Products

IPC-SM-840 - Revision E - Standard Only

Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  12/22/2010
Language
English
Current Revision
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-9704 - Revision A - Standard Only

Printed Circuit Assembly Strain Gage Test Guideline

Document #:
IPC/JEDEC-9704
Revision
A
Product Type
Standard Only
Released:  02/03/2012
Language
English
Current Revision
Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...

IPC-9691 - Revision B - Standard Only

User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

Document #:
IPC-9691
Revision
B
Product Type
Standard Only
Released:  09/08/2016
Language
English
Current Revision
This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing to evaluate the effects of mechanical stress, laminate material fracturing, ionic contamination, moisture...

IPC-CC-830 - Revision C - Standard Only

Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies

Document #:
IPC-CC-830
Revision
C
Product Type
Standard Only
Released:  01/15/2019
Language
English
Current Revision
The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

IPC-CH-65 - Revision B - Standard Only

Guidelines for Cleaning of Printed Boards and Assemblies

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  07/25/2011
Language
English
Current Revision
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
IPC-9701B Cover Image

IPC-9701 - Revision B - Standard Only

Thermal Cycling Test Method for Fatigue Life Characterization of Surface Mount Attachments

Document #:
IPC-9701
Revision
B
Product Type
Standard Only
Released:  04/12/2022
Language
English
Current Revision
The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...
IPC-D-620A Cover Image

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Released:  02/28/2022
Language
English
Current Revision
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
IPC-7525C Cover Image

IPC-7525 - Revision C - Standard Only

Stencil Design Guidelines

Document #:
IPC-7525
Revision
C
Product Type
Standard Only
Released:  02/28/2022
Language
English
Current Revision
The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.
IPC-7526A Cover Image

IPC-7526 - Revision A - Standard Only

Stencil and Misprinted Board Cleaning Handbook

Document #:
IPC-7526
Revision
A
Product Type
Standard Only
Released:  04/12/2022
Language
English
Current Revision
IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.
no-image-available

IPC-9203 - Revision A - Standard Only

Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle

Document #:
IPC-9203
Revision
A
Product Type
Standard Only
Released:  02/16/2023
Language
English
Current Revision
While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...

IPC-4591 - Revision A - Standard Only

Requirements for Printed Electronics Functional Conductive Materials

Document #:
IPC-4591
Revision
A
Product Type
Standard Only
Released:  01/01/2018
Language
English
Current Revision
The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...
IPC-9202A Cover Image

IPC-9202 - Revision A - Standard Only

Material and Process Characterization/Qualification Test Protocol for Assessing Electrochemical Performance Using the IPC-B-52 Test Assembly

Document #:
IPC-9202
Revision
A
Product Type
Standard Only
Released:  10/28/2022
Language
English
Current Revision
The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...

IPC-SM-817 - Revision A - Standard Only

General Requirements for Dielectric Surface Mount Adhesives

Document #:
IPC-SM-817
Revision
A
Product Type
Standard Only
Released:  12/23/2014
Language
English
Current Revision
Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC-QRG-WHA -Revision E - Training & Reference Guide

Wire Harness Assembly Training & Reference Guide

Document #:
IPC-DRM-WHA
Revision
E
Product Type
Training & Reference Guide
Released:  10/20/2023
Language
English
Current Revision
The IPC-DRM-WHA-E desk reference manual contains illustration/images of wire harness assemblies for IPC/WHMA-A-620E standard. IPC-QRG-WHA-E explains the basic acceptance criteria for wire harness assemblers, crimp operators, and QA personnel. The IPC-QRG-WHA-E is handy reference and training tool but does not replace the criteria found in IPC/WHMA-A-620E. IPC-QRG-WHA-E covers: wire types, gauges...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
Wire Harness Desk Reference Manual Cover Image

IPC-QRG-WHA - Training & Reference Guide

Wire Harness Assembly Training & Reference Guide

Document #:
IPC-QRG-WHA
Revision
D
Product Type
Training & Reference Guide
Released:  02/14/2022
Language
English
Current Revision
The IPC-DRM-WHA-D desk reference manual contains illustration/images of wire harness assemblies for IPC/WHMA-A-620D standard. IPC-QRG-WHA-D explains the basic acceptance criteria for wire harness assemblers, crimp operators, and QA personnel. The IPC-QRG-WHA-D is handy reference and training tool but does not replace the criteria found in IPC/WHMA-A-620D. IPC-QRG-WHA -Dcovers: wire types, gauges...
IPC-8401 Cover Image

IPC-8401 - Standard Only

Guidelines for In-Mold Electronics

Document #:
IPC-8401
Revision
Original Version
Product Type
Standard Only
Released:  10/22/2024
Language
English
Current Revision
IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC-5701 - Standard Only

Users Guide for Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5701
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
Tackling PCB cleanliness is a tough job; residues on printed circuit boards are directly related to the reliability of the produced hardware and can result in serious failures if not known or monitored. But how do you measure "cleanliness"? How clean is "clean"? The IPC-5701 provides guidance into how these issues should be approached and specified in purchasing documents, addressing levels of...

IPC-9241 - Standard Only

Guidelines for Microsection Preparation

Document #:
IPC-9241
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2017
Language
English
Current Revision
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

IPC-9505 - Standard Only

Guideline Methodology for Assessing Component and Cleaning Materials Compatibility

Document #:
IPC-9505
Revision
Original Version
Product Type
Standard Only
Released:  10/12/2017
Language
English
Current Revision
The IPC-9505 standard provides details of test methodologies for cleaning chemistry compatibility with electronic assembly materials that replace those in MIL-STD-202 Method 215 for testing electronic and electrical components such as capacitors, resistors, transformers and inductors. The test methods can also be used, when applicable, to parts not covererd by military specifications or drawings
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
no-image-available

IPC-9708 - Standard Only

Test Methods for Characterization of Printed Board Assembly Pad Cratering

Document #:
IPC-9708
Revision
Original Version
Product Type
Standard Only
Released:  12/14/2010
Language
English
Current Revision
Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...
no-image-available

IPC-9706 - Standard Only

Mechanical Shock In-situ Electrical Metrology Test Guidelines for FCBGA SMT Component Solder Crack and Pad Crater/Trace Crack Detection

Document #:
IPC-9706
Revision
Original Version
Product Type
Standard Only
Released:  01/14/2014
Language
English
Current Revision
Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...

IPC-9301 - Standard Only

Numerical Analysis Guidelines for Microelectronics Packaging Design and Reliability

Document #:
IPC/JEDEC-9301
Revision
Original Version
Product Type
Standard Only
Released:  01/15/2019
Language
English
Current Revision
The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

IPC-9702 - Standard with Amendment 1

Monotonic Bend Characterization of Board-Level Interconnects

Document #:
IPC-9702
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  08/18/2015
Language
English
Current Revision
This publication is intended to characterize the frature strength of a component's board level-interconnect by providing a common method of establishing the fracture resistance to flexural loading that may occur during conventional non-cyclic board assembly and test operations. The document is applicable to surface mount components attached to printed wiring boards using conventional solder reflow...

IPC-8701 - Standard Only

Final Acceptance Criteria Standard for PV Modules-Final Module Assembly

Document #:
IPC-8701
Revision
Original Version
Product Type
Standard Only
Released:  07/16/2014
Language
English
Current Revision
IPC-8701 presents acceptance guidelines for the solar panel in final module assembly. The intent of this standard is to cover crystalline solar modules.Some of the content may be applicable to other photovoltaic modules such as thin film. The standard reviews and includes acceptance guidelines for incoming and finished frames, frame assembly, sealant, tape, junction box assembly, and bus bar...

IPC/JPCA-6901 - Standard Only

Application Categories for Printed Electronics

Document #:
IPC/JPCA-6901
Revision
Original Version
Product Type
Standard Only
Released:  08/26/2015
Language
English
Current Revision
This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

IPC-6903 - Standard Only

Terms and Definitions for the Design and Manufacture of Printed Electronics (Additive Circuitry)

Document #:
IPC-6903
Revision
D
Product Type
Standard Only
Released:  10/29/2015
Language
English
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

IPC-HDBK-830 - Revision A - Handbook

Guidelines for Design, Selection, and Application of Conformal Coatings

Document #:
IPC-HDBK-830
Revision
A
Product Type
Handbook
Released:  10/07/2013
Language
English
Current Revision
This handbook is a compilation of the conformal coating industry's practical experience, and will assist the designers and users of conformal coatings in making informed choices. Users will better understand the properties of the various conformal coatings, the results to be achieved by its application and how to verify that these goals have been met. Use this document as a supplement in...

IPC-WP-019 - Revision B - White Paper

An Overview on Global Change in Ionic Cleanliness Requirements

Document #:
IPC-WP-019
Revision
B
Product Type
White Paper
Released:  10/07/2020
Language
English
Current Revision
The IPC-WP-019B white paper was created to support the IPC-J-STD-001H standard and provides additional guidance, examples, and understanding of Section 8.0 Cleaning and Residue Requirements. The IPC-WP-019B has information on how to meet the requirements of IPC-J-STD-001H chapter 8. Recommentded for those looking to implement the requirements of IPC-J-STD-001H standard, chapter 8. 0..
IPC-WP-116A Cover Images

IPC-WP-116 - Revision A - White Paper

Guidance for the Development and Implementation of a Foreign Object Debris (FOD) Control Plan

Document #:
IPC-WP-116
Revision
A
Product Type
White Paper
Released:  03/01/2022
Language
English
Current Revision
The IPC-WP-116A white paper provides guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies. Guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies is provided. A template for developing a Foreign Object Debris (FOD) Control...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-CC-830 - Revision B - Standard with Amendment 1

Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies

Document #:
IPC-CC-830
Revision
B
Product Type
Standard with amendment(s)
Released:  10/23/2008
Language
English
This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

IPC-9701 - Revision A - Standard Only

Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments

Document #:
IPC-9701
Revision
A
Product Type
Standard Only
Released:  02/01/2006
Language
English
Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...

IPC-7525 - Revision B - Standard Only

Stencil Design Guidelines

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  10/24/2011
Language
English
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.
no-image-available

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Language
English
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-4413 - Amendment 1

Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

Document #:
IPC-4413
Revision
Original Version
Product Type
Amendment
Released:  01/29/2026
Language
English
Current Revision
IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.

IPC-SM-840 - Revision E - Standard Only

永久性阻焊剂和挠性覆盖材料的鉴定和性能规范

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  11/20/2012
Language
Chinese
Current Revision
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻
no-image-available

IPC-9203 - Revision A - Standard Only

IPC-9203およびIPC-B-52標準テストビークルに関するユーザーガイド

Document #:
IPC-9203
Revision
A
Product Type
Standard Only
Released:  01/02/2024
Language
Japanese
Current Revision
材料の適合性を検証するにあたり、業界では種々のテストビークルが存在し活用されている。IPC-B-52試験基板は実生産で用いられる材料と工程を具体的に表現したものであり、イオンクロマトグラフと表面絶縁抵抗(SIR)の両試験のニーズを満たすテストビークルである。IPC-9203Aに示す規格はIPC-B-52テストビークルに対応し、製造工程の評価や、選択した製造材料セットと工程が清浄度の観点から適合しているという客観的証拠を提供する場合に利用できる。またIPC-9203Aに示すユーザーガイドラインはIPC-9202の手引き文書として作成されており、製造者が材料と工程の適合性を実証する場合の規定「～することが望ましい」と「～すること(する必要がある)」という点について明確に提示している。
no-image-available

IPC-9202 - Revision A - Standard Only

IPC-B-52試験用組立品を用いた、電気化学的性能評価のための材料・工程の特性評価/認定試験の方法

Document #:
IPC-9202
Revision
A
Product Type
Standard Only
Released:  09/22/2023
Language
Japanese
Current Revision
概説 本書、IPC-9202A「材料・工程の特性評価/認定試験の方法」は、プリント回路組立品(PCA)の代表的なサンプル上の表面絶縁抵抗(SIR)の変化を記録するものである。この試験は、はんだ付後に外層に残るはんだ由来のフラックスまたはその他の工程残さが原因で不要な電気化学的反応を引き起こし、信頼性に重大な影響を及ぼす可能性について定量化するものである。 この試験では、実際の生産工程において電子回路の代表的なものとなるような基板をテストビークルとして使用する。これは、定量的かつ定性的なデータの両方を得ることができる試験である。 IPC-9202Aに紹介する試験は、提案された製造工程や工程変更を用いた場合に、生産するハードウェア(製品)の最終的な性能が電気化学的リスクに対し許容可能であるということを示すための「工程認定」用として使用することができる。工程変更には組立工程の手順...
no-image-available

IPC-7525 - Revision C - Standard Only

模板设计指导 Stencil Design Guidelines

Document #:
IPC-7525
Revision
C
Product Type
Standard Only
Released:  11/01/2023
Language
Chinese
Current Revision
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
no-image-available

IPC-SM-817 - Revision A - Standard Only

表面実装用誘電体接着剤に関する一般要求事項

Document #:
IPC-SM-817
Revision
A
Product Type
Standard Only
Released:  09/14/2022
Language
Japanese
Current Revision
本書は、実装からはんだ付工程までにおける部品固定用として、また、プリント配線板の一部として長期的に適用される誘電体接着剤に関し、その要求事項と試験方法を提供するものである。9ページ。2014年12月発行。翻訳年 <2022年7月> 目次を見る
no-image-available

IPC-4921 - Revision A - Standard Only

印刷电子基材（基板）要求

Document #:
IPC-4921
Revision
A
Product Type
Standard Only
Released:  04/12/2019
Language
Chinese
Current Revision
本标准的目的是提供和定义用于采购印刷电子基材（基板）的关键特性和测试方法。 包括6份材料规格单。
no-image-available

IPC-4591 - Revision A - Standard Only

印刷电子功能导电材料要求

Document #:
IPC-4591
Revision
A
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
本标准建立了应用于印刷电子的功能导电材料的分类体系，以及鉴定和质量符合性要求。本标准的目的是为印刷电子产品的从业人员提供必要的技术架构，以便设计和制造符合行业既定标准的产品。
no-image-available

IPC-7525C-Japanese - Standard Only

ステンシル設計ガイドライン

Document #:
IPC-7525
Revision
C
Product Type
Standard Only
Released:  10/17/2022
Language
Japanese
Current Revision
本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。
no-image-available

IPC-CC-830 - Revision C - Standard Only

プリント配線板組立用電気絶縁化合物の認定および性能

Document #:
IPC-CC-830
Revision
C
Product Type
Standard Only
Released:  03/12/2021
Language
Japanese
Current Revision
規格「IPC-CC-830C」は、電気絶縁化合物 (コンフォーマルコーティング) の認定および適合要件について確立するものである。これは、最小限の冗長テストで材料の最大の信頼性を得ることを目的として、設計および構築されてきたものである。規格「IPC-CC-830C」は次の項目を対象とする： フォーマルコーティング剤の認定および認定の維持 (表3-1、コラムAおよびB)。 コンフォーマルコーティング剤の特性に関する品質適合性 (表3-1、コラムC)。 本規格においてコンフォーマルコーティングという用語は、プリント配線板組立に使用される保護コーティングのタイプを指す場合に用いられる。コンフォーマルコーティングは単に機械的な支持をもたらすものではなく、湿気および汚染から基板を保護し、電気絶縁を付与することを目的としている。

IPC-SM-817 - Revision A - Standard Only

表面贴装用绝缘粘合剂通用规范

Document #:
IPC-SM-817
Revision
A
Product Type
Standard Only
Released:  10/29/2015
Language
Chinese
Current Revision
涵盖了从贴装到焊接制程用于固定元器件的绝缘粘合剂的要求和测试方法并作为印制板的一部分的长期性能。共9页。2014年12月发布。2015年6月翻译。

IPC-CH-65 - Revision B - Standard Only

印制板及组件清洗指南

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  05/09/2014
Language
Chinese
Current Revision
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
no-image-available

IPC-CC-830 - Revision C - Standard Only

印制线路组件用电气绝缘化合物的鉴定及性能

Document #:
IPC-CC-830
Revision
C
Product Type
Standard Only
Released:  05/29/2019
Language
Chinese
Current Revision
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
no-image-available

IPC-9204 - Standard Only

印刷电子柔性与可拉伸性能测试指南

Document #:
IPC-9204
Revision
B
Product Type
Standard Only
Released:  06/18/2019
Language
Chinese
Current Revision
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
no-image-available

IPC-9691 - Revision B - Standard Only

IPC-TM-650 测试方法2.6.25耐导电阳极丝（CAF）及其他内部电化学迁移（ECM）测试用户指南

Document #:
IPC-9691
Revision
B
Product Type
Standard Only
Released:  04/11/2018
Language
Chinese
Current Revision
本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上
no-image-available

IPC-9704 - Revision A - Standard Only

印制板应变测试指南

Document #:
IPC/JEDEC-9704
Revision
A
Product Type
Standard Only
Released:  02/15/2026
Language
Chinese
Current Revision
本文件对印制板（PWB）制造过程中印制板组件的应变测试制定了详细的指南，这些制造过程包括组装、测试、系统集成及印制板的周转/运输。 本文件建议的程序使印制板组装厂能够独立进行所要求的应变测试，并为印制板翘曲测量和风险等级评估提供了量化的方法。

IPC-7525 - Revision B - Standard Only

Designrichtlinie für Druckschablonen

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  04/15/2013
Language
German
Current Revision
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
no-image-available

IPC-6903 - Revision A - Standard Only

印刷电子设计与生产的术语及定义

Document #:
IPC-6903
Revision
A
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
IPC-6903A标准提供了62个印刷电子行业设计和制造相关的术语及定义。IPC-6903A标准为全球印刷电子行业提供一个共同的语言和知识
no-image-available

IPC-WP-017 - White Paper

What Conformal Coaters Wish Designers Knew About Coatings

Document #:
IPC-WP-017
Revision
Original Version
Product Type
White Paper
Released:  10/30/2015
Language
English
Current Revision
This technical paper covers the testing and evaluation of polymeric conformal coatings for moisture and insulation resistance (MIR) and dielectric withstanding voltage (DWV). This effort was initiated by the IPC Conformal Coating Task Group to support technical decisions for IPC coating specification CC-830 as part of the Revision C process. MIR testing was done per a modified method of IPC-TM-650...
no-image-available

IPC-WP-016 - White Paper

IPC Round Robin Study

Document #:
IPC-WP-016
Revision
Original Version
Product Type
White Paper
Released:  02/07/2013
Language
English
Current Revision
A discussion was held in the 5-33AWG (ad hoc working group), on things that conformal coat professionals (materials and processes) wish designers knew about conformal coating. The 5-33AWG group is comprised of individuals from OEMs, coating suppliers, and test lab personnel.

IPC-2291 - Standard Only

Design Guideline for Printed Electronics

Document #:
IPC-2291
Revision
Original Version
Product Type
Standard Only
Released:  07/30/2013
Language
English
This guideline provides an overview of the design process flow for printed electronics based devices, modules and units, and final products.The intent of IPC/JPCA-2291 is to establish a design process flow that will facilitate and improve the practice of printed electronics design. IPC/JPCA-2291 identifies documents such as standards that can be used to assist during the design process flow. 24...

IPC-HDBK-840 - Handbook

Solder Mask Handbook

Document #:
IPC-HDBK-840
Revision
Original Version
Product Type
Handbook
Released:  08/01/2006
Language
English
Current Revision
IPC-HDBK-840 supplements the solder mask requirements established in IPC specifications such as IPC-SM-840 and IPC-6012 by providing detailed information on solder mask types, application processes, pre- and post- assembly processes, characteristics and properties that are useful in the selection and use of the most appropriate mask type for a given application. Applicable to solder mask...
IPC-4592 Cover Image

IPC-4592 - Standard Only

Requirements for Printed Electronics Functional Dielectric Materials

Document #:
IPC-4592
Revision
Original Version
Product Type
Standard Only
Released:  08/12/2022
Language
English
The IPC-4592 standard establishes the classification system, the qualification and quality conformance requirements for functional dielectric materials used in printed electronics applications. The intended applications include but are not limited to dielectric materials as protective dielectric or insulator/insulation layer(s), capacitive layer(s), crossovers and encapsulant(s) for devices in...

IPC-4921 - Standard Only

Requirements for Printed Electronics Base Materials (Substrates)

Document #:
IPC/JPCA-4921
Revision
Original Version
Product Type
Standard Only
Released:  07/16/2012
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible and rigid base dielectric materials for manufacture of printed electronics. It includes base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most current classification system...
no-image-available

IPC-4591 - Standard Only

Requirements for Printed Electronics Functional Conductive Materials

Document #:
IPC/JPCA-4591
Revision
Original Version
Product Type
Standard Only
Released:  12/18/2012
Language
English
This document provides comprehensive data to help users more easily determine material performance, capabilities, and compatibility of functional conductive materials for the manufacture of printed electronics. It includes: classification schemes based on composition, conductor type, and post-processing structure; functional conductive material specification sheets to present properties for the...

IPC-WP-021 - White Paper

Considerations of New Classes of Coatings for IPC-CC-830 Revision C

Document #:
IPC-WP-021
Revision
Original Version
Product Type
White Paper
Released:  12/16/2019
Language
English
Current Revision
The IPC-WP-021 white paper considers conformal coatings, like many high-performance materials, have evolved considerably since the 1990s. New coatings, such as fluoropolymers or hybrid coatings, have come on the market, many of which offer superior protection characteristics, but do not fit into the existing classifications of either MIL-I-46058 or IPC-CC-830. The IPC-WP-021 white paper discusses...
no-image-available

IPC-9703 - Standard Only

IPC/JEDEC Mechanical Shock Test Guidelines for Solder Joint Reliability

Document #:
IPC/JEDEC-9703
Revision
Original Version
Product Type
Standard Only
Released:  03/18/2009
Language
English
Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...

IPC-D-620 - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
Original Version
Product Type
Standard Only
Released:  12/08/2015
Language
English
IPC-D-620 provides design and critical process requirements for the three product classes of cable and wire harness assemblies as well as military/space applications. It is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum Three white papers are included to provide guidance on key topics...

IPC-9202 - Standard Only

Material and Process Characterization/Qualification Test Protocol for Assessing Electrochemical Performance

Document #:
IPC-9202
Revision
Original Version
Product Type
Standard Only
Released:  10/20/2011
Language
English
This document provides tests that record changes in surface insulation resistance (SIR) on a representative sample of a printed circuit assembly. It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electrochemical reactions that grossly affect reliability. It uses test vehicles that...

IPC-9709 - Standard Only

Test Guidelines for Acoustic Emission Measurement during Mechanical Testing

Document #:
IPC-9709
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
Surface mount pad cratering typically initiates prior to detection by existing electrical monitoring test methods. There are limited instrumentation techniques that are currently available that can identify non-electrical damage and its location to a high degree of accuracy. This guideline document establishes an acoustic emission (AE) method to evaluate the performance and reliability of surface...

IPC-9203 - Standard Only

Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle

Document #:
IPC-9203
Revision
Original Version
Product Type
Standard Only
Released:  04/27/2012
Language
English
While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...

IPC-7526 - Standard Only

Stencil and Misprinted Board Cleaning Handbook

Document #:
IPC-7526
Revision
Original Version
Product Type
Standard Only
Released:  02/13/2007
Language
English
Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...

IPC-2292 - Standard Only

Design Standard for Printed Electronics on Flexible Substrates

Document #:
IPC-2292
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2018
Language
English
IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...
no-image-available

IPC/PERM-WP-022 - White Paper

Mitigation of Pure Tin Risk by Tin-Lead SMT Reflow - Results of an Industry Round-Robin - Final Report

Document #:
IPC/PERM-WP-022
Revision
Original Version
Product Type
White Paper
Released:  09/05/2018
Language
English
Current Revision
Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin-lead solder. One approach is to fully consume the tin plating by tin-lead solder during the SMT reflow process. This phenomenon of tin...

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。

IPC-WP-019 - Revision A - White Paper

An Overview on the Global Change in Ionic Cleanliness Requirements

Document #:
IPC-WP-019
Revision
A
Product Type
White Paper
Released:  10/12/2018
Language
English
IPC-WP-019A a revised white paper provides an overview of ionic cleanliness requirements, providing examples of tests and requirements for acceptability from a residue/cleanliness standpoint. The history of ROSE testing is also provided, with explanations of the shortcomings of that testing.

IPC-T-50 - Revision H - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
H
Product Type
Standard Only
Released:  09/17/2009
Language
Chinese
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。

IPC-TR-583 - Study/Report

An In-Depth Look At Ionic Cleanliness Testing

Document #:
IPC-TR-583
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/2002
Language
English
Current Revision
This original research was a cooperative effort between the EMPF and IPC, released as EMPF-RR-0013 in 1993 for better understanding of ionic cleanliness testing. The IPC Ionic Conductivity/Ion Chromatography Test Task Group has validated its continued importance and relevance to the cleaning community and IPC-TR-583 is the result. It includes how solvent temperature influences the final...
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC-582 - Study/Report

Cleaning & Cleanliness Test Program for Phase 3-Low Solids Fluxes & Pastes Processed in Ambiant Air

Document #:
IPC-TR-582
Revision
Original Version
Product Type
Study/Technical Report
Released:  10/02/2018
Language
English
Current Revision
This document details the test procedures, test results and team conclusions for the IPC Cleaning and Cleanliness Testing Program, Phase 3, Low Solids Flux in Ambient Air. This effort has been part of a multi-stage program to investigate material and process alternatives to the use of chlorofluorocarbons (CFCs) in electronics manufacturing. This Phase 3 effort has been dedicated to characterizing...
no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Released:  08/04/2020
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...
no-image-available

IPC-D-620 - Standard Only

线缆及线束组件的设计与关键工艺要求

Document #:
IPC-D-620
Revision
Original Version
Product Type
Standard Only
Released:  03/24/2022
Language
Chinese
Current Revision
IPC-D-620 为线缆和线束组件以及军事/航空应用的三个产品类别提供了设计与关键工艺要求。 它是 IPC/WHMA-A-620“线缆及线束组件的要求与验收”及其相关航空附录的设计要求伴侣 包括三份白皮书，为标准中讨论的关键主题提供指导。 这些是： IPC-WP-113, Guidance for the Development and Implementation of a Red Plague Control Plan (RPCP) IPC-WP-114, Guidance for the Development and Implementation of a White Plague Control Plan (WPCP) IPC-WP-116, Guidance for the Development and Implementation of a Foreign Object...
no-image-available

IPC-A-22 - Gerber Files

UL Recognition Test Pattern

Document #:
IPC-A-22
Revision
Original Version
Product Type
Gerber Files
Released:  02/01/1996
Language
English
Current Revision
Recognition vehicle for UL-796 and UL-746. Tests for conductor width plating quality-PTH, flammability, etc. (1 pc. 41 x 57 cm 1:1). Gerber Format.
no-image-available

IPC-9708 - Standard Only

鉴定印制板组件焊盘坑裂的测试方法

Document #:
IPC-9708
Revision
Original Version
Product Type
Standard Only
Released:  07/24/2013
Language
Chinese
Current Revision
简要介绍 （英文） 对SMT组件定期进行机械弯曲和冲击测试，以确保它们能够承受预期的生产、搬运和最终使用条件。在弯曲和冲击测试过程中，加载于SMT组件的应变和应变率在焊点附近会导致各种失效模式。本文件提供了测试方法去评估印制板组装（PBA）材料的敏感性和关于表面贴装技术（SMT）的连接焊盘下方绝缘材料接合失效的设计。这些测试方法，包括引脚拉拔、焊球拉拔、焊球剪切测试，可以对不同的印制板的材料和设计参数进行排序和比较。全文共17页。2010年12月发布。2013年5月翻译。

IPC-9702 - Standard Only

板极互连的单向弯曲特性描述

Document #:
IPC-9702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2004
Language
Chinese
Current Revision
本文件旨在描述元器件板级互连的断裂强度特性，它详细说明了确定板级器件互连对非周期板组装和测试操作过程中可能发生的弯曲载荷的抗断裂力的常用方法。本文件适用于采用常规再流焊接技术连接到印制板上的表面贴装元器件，并补充了有关运输、装卸或现场操作过程中的机械冲击或撞击的现有标准。全文共14页，2004年6月正式发布英文版，2011年6月发布中文版 预览本标准
no-image-available

IPC-9703 - Standard Only

焊点可靠性的机械冲击测试指南

Document #:
IPC-9703
Revision
Original Version
Product Type
Standard Only
Released:  09/19/2019
Language
Chinese
Current Revision
本标准建立了机械跌落和冲击测试指南，用于评估印刷电路板组件从系统到组件级别的焊点可靠性。 本文件介绍了定义机械冲击使用条件的方法，定义系统级别的方法；系统级印刷电路板以及与此类使用条件相关的元器件测试板级别的测试，以及使用实验测量机械冲击测试的指导。 正文42页。 2009年3月英文版发布。2019年3月翻译。
no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...
no-image-available

IPC-WP-019 - Revision B - White Paper

综述全球离子洁净度要求的变更

Document #:
IPC-WP-019
Revision
B
Product Type
White Paper
Released:  04/13/2022
Language
Chinese
Current Revision
本白皮书 IPC WP-019B 旨在支持 J-STD-001 修订版 H，并提供额外的指导、示例和对第 8.0 节清洁和残留物要求的理解。 推荐给那些希望实现 J-STD-001 8.0 要求的人。
1-100 of 115