Search results

IPC-HDBK-620 is a companion reference to IPC-D-620 ‘‘Design and Critical Process Requirements for Cable and Wiring Harnesses’’ and IPC/WHMA-A-620 ‘‘Requirements and Acceptance for Cable and Wire Harness Assemblies” and provides supporting information and technical rationale for requirements in those standards. This guidance document is highly recommended for anyone who wants to learn the “how” and...

Free Review Updated to Revision G of the latest IPC-A-610 industry standard for the Acceptability of Electronic Assemblies, this Training & Reference Guide illustrates critical acceptance criteria for the evaluation of surface mount solder connections. At only 44 pages and a compact 5.5 x 8.5 inch (14 x 21.5 cm) size, these convenient spiral-bound manuals make it easy for your inspectors and...

IPC-1754 WAM 1 Materials and Substances Declaration for Aerospace and Defense and Other Industries establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...

This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.

“IPC J-STD-001JS 宇宙・軍事用途向け追加規格”は、IPC J-STD-001Jの要求事項のうち特定の要件を補完する/置き換えるものであり、宇宙および軍事用途において、輸送時や運用時の振動/熱サイクル環境に耐えることが求められる電気・電子組立品を対象としている。

Die Richtlinie IPC J-STD-001HS-DE Ergänzung für Raumfahrt-Anwendungen ergänzt oder ersetzt spezifisch identifizierte Anforderungen von IPC J-STD-001H-DE für gelötete elektrische und elektronische Baugruppen, die Schwingungen und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischen Anwendungen überstehen müssen.

Lead-free electronics continues to be a concern of the aerospace, defense, and high performance products (ADHP) industries. This is primarily due to the lack of data and knowledge to: thoroughly categorize performance under harsh service conditions and provide a level of confidence in reliability assessments of Pb-free electronics equal to those for traditional tin-lead electronics. To help close...

IPC-WP-028 white paper provides guidance on obtaining objective evidence for validating the acceptability of bubbles in conformal coatings. It focuses on a failure mode where bubbles in coatings could activate a microclimate involving condensation of humidity inside the bubbles resulting in an increase of the local humidity load to a critical level, thus generating electrochemical migration...

This is a three-page list of common terms and definitions use when discussing solder reflow processes and equipment.

This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

IPC J-STD-001JS 航太和軍事補充標準補充或取代了 IPC J-STD-001J 中針對焊接電氣和電子元件的特定要求，這些元件必須能在航太和軍事應用振動與熱迴圈環境下運行。

IPC-2591, CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical...

This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...

IPC-4554, Specification for Immersion Tin Plating for Printed Circuit Boards, is included in the IPC-455X series of specifications that set the requirements for printed board surface finishes that are alternates to non-coplanar finishes, most often referred to as tin-lead HASL finish. This specification is a full-color document that is intended for use by the supplier or printed board fabricator...

This is a seven-page list of electronics cleaning terms and definitions as they relate to printed circuit assembly cleaning.

This is a four-page list of common terms and definitions use when discussing screen printing processes and equipment.

This SMEMA standard is for fiducial marks. It was developed to facilitate the accurate placement of components on printed circuit boards.

IPC-HDBK-840 supplements the solder mask requirements established in IPC specifications such as IPC-SM-840 and IPC-6012 by providing detailed information on solder mask types, application processes, pre- and post- assembly processes, characteristics and properties that are useful in the selection and use of the most appropriate mask type for a given application. Applicable to solder mask...

001H-DE und IPC-A-610H-DE enthält Kriterien zur Sicherstellung der Zuverlässigkeit gelöteter elektrischer und elektronischer Automotive-Baugruppen im Feld unter rauen Umgebungsbedingungen und berücksichtigt die Bedingungen einer automatisierten Großserienproduktion. Die Ergänzung IPC J-STD-001HA-DE/IPC-A-610HA-DE ist kein eigenständiges Dokument. Diese Ergänzung fordert, dass sie in Verbindung mit...

IPC-2591, Version 1.6 establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, Version 1.6 applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly...

The IPC-HERMES-9852 is an open industry standard, developed by the Hermes Standard Initiative and approved by IPC. The IPC-HERMES-9852 provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Specifically, IPC-HERMES-9852, version 1.5 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...

The IPC-4592 standard establishes the classification system, the qualification and quality conformance requirements for functional dielectric materials used in printed electronics applications. The intended applications include but are not limited to dielectric materials as protective dielectric or insulator/insulation layer(s), capacitive layer(s), crossovers and encapsulant(s) for devices in...

This specification sets the requirements for the use of electroless nickel/electroless palladium/immersion gold (ENEPIG) as a surface finish for printed boards. It establishes requirements for ENEPIG deposit thicknesses for applications including soldering, wire bonding and as a contact finish. It is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing...

The IPC-Hermes-9552 v. 1.4 is an open industry standard, developed by The Hermes Initiative and approved by IPC. The IPC-Hermes-9542 provide a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology (SMT). Specifically, IPC-HERMES-9852, version 1.4 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...