Menu
Close
Contact Us

Amendment

Your results

  • 51

Document #

Language

Products

IPC-6012E-AM1 Cover Image

IPC-6012 - Revision E - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  04/20/2022
Language
English
Current Revision
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
no-image-available

IPC-6013 - Revision D - Amendment 1

Qualification and Performance Specification for Flexible and Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Amendment
Released:  05/03/2018
Language
English
Current Revision
IPC-6013D-AM1 is an amendment makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6013D. IPC-6013D-AM1 is an amendment which implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after July 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with...

IPC-J-STD-006 - Revision C - Amendment 1

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
C
Product Type
Amendment
Released:  11/02/2017
Language
English
Current Revision
The J-STD-006C-AM1 amendment provides better detail of a solder alloy's maximum allowed deviation about the nominal level of the element's mass than was provided in past alloy standards. The J-STD-006C-AM1 amendment provides information on negative effects of adding rare earth elements to specific, heavy tin-containing, lead-free solder alloys and propensity of tin whisker formation. Finally, the...
IPC-1755A Am1 Cover Image

IPC-1755 - Revision A - Amendment 1

Responsible Sourcing of Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
A
Product Type
Amendment
Released:  10/27/2021
Language
English
Current Revision
IPC-1755A-Am1 cannot be used without a copy of IPC-1755A the base standard. You can purchase IPC-1755A-Am1 and IPC-1755A in the IPC.org online store. The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers regarding the responsible resourcing of minerals. The IPC-1755 standard originally addressed conflict minerals within the scope of the Dodd...
no-image-available

IPC-4413 - Amendment 1

Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

Document #:
IPC-4413
Revision
Original Version
Product Type
Amendment
Released:  01/29/2026
Language
English
Current Revision
IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.
no-image-available

IPC-4554 - Amendment 1

Specification for Immersion Tin Plating for Printed Circuit Boards

Document #:
IPC-4554
Revision
Original Version
Product Type
Amendment
Released:  09/01/2013
Language
English
Current Revision
IPC-4554, "Specification for Immersion Tin Plating for Printed Circuit Boards," is the third document in a series of specifications [the first two are: IPC-4552 which addresses electroless nickel/immersion gold (ENIG) and IPC-4553 which addresses immersion silver (IAg)] that set the requirements for printed circuit board surface finishes that are alternates to eutectic tin-lead. IPC-4554, a full...
no-image-available

IPC-4821 - Amendment 1

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Amendment
Released:  05/01/2006
Language
English
Current Revision
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
no-image-available

IPC-1754 - Amendment 2

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Amendment
Released:  06/23/2020
Language
English
Current Revision
IPC-1754-Am2, establishes the requirements for the exchanging material and substance data for Products between suppliers and their customers and has been developed through the participation of aerospace, defense, automotive, electronics and solution provider representatives.
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/01/2015
Language
English
This is an amendment to IPC J-STD-001F, a recognized industry-consensus standard covering materials and processes. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements and BGA voiding criteria, new graphics for several surface mount component types, revised staking criteria, and recognition of the paragraphs addressed in J-STD-001FS, Space...
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  12/14/2015
Language
English
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC/WHMA-A-620 - Revision B - Amendment 1

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Amendment
Released:  08/01/2013
Language
English
This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B. When there are changes to a...
no-image-available

IPC-4412 - Revision B - Amendment 1

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  04/01/2014
Language
English
Specification for Finished Fabric Woven from "E" Glass for Printed Boards The Amendment 1 to IPC-4412B adds a new glass yarn [either SI identification => (4 1.32 1X0) or US identification => (BC 3750 1/0)] and a new light weight weave style => (1010) to the standard
no-image-available

IPC-4412 - Revision B - Amendment 2

Specification for finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  05/18/2018
Language
English
IPC-4421B-AM2 an amendment includes two extensive tables of finished fabric glass styles, one in SI (metric) units and the other in U.S. (English) units. IPC-4412B standard exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E"...

IPC-4103 - Revision A - Amendment 1

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
A
Product Type
Amendment
Released:  01/01/2014
Language
English
Specification for Base Materials for High Speed/High Frequency Applications Amendment 1 generates a formalized record, for document control purposes, of corrections to ten separate sections in the main body of the standard; to the first 16 "legacy" specification sheets (IPC-4103/1 through IPC-4103/16); and to the 10 "new format" specification sheets for bonding layer materials (IPC-4103/500...
no-image-available

IPC-4202 - Amendment 2

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 2 to IPC-4202A modifies the standard by changing only one requirement in property 9. ‘Propogation Tear Strength, minimum’ for a base dielectric thickness that ranges from ≤ 50 µm to < 102 µm; changing the propogation tear strength to 13.5 grams [0.476 ounces].
no-image-available

IPC-4203 - Revision A - Amendment 1

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
A
Product Type
Amendment
Released:  10/01/2014
Language
English
Amendment 1 modifies the standard by adding a new IPC-4203/25 Specification Sheet. Also, Table 1-5 Adhesive Type Designation has a new designation added: “V [Polyamide-imide]” and finally, the appropriate header information from /25 specification sheet is added to a section in the main body of the standard titled: Specification Sheets for Adhesive Coated Dielectric Films or Adhesive Bonding Films.
no-image-available

IPC-4202 - Revision A - Amendment 1

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 1 to IPC-4202A modifies the standard by correcting editorial errors; converts metric dimensional units of measure to those commonly used throughout industry; describes the flammability method of test and requirements for very thin materials (VTM); and corrects property requirement errors in all nine specification sheets contained in this standard.
no-image-available

IPC-J-STD-006 - Revision B - Amendments 1 & 2

Requirements for Electronic Grade Solder alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
B
Product Type
Amendment
Released:  09/01/2009
Language
English
Amendments 1 & 2 to IPC J-STD-006B make the following nine changes to the basic document: 1. Correct some editorial mistakes in the document's text, 2. Add reference to IPC/JEDEC J-STD-609, Lead-Free and Leaded Marking, Symbols and Labels, 3. Clarify the meaning of those alloys that are designated as lead-free, 4. Provide guidance to suppliers how to designate and mark lead-free alloys, 5. Correct...
no-image-available

IPC-J-STD-004 - Revision B - Amendment 1

Requirements for Soldering Fluxes

Document #:
IPC-J-STD-004
Revision
B
Product Type
Amendment
Released:  11/01/2011
Language
English
Amendment 1 to the J-STD-004B corrects editorial mistakes throughout the document and addresses Halogen-free and Halide-free terminology and requirements in fluxes.
no-image-available

IPC-4204 - Revision A - Amendment 1

Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry

Document #:
IPC-4204
Revision
A
Product Type
Amendment
Released:  10/01/2013
Language
English
Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry Amendment 1 to IPC-4204A modifies the standard by replacing five sections in the document (sections: 1.1.2 Specific Designation; 2.1 IPC; 2.5 ISO; 3.5.2 Wrinkles, Creases, Streaks and Scratches; and 3.9 Electrical Requirements) to clarify the meanings of these sections.
no-image-available

IPC-4562 - Revision A - Amendment 1

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
A
Product Type
Amendment
Released:  02/01/2013
Language
English
Amendment 1 to IPC-4562A re-inserts the specification sheet IPC-4562/6 (CU-W6) back into the IPC-4562A document that was previously removed when the standard was revised to it's a revision from its original release in April 2008. Also included in this Amendment 1 are all references to the IPC-4562/6 (CU-W6) in section 1.2.4.1, the Table A1, the summary of all specification sheets as well as the...

IPC-6012 - Revision E - Amendment 1

刚性印制板的鉴定及性能规范- 修订本1

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  10/28/2022
Language
Chinese
Current Revision
IPC-6012E-AM1是IPC-6012E的修订本，澄清了再流焊SnPb或HASL镀层中退润湿和焊料回缩之间的区别。 该修订本还为成品印制板的最小外部导体厚度提供了修订标准，并为内部电镀层的最小厚度提供了新的接受标准。
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Cerințe pentru Ansamblurile Electrice și Electronice Lipite

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/28/2016
Language
Romanian
Current Revision
Acesta este un amendament la standardul IPC J-STD-001F, un standard industrial recunoscut și adoptat, acoperind cerințe de materiale și procese. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire, reprezentări grafice noi pentru montarea...
no-image-available

IPC-6012 - Revision D - Amendment 1

Sert Baskı Devre Kartları İçin Kalifikasyon ve Performans Spesifikasyonu

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  01/25/2019
Language
Turkish
Current Revision
Bu döküman; kaplı delikiçine sahip olan veya olmayan tek yüzlü, çift yüzlü baskı devre kartları ve kör/gömülü geçiş deliklerine sahip olan veya olmayan çok katmanlı baskı devre kartları ile metal çekirdekli kartları içeren sert baskı devre kartlarının kalifikasyonunu ve performansını kapsamaktadır. Son kaplama ve yüzey kaplama gereklilikleri, iletkenler, delikler/geçiş delikleri, kabul testlerinin...
no-image-available

IPC-4552 - Amendment 1

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  06/12/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 1 to IPC-4552 replaces the Table 3-1 Requirements of Electroless Nickel Immersion Gold Plating plus also replaces all of sections 3.2.1 Immersion Nickel Thickness and 3.2.2 Immersion Gold Thickness in the original release of the IPC-4552. The Amendment 1 permits the use of thinner gold (≥4 µm...
no-image-available

IPC-4552 - Amendment 2

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  09/01/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 2 to IPC-4552 is a new section in the original release of the IPC-4552. The Amendment 2 provides the “rules” by which any rework and/or repair of a printed board's ENIG surface finish is allowed. Effective September 2012.
no-image-available

IPC-4556 - Amendment 1

Specification for Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Plating for Printed Circuit Boards

Document #:
IPC-4556
Revision
Original Version
Product Type
Amendment
Released:  01/01/2016
Language
English
The Amendment 1 to IPC-4556 made the following changes to the base specification: a) It added the absolute value of the maximum thickness for the immersion gold of 0.070 μm [2.8 μin] that accompanies the statistically valid minimum immersion gold thickness; b) It added two more photomicrograph images to provide better information on identifying nickel hyper corrosion; c) It added the basis of...

IPC-9121 - Amendment 2

Troubleshooting for Printed Board Fabrication Processes

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  09/01/2019
Language
English
The amendment 2 to IPC-9121 provides new troubleshooting topics on hole quality, laser drilling, microvias, drill smear, electroless nickel, organic solderability preservative (OSP) and rigid-flex boards.

IPC-9121 - Amendment 1

Troubleshooting for PCB Fabrication Processes

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  04/02/2018
Language
English
IPC-9121 AM1 is an amendment to IPC-9121 which provides updates to the Hole Preparation/Protection and Interconnect Formation sections, covering troubleshooting topics and guidance on nonconductive plugging paste, microvias and pattern plating rim voids. IPC-9121 AM1 also includes a new section on Flexible Circuits.
no-image-available

IPC-4103 - Amendment 2

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
Original Version
Product Type
Amendment
Released:  11/01/2015
Language
English
The Amendment 2 to IPC-4103A-WAM1 made four fundamental changes to the base standard: All references to the epoxy curative of DICY (dicyandiamide) were removed; Opaque foreign inclusions were more specifically defined and limited; The optional properties of thermal conductivity for both laminates and bonding layers were added; and The dielectric constant (permittivity) ranges were specifically...
no-image-available

IPC-9121 - Amendment 1

印制板制造工艺问题解答 修订本1

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  10/08/2020
Language
Chinese
Current Revision
本手册可供任何生产制造或采购印制板的人员作为基本资源。数百张真实的全彩色照片聚焦了650多个印刷电路板工艺缺陷，每个缺陷都有其分析原因和纠正措施。IPC-9121是取代1997年12月发布 的IPC-PE-740A中的PCB部分。2016年3月发布9121英文母标准，2018年年4月发布修订本1，修订本1于2020年4月翻译。详情参见目录。
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Exigences des Assemblages Électriques et Électroniques Brasés

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  06/22/2017
Language
French
Ceci est un amendement de l’IPC J-STD-001F, une norme reconnue selon un consensus industriel décrivant les matériaux et les procédés. Les changements incluent, mais ne sont pas limités à, une révision des exigences de remplissage minimum des trous métallisés, des critères de vide pour les BGA, de nouveaux dessins pour plusieurs types de composants montés en surface, des critères de collage révisés...
no-image-available

IPC-J-STD-001 - Revision G - Amendment 1

Provee requisitos para materiales de soldadura y procesos para ensambles

Document #:
IPC-J-STD-001
Revision
G
Product Type
Amendment
Released:  03/13/2019
Language
Spanish
El documento IPC J-STD-001D-Am 1 proporciona la primera revisión importante a la que se han sometido los requisitos de limpieza de la norma J-STD-001 desde hace más de 25 años y con la que se cambia el modo en el que la industria abordará los requisitos relativos a limpieza y residuos. Entre los puntos destacados de esta enmienda se encuentra un requisito para fabricantes de productos de clase 2 y...
no-image-available

IPC-J-STD-001 - Revision G - Amendment 1

Les exigences relatives au brasage d’assemblages électroniques et électriques.

Document #:
IPC-J-STD-001
Revision
G
Product Type
Amendment
Released:  03/13/2019
Language
French
IPC J-STD-001D-Am 1 constitue la première révision majeure des exigences de propreté de la norme J-STD-001 depuis plus de 25 ans et modifie la façon dont l’industrie doit répondre aux exigences de nettoyage et de résidus. Les points forts de cette modification incluent, sauf spécification contraire de l’utilisateur, l’obligation pour les fabricants de produits des Classes 2 et 3 de se soumettre à...
no-image-available

IPC-A-610 - Revision F - Amendment 1

电子组件的可接受性 修订本1

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  11/17/2016
Language
Chinese
该文件是IPC-A-610F的修订本，是电子组装可接受性要求的公认行业标准。变化包括，但不仅限于：镀通孔、最小填充要求、有非塌落焊料球的球栅阵列空洞标准和加固标准。
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptabilitatea Ansamblurilor Electronice Amendament 1

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  11/28/2016
Language
Romanian
Acesta este un amendament la standardul IPC-A-610F, un standard industrial recunoscut și adoptat, acoperind cerințe de acceptabilitate ale ansamblurilor electronice. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire și cerințe noi pentru...
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptabilité des Assemblages Électroniques

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  06/22/2017
Language
French
Ceci est un amendement à l’IPC-A-610-F, une norme reconnue selon un consensus industriel décrivant les exigences d’acceptabilité des assemblages électroniques. Les changements incluent, mais ne sont pas limités à, une révision des exigences de remplissage minimum des trous métallisés, des critères de vide pour les BGA à billes non affaissables et des critères de collage. Publiée en Décembre 2015
no-image-available

IPC-6012 - Revision D - Amendment 1

リジッドプリント板の認定および性能仕様-改定1

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  03/19/2019
Language
Japanese
本改訂は、IPC-6012Dで定められた銅ラップめっきの測定に関し、既存の許容基準に対し変更を加えるものである。本改訂は、新規設計品に施行される受け入れ要件の導入に伴い、旧来の設計品に追加的な品質認定作業を課すことのないよう、設計の有効日(2018年1月1日の前日まで、また、2018年1月1日以降)を基準に、クラス3製品の銅ラップめっきに二重基準を施行するものである。IPC-6012Dに記載する「銅ラップめっきの要求事項」の対象となる旧来の製品に対しては、本改訂は適用されない。8ページ。2019年1月翻訳。
1-50 of 51

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards