPC J-STD-001F, une norme reconnue selon un consensus industriel décrivant les matériaux et les procédés. Les changements incluent, mais ne sont pas limités à, une révision des exigences de remplissage minimum des trous métallisés, des critères de vide pour les BGA, de nouveaux dessins pour plusieurs types de composants montés en surface, des critères de collage révisés...

El documento IPC J-STD-001D-Am 1 proporciona la primera revisión importante a la que se han sometido los requisitos de limpieza de la norma J-STD-001 desde hace más de 25 años y con la que se cambia el modo en el que la industria abordará los requisitos relativos a limpieza y residuos. Entre los puntos destacados de esta enmienda se encuentra un requisito para fabricantes de productos de clase 2 y...

IPC J-STD-001D-Am 1 constitue la première révision majeure des exigences de propreté de la norme J-STD-001 depuis plus de 25 ans et modifie la façon dont l’industrie doit répondre aux exigences de nettoyage et de résidus. Les points forts de cette modification incluent, sauf spécification contraire de l’utilisateur, l’obligation pour les fabricants de produits des Classes 2 et 3 de se soumettre à...

该文件是IPC-A-610F的修订本，是电子组装可接受性要求的公认行业标准。变化包括，但不仅限于：镀通孔、最小填充要求、有非塌落焊料球的球栅阵列空洞标准和加固标准。

Acesta este un amendament la standardul IPC-A-610F, un standard industrial recunoscut și adoptat, acoperind cerințe de acceptabilitate ale ansamblurilor electronice. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire și cerințe noi pentru...

Ceci est un amendement à l’IPC-A-610-F, une norme reconnue selon un consensus industriel décrivant les exigences d’acceptabilité des assemblages électroniques. Les changements incluent, mais ne sont pas limités à, une révision des exigences de remplissage minimum des trous métallisés, des critères de vide pour les BGA à billes non affaissables et des critères de collage. Publiée en Décembre 2015

本改訂は、IPC-6012Dで定められた銅ラップめっきの測定に関し、既存の許容基準に対し変更を加えるものである。本改訂は、新規設計品に施行される受け入れ要件の導入に伴い、旧来の設計品に追加的な品質認定作業を課すことのないよう、設計の有効日(2018年1月1日の前日まで、また、2018年1月1日以降)を基準に、クラス3製品の銅ラップめっきに二重基準を施行するものである。IPC-6012Dに記載する「銅ラップめっきの要求事項」の対象となる旧来の製品に対しては、本改訂は適用されない。8ページ。2019年1月翻訳。