Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...
no-image-available

IPC-J-STD-048 - Revision A - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
A
Product Type
Standard Only
Released:  01/22/2026
Language
English
Current Revision
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

IPC-2581 - Revision C - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
C
Product Type
Standard Only
Released:  11/20/2020
Language
English
Current Revision
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...
no-image-available

IPC-HERMES-9852 - Version 1.6 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.6
Product Type
Standard Only
Released:  08/28/2024
Language
English
Current Revision
The IPC-Hermes-9852 standard provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Used with IPC-2591, Connected Factory Exchange, IPC-HERMES-9852 can assist any electronics manufacturer, large or small, to align their companies with smart manufacturing and Industry 4.0. Version 1.6 includes updates to SendBoardInfo and capabilities...
no-image-available

IPC-2591 - Version 2.0 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
2.0
Product Type
Standard Only
Released:  03/10/2025
Language
English
Current Revision
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...
no-image-available

IPC-9271 - Standard Only

Guidelines for In System Programming

Document #:
IPC-9271
Revision
Original Version
Product Type
Standard Only
Released:  09/30/2025
Language
English
Current Revision
The IPC-9271 standard provides guidelines for device-level In-System Programming (ISP) as part of electronics assembly process. The standard addresses PCB design for ISP, fundamental characteristics when selecting an ISP programmer and the integration of the programmer in the production environment, including: fixtures, software, mechanical and process integration methodologies to increase...
no-image-available

IPC-2591 - Version 1.7 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.7
Product Type
Standard Only
Released:  08/24/2023
Language
English
Current Revision
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
no-image-available

IPC-2501 - Standard Only

Definition for Web-Based Exchange of XML Data

Document #:
IPC-2501
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC-9716 - Standard Only

自動光学検査(AOI)を用いたプリント基板の工程管理に関する要求事項

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  06/27/2025
Language
Japanese
Current Revision
本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。
no-image-available

IPC-HERMES-9852 - Version 1.6 - Standard Only

表面贴装技术组装中机器对机器通信的全球标准

Document #:
IPC/HERMES-9852
Revision
1.6
Product Type
Standard Only
Released:  01/29/2026
Language
Chinese
Current Revision
IPC-Hermes-9852 标准为表面贴装技术提供了一种先进的机器对机器通信协议。与 IPC-2591（互联工厂数据交换协议）配合使用，可以帮助任何规模的电子产品制造商实现智能制造和工业 4.0 转型。1.6 版本更新了 SendBoardInfo，并增加了对支持 HERMES 的设备进行 HERMES 功能查询的功能。
no-image-available

IPC-2591 - Version 2.0 - Standard Only

互联工厂数据交换(CFX)

Document #:
IPC-2591
Revision
2.0
Product Type
Standard Only
Released:  10/14/2025
Language
Chinese
Current Revision
本标准规定了电子装配制造领域中制造过程与相关主机系统之间进行全向数据交换的要求。 本标准适用于印制板组件制造中所有可执行流程（包括自动化、半自动化以及手动流程）之间的通信，同时也适用于相关的机械装配与其他事务处理流程
no-image-available

IPC/DAC-2552 -Standard Only

通用电子元器件基于模型的定义

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  10/25/2024
Language
Chinese
Current Revision
本标准是由IPC与广东省数字化学会（DAC）联合开发和发布的国际标准，目的旨在解决业内各厂家提供的电子元器件几何模型及语义信息参差不齐，导致使用方需要重复建模处理且无法复用等问题。 定义如何将电子元器件的设计、仿真、制造等领域的属性关联到电子元器件的三维模型及对应的子部件上的数字化建模，通过规范各供应商按模型交付，工具间（CAD/CAE等）数据集成打通的方式，可实现高效
no-image-available

IPC-2591 - Version 1.3 - Standard Only

互联工厂数据交换 (CFX)

Document #:
IPC-2591
Revision
1.3
Product Type
Standard Only
Released:  09/21/2021
Language
Chinese
Current Revision
该标准建立了制造过程和装配制造相关主机系统之间全方位信息交换的要求。 本标准适用于印制板组件制造中所有可执行过程之间的通信，自动、半自动和手动，适用于相关的机械装配和交易过程。 IPC-2591 版本 1.3 提供了多个 IPC-CFX 消息的更新以及按设备类型划分的强制性和可选 IPC-CFX 消息。 请访问 www.ipc-cfx.org，获取有关 IPC-CFX 实施的设备验证系统的软件开发人员资源和信息。
no-image-available

IPC-2591 - Standard Only

Connected Factory Exchange (CFX)-JP

Document #:
IPC-2591
Revision
Original Version
Product Type
Standard Only
Released:  09/27/2019
Language
Japanese
Current Revision
本標準は、製造工程とそれに関連する組立品製造用のホストシステム間との全方向的な情報交換に関する要件を規定している。 本標準は、自動化、半自動化、および手動によるプリント基板組立品製造 におけるすべての実行可能な工程間の通信に適用され、関連する機械的組立ておよびトランザクション処理にも適用可能である。 2019年8月翻訳
no-image-available

IPC-HERMES-9852 - Standard Only

表面贴装技术组装中机器对机器通信的全球标准

Document #:
IPC/HERMES-9852
Revision
Original Version
Product Type
Standard Only
Released:  01/20/2020
Language
Chinese
Current Revision
这个开放的行业标准是由Hermes标准倡议小组开发并获得IPC批准的国际标准，它为用于表面贴装技术（SMT）的机器对机器通信提供了最新的通信协议。 具体来说，IPC-HERMES-9852版本1.2提供了从标准版本1.1开始的电气SMEMA接口替代，并扩展了该接口以传达诸如已处理印制板的唯一标识符，通知印制板的第一台机器的设备标识符，条形码之类的信息，传送带速度以及有关产品类型的特定信息。 IPC-HERMES-9852与IPC-2591，互联工厂交互一起使用，可以帮助任何规模的电子制造商将其公司与智能制造和工业4.0相结合。

IPC-2591 - Standard Only

Datenaustausch in der vernetzten Fabrik (CFX)

Document #:
IPC-2591
Revision
Original Version
Product Type
Standard Only
Released:  07/11/2019
Language
German
Current Revision
Diese Richtlinie legt die Anforderungen für den omnidirektionalen Informationsaustausch zwischen Fertigungsprozessen und zugehörigen Leitsystemen für die Baugruppenmontage fest. Diese Richtlinie gilt für die Kommunikation zwischen allen ausführbaren Prozessen bei der Herstellung von Leiterplatten-Baugruppen (automatisiert, halbautomatisiert und manuell) und gilt für die zugehörigen mechanischen...

IPC-2591 - Standard Only

Échanges au sein d’une usine connectée (CFX)

Document #:
IPC-2591
Revision
Original Version
Product Type
Standard Only
Released:  09/25/2019
Language
French
Current Revision
La présente norme établit les exigences relatives à l’échange omnidirectionnel d’informations entre les procédés de fabrication et les systèmes hôtes associés dans la fabrication des assemblages. Cette norme s’applique à la communication entre tous les procédés exécutables présents dans la fabrication d’assemblages de circuits imprimés, automatisés, semi-automatisés et manuels, et aux procédés d...
no-image-available

IPC-1782 - Standard Only

电子产品的制造和供应链可追溯性标准

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  04/12/2019
Language
Chinese
Current Revision
缺乏统一的元器件可追溯性标准已经导致不必要的资源消耗（例如时间、人力、金钱等）来跟踪事件或部件的来源，并补救相关质量、可靠性等问题。标准缺失也导致难以一致地创建和适当地执行必要的合同。 本标准建立了制造商和供应链可追溯性的最低要求，此要求是基于供需双方协商确定（AABUS）的感知风险。本标准适用于所有产品，制程，组件，部件，元器件，所使用的设备以及由供需双方在印制电路板组件制造以及机械组装中定义的其他项目。
1-24 of 24

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards