Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.
Products
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 Telecom Addendum Published August 2009. Download the Telecom Addendum. When specifically required by procurement documentation, this Addendum...
This standard identifies the moisture sensitivity classification level of passive surface mount devices and through-hole components, subjected to reflow soldering, so that they can be properly packaged, stored, and handled to avoid subsequent thermal/mechanical damage during assembly solder reflow attachment and/or repair operation. This standard may be used to determine what classification level...
Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...
Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...
This document standardizes the performance parameters for air moving devices. The phrase "air moving device" (or "air mover") refers to equipment such as, fans, blowers and other forced air movement technologies. These air moving devices are used in the electronics industry for the cooling of heat-producing components, and range from small devices mounted directly to hot components such as...
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...
The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...
This publication is intended to characterize the frature strength of a component's board level-interconnect by providing a common method of establishing the fracture resistance to flexural loading that may occur during conventional non-cyclic board assembly and test operations. The document is applicable to surface mount components attached to printed wiring boards using conventional solder reflow...
The purpose of this specification is to define standard practices for handling various kinds of optical fiber and to define the specifications and guidelines to be used in the design of carriers for these fibers in component manufacturing. This document is identified in the overarching IPC-0040, Optoelectronic Assembly and Packaging Technology. This standard does not define a particular carrier...
IPC-8701 presents acceptance guidelines for the solar panel in final module assembly. The intent of this standard is to cover crystalline solar modules.Some of the content may be applicable to other photovoltaic modules such as thin film. The standard reviews and includes acceptance guidelines for incoming and finished frames, frame assembly, sealant, tape, junction box assembly, and bus bar...
This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.
The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...
Originally developed for J-STD-001B, it is also applicable to current assembly standards. Electronics manufacturers are faced with the difficult task of proving that a candidate manufacturing process can produce acceptable hardware, either to the customer of the product, or for internal quality control. Users have to determine many of the process qualification steps on their own. This document...
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
This document describes a PWB fabrication data quality rating system used by fabricators to evaluate incoming data package integrity. Includes information on conformance to both fabricator and customer design rules and can be used by printed board designers as an output quality check. 16 pages. Released February 1999.
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.
IPC-A-600K-DE ist das ultimative, illustrierte Handbuch für Annahmekriterien von Leiterplatten! Diese Richtlinie im Vierfarb-Druck enthält Bilder und Illustrationen der Zustände „Anzustreben“, „Zulässig“ und „Fehler“, die an unbestückten Leiterplatten im Innern oder auf der Oberfläche beobachtbar sind. Stellen Sie sicher, dass Ihre Mitarbeiter, Prüfer und Ingenieure über die aktuellste Version...
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...
LʼIPC-A-600K est le guide illustré de référence sur lʼacceptabilité des circuits imprimés ! LʼIPC-A-600K est un document en quatre couleurs fournissant des photographies et des illustrations de la cible, des conditions « objectif », acceptables et non conformes qui sont observables en interne ou en externe sur des circuits imprimés nus. Veillez à ce que vos opérateurs, inspecteurs et ingénieurs...
The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards