Search results

IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

This standard defines classification levels and testing thresholds to assess the reliability of e-textile wearables in their intended end-use environments. It establishes baseline criteria for evaluating durability under mechanical stressors—such as abrasion, flexing, and UV exposure—and environmental conditions including perspiration, washing, water/saltwater, alkalis, and acids. Supported by 14...

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

This standard identifies categories and establishes a designation system and qualification/quality conformance requirements and test methods for conductive yarns used in e-textiles. The standard enables suppliers of conductive yarns to demonstrate their products’ performance against real-world processing and end-use environments, leveraging eight IPC Test Methods developed specifically for...

IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...

Provides information on design characteristics and the application of solderless surface mount connectors, including conductive adhesives to aid IC package and board interconnection. 34 pages. Released January 1994.

The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classifications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and definitions for...

IPC-HDBK-9798A provides guidelines and information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information of press fit, and fundamentals for these processes. IPC-HDBK-9798A handbook is a supporting document to the IPC-9797A standard.

The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.

This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...

IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...

IPC-9797A 是针对压接技术的要求及验收达成共识的唯一行业标准。IPC-9797A 规定了无焊压接针连接的材料、方法、测试和验收准则。IPC-9797A 得到了 IPC-HDBK-9798 “汽车应用及其他高可靠性应用要求的压接标准使用手册”的支持，供希望了解压接技术更多信息和解释的人员使用

IPC-9797Aはプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。 プレスフィット技術に関する詳細な情報と説明については、IPC-HDBK-9798 “車載要求事項およびその他高信頼性用途のプレスフィット規格のためのハンドブック”にて補足しているので、そちらを参照のこと。

This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...

The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...

IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...

IPC-WP-024 is a white paper which discusses the issues associated with reliability of smart textiles (e-textiles structures) following multiple washing cycles and emphasizes efforts that industry and research laboratories must undertake to make e-textile structures more robust and able to be washed similarly to everyday textile products (e.g., underwear, clothing, home textiles and technical...

IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

The IPC-WP-026 white paper explores blockchain as an emerging technology that has a core strength in providing an immutable, auditable, transparent and secure environment for data exchanges. These advantages make it a prime candidate for implementation in the electronics industry. The IPC-WP-026 white paper explores blockchain and its limitations and challenges. It also provides a few directions...

This white paper is a benchmarking exercise of e-textile integrations, providing an introductory categorization of how the current market sector is using textile-based electrical components to achieve integrated functionality. This peer assessment provides a baseline understanding of e-textile process techniques, requirements and resources within this emerging sector.

The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...

本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。

This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...