Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-A-610 - Revision D - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
D
Product Type
Standard with amendment(s)
Released:  02/01/2005
Language
English
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 Telecom Addendum Published August 2009. Download the Telecom Addendum. When specifically required by procurement documentation, this Addendum...
no-image-available

IPC-9503 - Standard Only

Moisture Sensitivity Classification for Non-IC Components

Document #:
IPC-9503
Revision
Original Version
Product Type
Standard Only
Released:  04/01/1999
Language
English
Current Revision
This standard identifies the moisture sensitivity classification level of passive surface mount devices and through-hole components, subjected to reflow soldering, so that they can be properly packaged, stored, and handled to avoid subsequent thermal/mechanical damage during assembly solder reflow attachment and/or repair operation. This standard may be used to determine what classification level...
no-image-available

IPC-9708 - Standard Only

Test Methods for Characterization of Printed Board Assembly Pad Cratering

Document #:
IPC-9708
Revision
Original Version
Product Type
Standard Only
Released:  12/14/2010
Language
English
Current Revision
Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...
no-image-available

IPC-9706 - Standard Only

Mechanical Shock In-situ Electrical Metrology Test Guidelines for FCBGA SMT Component Solder Crack and Pad Crater/Trace Crack Detection

Document #:
IPC-9706
Revision
Original Version
Product Type
Standard Only
Released:  01/14/2014
Language
English
Current Revision
Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...

IPC-9591 - Standard Only

Performance Parameters (Mechanical, Electrical, Environmental and Quality/Reliability) for Air Moving Devices

Document #:
IPC-9591
Revision
Original Version
Product Type
Standard Only
Released:  04/01/2006
Language
English
Current Revision
This document standardizes the performance parameters for air moving devices. The phrase "air moving device" (or "air mover") refers to equipment such as, fans, blowers and other forced air movement technologies. These air moving devices are used in the electronics industry for the cooling of heat-producing components, and range from small devices mounted directly to hot components such as...

IPC-9641 - Standard Only

High Temperature Printed Board Flatness Guideline

Document #:
IPC-9641
Revision
Original Version
Product Type
Standard Only
Released:  07/10/2013
Language
English
Current Revision
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

IPC-9301 - Standard Only

Numerical Analysis Guidelines for Microelectronics Packaging Design and Reliability

Document #:
IPC/JEDEC-9301
Revision
Original Version
Product Type
Standard Only
Released:  01/15/2019
Language
English
Current Revision
The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

IPC-9199 - Standard Only

Statistical Process Control (SPC) Quality Rating

Document #:
IPC-9199
Revision
Original Version
Product Type
Standard Only
Released:  09/01/2002
Language
English
Current Revision
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

IPC-9702 - Standard with Amendment 1

Monotonic Bend Characterization of Board-Level Interconnects

Document #:
IPC-9702
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  08/18/2015
Language
English
Current Revision
This publication is intended to characterize the frature strength of a component's board level-interconnect by providing a common method of establishing the fracture resistance to flexural loading that may occur during conventional non-cyclic board assembly and test operations. The document is applicable to surface mount components attached to printed wiring boards using conventional solder reflow...

IPC-8413 - Standard Only

Specification for Process Carriers Used to Handle Optical Fibers in Manufacturing

Document #:
IPC-8413
Revision
Original Version
Product Type
Standard Only
Released:  04/01/2003
Language
English
Current Revision
The purpose of this specification is to define standard practices for handling various kinds of optical fiber and to define the specifications and guidelines to be used in the design of carriers for these fibers in component manufacturing. This document is identified in the overarching IPC-0040, Optoelectronic Assembly and Packaging Technology. This standard does not define a particular carrier...

IPC-8701 - Standard Only

Final Acceptance Criteria Standard for PV Modules-Final Module Assembly

Document #:
IPC-8701
Revision
Original Version
Product Type
Standard Only
Released:  07/16/2014
Language
English
Current Revision
IPC-8701 presents acceptance guidelines for the solar panel in final module assembly. The intent of this standard is to cover crystalline solar modules.Some of the content may be applicable to other photovoltaic modules such as thin film. The standard reviews and includes acceptance guidelines for incoming and finished frames, frame assembly, sealant, tape, junction box assembly, and bus bar...

IPC-7621 - Standard Only

Guideline for Design, Material Selection and General Application of Encapsulation of Electronic Circuit Assembly by Low Pressure Molding with Thermoplastics

Document #:
IPC-7621
Revision
Original Version
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

IPC-6903 - Standard Only

Terms and Definitions for the Design and Manufacture of Printed Electronics (Additive Circuitry)

Document #:
IPC-6903
Revision
D
Product Type
Standard Only
Released:  10/29/2015
Language
English
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.
no-image-available

IPC-TP-1114 - Technical Paper

The Layman's Guide to Qualifying a Process to J-STD-001

Document #:
IPC-TP-1114
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1998
Language
English
Current Revision
Originally developed for J-STD-001B, it is also applicable to current assembly standards. Electronics manufacturers are faced with the difficult task of proving that a candidate manufacturing process can produce acceptable hardware, either to the customer of the product, or for internal quality control. Users have to determine many of the process qualification steps on their own. This document...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
no-image-available

IPC-2501 - Standard Only

Definition for Web-Based Exchange of XML Data

Document #:
IPC-2501
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
no-image-available

IPC-1331 - Standard Only

Voluntary Safety Standard for Electrically Heated Process Equipment

Document #:
IPC-1331
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2000
Language
English
Current Revision
This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  10/02/2017
Language
English
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

IPC-4552 - Revision A - Standard Only

Performance Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Boards

Document #:
IPC-4552
Revision
A
Product Type
Standard Only
Released:  08/22/2017
Language
English
The IPC-4552A performance specification sets requirements for Electroless Nickel/Immersion Gold (ENIG) deposit thicknesses for applications including soldering, wire bonding and as a contact finish. The IPC-4552A is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) and original equipment manufacturers (OEM). The IPC-4552A standard may be...

IPC-7711/21 - Revision C - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  02/01/2017
Language
English
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.

IPC-7912 - Revision A - Standard Only

End-Item DPMO for Printed Circuit Board Assemblies

Document #:
IPC-7912
Revision
A
Product Type
Standard Only
Released:  01/01/2004
Language
English
Finally - an end to the confusion when calculating defect opportunities for benchmarking! For customers and manufacturers, it seems like every company has a unique way of calculating defects and then reporting on quality. In a complex electronics assembly operation, is it best to calculate using the number of components? The number of leads? What about solder joints? How can companies calculate...
no-image-available

IPC-A-620 - Revision B - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  10/30/2012
Language
English
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC-J-STD-006 - Revision B - Standard with Amendments 1 & 2

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
B
Product Type
Standard with amendment(s)
Released:  10/22/2009
Language
English
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
126-150 of 671

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards