Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-7095 - Revision D - Standard with Amendment 1

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  07/09/2019
Language
English
Current Revision
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...
no-image-available

IPC-7530 - Revision B - Standard Only

Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow and Wave)

Document #:
IPC-7530
Revision
B
Product Type
Standard Only
Released:  03/13/2025
Language
English
Current Revision
This document provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies using reflow, vapor phase, laser, selective and wave soldering equipment. The document also includes a troubleshooting guide for addressing common defects which can be attributed to profiling.

IPC-7093 - Revision A - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components (BTCs)

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  11/30/2020
Language
English
Current Revision
The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.
IPC-7091A Cover Image

IPC-7091A - Revision A - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

IPC-7094 - Revision A - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die-Size Components

Document #:
IPC-7094
Revision
A
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-T-50 - Revision P - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
P
Product Type
Standard Only
Released:  11/25/2025
Language
English
Current Revision
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

IPC-A-630 - Standard Only

Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

Document #:
IPC-A-630
Revision
Original Version
Product Type
Standard Only
Released:  10/04/2013
Language
English
Current Revision
This standard is the first of its kind for IPC; the first acceptability standard for electronic enclosures. It contains acceptability criteria that pertain to the "box build" of the assembly process. This standard has been written to direct manufacturers and end users of electronic enclosures of electrical and electronic equipment to understand the best practices to meet requirements, ensuring the...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...

ECA/IPC/JEDEC-J-STD-075 - Standard Only

Classification of Non-IC Electronic Components for Assembly Processes

Document #:
ECA/IPC/JEDEC-J-STD-075
Revision
Original Version
Product Type
Standard Only
Released:  09/03/2008
Language
English
Current Revision
J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

ボールグリッドアレイ(BGA)の設計および組立プロセスの実施 – 改訂版1

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  06/17/2020
Language
Japanese
Current Revision
IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

BGA设计与组装工艺的实施

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  09/19/2019
Language
Chinese
Current Revision
IPC-7095D在设计，组装，检查和维修过程中实施球栅阵列（BGA）和细节距球栅阵列（FBGA）技术提出了了一些独特的挑战。它为使用或正在考虑使用BGA的用户提供有用和实用的信息。 它还介绍了如何使用BGA成功实现印刷电路板组件的稳健设计和装配流程，以及解决BGA组装过程中可能出现的一些常见异常的方法。由于焊球中合金，焊球形状，封装程序等的改变，许多问题变得尤为重要。D版主要重点是为组装后出现的一些新的机械失效问题如坑裂或层压缺陷提供信息。除了提供BGA检查和维修的指引外，本标准还解决了与BGA相关的可靠性问题和无铅焊点的使用标准。该标准中有许多X射线和内窥镜的照片和插图以确认行业中BGA组装工艺的实施中的遇到的一些情况。
no-image-available

IPC-7530 - Revision B - Standard Only

量産はんだ付プロセス(リフローおよびウェーブ)のための温度プロファイルガイドライン

Document #:
IPC-7530
Revision
B
Product Type
Standard Only
Released:  12/17/2025
Language
Japanese
Current Revision
本書は、リフロー、ベーパーフェーズ(気相)、レーザー、セレクティブ、ウェーブの各ソルダリング装置を使用し、許容可能な電子組立品(SnPb及びPbフリー)を生産する上で必要となる熱プロファイルの作成において、有用かつ実用的な情報を提供するものである。本書には、プロファイル測定に起因する一般的な欠陥に対処するためのトラブルシューティングガイドも含まれている
no-image-available

IPC-7093 - Revision A - Standard Only

底部端子元器件(BTCs)设计和组装工艺的实施

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  09/14/2022
Language
Chinese
Current Revision
IPC-7093A 标准为实施底部端子元器件(BTCs)提供了基本的设计和组装指南。具体而言，IPC-7093A 提供了与 BTCs 相关的关键设计、材料、组装、检查、维修、质量和可靠性问题的指南。
no-image-available

IPC-7091 - Revision A - Standard Only

3D(三次元)部品の設計および組立プロセスの実施

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  11/04/2024
Language
Japanese
Current Revision
本書では、3D部品の技術を実施する際の設計/組立の課題や、課題への対処方法について述べる。ケースに収納されていない複数の半導体ダイ素子を単一パッケージのフォーマットに組み合わせる効果を考える場合、その影響は個々の部品特性にも、これまでの組立手法にも及ぶ。本規格に含まれる情報は、3D半導体パッケージの組立とプロセスに関連する最適な機能性、工程評価、最終製品の信頼性とリペアの諸問題の解決に向け焦点を当てたものである。
no-image-available

IPC-7093 - Revision A - Standard Only

下面電極部品(BTC)の設計および組立プロセスの実施

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  05/03/2022
Language
Japanese
Current Revision
本規格「IPC-7093A」は、下面電極部品(BTC)を実装するための基本的な設計および組立のガイダンスについて記述するものである。IPC-7093Aでは特にBTCに関連する重要な設計、材料、組立、検査、リペア、品質および信頼性の問題について、そのガイドラインを提供している
no-image-available

IPC-7530 - Revision A - Standard Only

群焊工艺温度曲线指南（再流焊和波峰焊

Document #:
IPC-7530
Revision
A
Product Type
Standard Only
Released:  05/29/2019
Language
Chinese
Current Revision
本标准的目的是为开发温度曲线提供有效和实用的信息，以生产可接受的锡铅和无铅的电子组件。该修订版将原来标准的重点从再流温度曲线扩展到包括激光焊曲线、选择焊曲线、波峰焊曲线或其他焊接曲线。该修订版还包括一个全彩色故障排除指南，用于解决可归因于分析的常见缺陷。
no-image-available

IPC-9716 - Standard Only

自動光学検査(AOI)を用いたプリント基板の工程管理に関する要求事項

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  06/27/2025
Language
Japanese
Current Revision
本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...

IPC-7092 - Standard Only

埋入式元器件涉及和组装工艺的实施

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  01/20/2020
Language
Chinese
Current Revision
本标准描述了在印制板中以成形或放置方式实现的有源和无源元器件在设计和组装方面的挑战。包括内部电子元器件的完整结构可用于表面贴装和／或通孔元器件连接。在组装过程中，多层结构变成准备为进一步加工的完整产品，它可由有机、无机（陶瓷）或两类兼有的材料制成。

ECA/IPC/JEDEC-J-STD-075 - Standard Only

Clasificación de componentes electrónicos no-IC para procesos de ensamble

Document #:
ECA/IPC/JEDEC-J-STD-075
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
Spanish
Current Revision
El J-STD-075 continúa donde es J-STD-020 termina proporcionando los métodos de pruebas para clasificar las limitaciones de los procesos térmicos en los peores casos para los componentes electrónicos. Las clasificación hace referencia a los perfiles de soldadura para procesos industriales comunes de ola y de reflujo incluyendo procesos libres de plomo. La clasificación representa los máximos...

IPC-SM-785 - Standard Only

表面贴装焊接连接加速可靠性测试指南

Document #:
IPC-SM-785
Revision
Original Version
Product Type
Standard Only
Released:  03/10/2017
Language
Chinese
Current Revision
描述 中文描述 表面贴装焊接连接加速可靠性测试指南评估和预测电子组件在实际使用环境下的测试结果。1992年11月发布。2016年5月翻译.
1-25 of 30

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards