Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-7351 - Standard Only

Generic Requirements for Surface Mount Design and Land Pattern Standard

Document #:
IPC-7351
Revision
Original Version
Product Type
Standard Only
Released:  02/01/2005
Language
English
The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SSOPs, TSSOPs, QFPs, BGAs, QFNs and SONs. The standard provides many brand new features, including an intelligent land pattern naming convention, zero component rotations for CAD systems, and a set of three separate land pattern...
no-image-available

IPC-7092 - Standard Only

Design and Assembly Process Implementation for Embedded Components

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  02/18/2015
Language
English
This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...

IPC-2591 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
Original Version
Product Type
Standard Only
Released:  04/11/2019
Language
English
IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. The IPC-2591 standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...

IPC-2591 - Version 1.1 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.1
Product Type
Standard Only
Released:  01/20/2020
Language
English
IPC-2591 version 1.1 provides updates to several CFX messages since the original IPC-2591 version release. IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 standard applies to communication between all executable processes in the manufacture of printed...

IPC-1072 - Standard Only

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Standard Only
Released:  02/10/2016
Language
English
The purpose of this standard is to provide requirements and best practices for EMS companies to ensure protection of intellectual property for their customers. By using this standard, EMS companies can provide their customers assurance that the intellectual property built into their circuit boards is protected. The document is also a companion to IPC-1071 for printed circuit board manufacturers...

IPC-2231 - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
Original Version
Product Type
Standard Only
Released:  05/14/2019
Language
English
The IPC-2231 standard provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed board assemblies that utilize surface mount and through hole devices.

IPC-1791 - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
English
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

IPC-1782 - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  11/01/2016
Language
English
The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...

IPC-1401 - Standard Only

Supply Chain Social Responsibility Management System Guidance

Document #:
IPC-1401
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2017
Language
English
This standard helps companies achieve intended outcomes of a supply chain social responsibility management system, creating value for the company, its customers, its suppliers and other stakeholders. Users of this standard can expect the following outcomes: Enhancement of working conditions, environmental performance and ethics level of the supply chain Fulfillment of compliance obligations and...

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

航天及军事应用电子部件补充标准

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  01/27/2025
Language
Chinese
Current Revision
IPC/WHMA-A-620ES航天和军事应用电子部件补充标准为IPC/WHMA-A-620E标准提供了额外要求，以确保线缆及线束组件的可靠性，必须能够耐受在军事或太空环境中运行或遇到的振动与超温。IPC/WHMA-A-620ES不能作为一个独立的文件使用。它必须与母标准IPC/WHMA-A-620E搭配使用。IPC/WHMA-A-620ES-CN于2025年2月发布。
no-image-available

IPC-A-610 - Revision G - Addendum - Telecom

IPC-A-610G 电信补充标准

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  01/15/2021
Language
Chinese
Current Revision
当采购文件特别要求对电子产品IPC-A-610G可接受性的IPC-A-610GC电信附录时，对电信产品提出了特定要求。本文档中的信息通过提供其他要求来确保电气和电子组件满足要求符合GE-78-CORE的客户的要求，从而补充或替代了IPC-A-610修订版G专门确定的要求

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。
no-image-available

IPC/WHMA-A-620 - Revision C - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Redline Standard
Released:  03/31/2017
Language
English
This is a redline document showing the changes from IPC/WHMA-A-620B to IPC/WHMA-A-620C. This document provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows the deleted/changed text in the IPC/WHMA-A-620B pages and the new/revised text in purple highlights in the IPC/WHMA-A-620C pages. Yellow pop-up boxes are also present in the IPC/WHMA-A...
no-image-available

IPC-7711/21 - Revision C - Redline Standard

Rework, Modification and Repair of Electronic Assemblies - Redline

Document #:
IPC-7711/21
Revision
C
Product Type
Redline Standard
Released:  05/30/2017
Language
English
This is a redline document showing the changes from IPC-7711/21B to IPC-7711/21C. This 790+ page document provides a side-by-side comparison of the two documents and includes the figures. The document shows the deleted/changed text in the IPC-7711/21B pages and the new/revised text in purple highlights in the IPC-7711/21C pages. Yellow pop-up boxes are also present in the IPC-7711/21C pages to...
610H German Deutch Cover Image

IPC-A-610 - Revision H - Standard Only

Abnahmekriterien für elektronische Baugruppen

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  08/10/2021
Language
German
IPC-A-610H ist die in der Elektronik-Branche weltweit am meisten verwendete Abnahme-Richtlinie für Elektronikbaugruppen. Die IPC-A-610H-Richtlinie beinhaltet eine allgemeine Aktualisierung des Dokuments, führt mehrere neue oberflächenmontierbare Bauteiltypen ein und entfernt die Kategorie „Anzustreben“ bei den Bewertungen. Teilnehmer aus 29 Ländern haben ihre Beiträge und ihr Fachwissen...
IPC-A-610H French Cover Image

IPC-A-610 - Revision H - Standard Only

Acceptabilité des Assemblages Électroniques

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  08/11/2021
Language
French
L’IPC-A-610H est le référentiel d’acceptabilité des assemblages électroniques la plus couramment utilisée dans l’industrie électronique. Le référentiel IPC-A-610H comprend une mise à jour générale du document, présente plusieurs nouveaux types de composants montés en surface et supprime les conditions d’objectif. Les participants de 29 pays ont apporté leur contribution et leur expertise pour...
no-image-available

IPC-4552 - Amendment 1

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  06/12/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 1 to IPC-4552 replaces the Table 3-1 Requirements of Electroless Nickel Immersion Gold Plating plus also replaces all of sections 3.2.1 Immersion Nickel Thickness and 3.2.2 Immersion Gold Thickness in the original release of the IPC-4552. The Amendment 1 permits the use of thinner gold (≥4 µm...
no-image-available

IPC-4552 - Amendment 2

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  09/01/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 2 to IPC-4552 is a new section in the original release of the IPC-4552. The Amendment 2 provides the “rules” by which any rework and/or repair of a printed board's ENIG surface finish is allowed. Effective September 2012.
IPC-A-610H Hebrew Cover Image

IPC-A-610 - Revision H - Standard Only

במקרה של חילוקי דעות בין התרגום במסמך זה לבין הגירסה האנגלית, תינתן עדיפות לגירסה האנגלית.

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  08/04/2022
Language
Hebrew
תיאור IPC-A-610Hהוא תקן הקבלה להרכבת אלקטרוניקה הנפוץ ביותר בתעשיית האלקטרוניקה. תקן IPC-A-610H כולל עדכון כללי למסמך, מציג מספר סוגי רכיבי הרכבה חדשים על פני השטח ומסיר תנאי יעד. משתתפים מ-29 מדינות סיפקו את הקלט והמומחיות שלהם כדי להביא מסמך זה לתעשיית האלקטרוניקה. זו חובה עבור מבקרים, מפעילים ואחרים שלהם עניין בקריטריוני הקבלה עבור הרכבות אלקטרוניות. IPC-A-610 פותח בסינרגיה עם J-STD-001 ו- IPC...
401-425 of 671

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards