Standards

Your results

Products

Document #:

IPC-J-STD-001

Revision

Product Type

Standard Only

Released: 04/02/2024

Language

English

Current Revision

IPC J-STD-001J is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise. IPC J-STD-001J is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies. IPC J-STD-001 is developed in synergy with IPC-A-610 and is...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 02/06/2024

Language

English

Current Revision

The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.

Document #:

IPC/JEDEC-J-STD-033

Revision

Product Type

Standard Only

Released: 04/04/2018

Language

English

Current Revision

IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...

Document #:

IPC/JEDEC-J-STD-020

Revision

Product Type

Standard Only

Released: 02/16/2023

Language

English

Current Revision

IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...

Document #:

IPC-2223

Revision

Product Type

Standard Only

Released: 01/24/2020

Language

English

Current Revision

IPC-2223E used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. IPC-2223E provides new design...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard Only

Released: 05/01/2024

Language

English

Current Revision

IPC J-STD-004D standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. IPC J-STD-004D standard may be used for quality control and procurement purposes.

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 01/29/2026

Language

English

Current Revision

This standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain...

Document #:

EIA/IPC/JEDEC-J-STD-002

Revision

Product Type

Standard Only

Released: 11/01/2017

Language

English

Current Revision

IPC-J-STD-002E prescribes test methods, defect definitions, acceptance criteria, and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs, and tabs. The IPC-J-STD-002E standard also includes a test method for the resistance to dissolution/dewetting of metallization. IPC-J-STD-002E is intended for use by both supplier and user...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 12/01/2025

Language

English

Current Revision

IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 10/17/2024

Language

English

Current Revision

The IPC-7095E describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095E provides the useful and practical information to those who use or are considering using BGAs. IPC-7095E provides descriptions on how to...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 11/01/2023

Language

English

Current Revision

IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 07/09/2019

Language

English

Current Revision

The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

Document #:

IPC-CM-770

Revision

Product Type

Standard Only

Released: 01/01/2004

Language

English

Current Revision

This revision provides effective guidelines in the preparation and attachment of components for printed circuit board assembly and reviews pertinent design criteria, impacts and issues. It contains techniques for assembly (both manual and machines including SMT, BGA and flip chip) and consideration of, and impact upon, subsequent soldering, cleaning, and coating processes. 150 pages. Revised...

Document #:

IPC-D-350

Revision

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

This document bears two reference numbers, and may be obtained from IPC or the IEC. IPC-D-350D and IEC 1182-1 are identical in technical content. The IEC version of this document also contains a French translation. The IEC is responsible for the accuracy of that translation.Specifies record formats used to describe printed board products with detail sufficient for tooling, manufacturing and...

Document #:

IPC-1782

Revision

Product Type

Standard Only

Released: 10/20/2023

Language

English

Current Revision

IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as deﬁned by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

Document #:

IPC-9797

Revision

Product Type

Standard Only

Released: 05/18/2023

Language

English

Current Revision

IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

Document #:

IPC-J-STD-005

Revision

Product Type

Standard Only

Released: 05/01/2024

Language

English

Current Revision

IPC J-STD-005B standard lists the requirements for qualification and characterization of solder paste. It references test methods, criteria, and metal content, viscosity, slump, solder ball, tack and wetting of solder pastes. Additional support is provided in IPC-HDBK-005, Guide to Solder Paste Assessment.

Document #:

IPC-1602

Revision

Product Type

Standard Only

Released: 12/17/2024

Language

English

Current Revision

The industry's sole standard on the handling, packaging and storage of printed boards. The requirements in this document are intended to protect printed boards from contamination, physical damage, solderability degradation, ESD and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking...

Document #:

IPC-7351

Revision

Product Type

Standard Only

Released: 07/01/2010

Language

English

Current Revision

This popular document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SOPs, QFPs, BGAs, QFNs and SONs. The standard provides printed board designers with an intelligent land pattern naming convention, zero component rotations for CAD systems and three separate land pattern geometries for each component that allow the user to select...

Document #:

IPC-D-620

Revision

Product Type

Standard Only

Released: 02/28/2022

Language

English

Current Revision

The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...

Document #:

IPC-D-356

Revision

Product Type

Standard Only

Released: 10/01/2002

Language

English

Current Revision

UPDATED! This standard describes a data format for transmitting bare board electrical test information in digital form, including data suitable for computer-aided repair. When used as a netlist input to test data processing, the receiver of IPC-D-356B data will determine test point assignments and positioning. Enhancements to the B Revision include updates to the concept of testable areas to...

Document #:

IPC-2231

Revision

Product Type

Standard Only

Released: 10/27/2021

Language

English

Current Revision

IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.

Document #:

IPC-7525

Revision

Product Type

Standard Only

Released: 02/28/2022

Language

English

Current Revision

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

Document #:

IPC-7530

Revision

Product Type

Standard Only

Released: 03/13/2025

Language

English

Current Revision

This document provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies using reflow, vapor phase, laser, selective and wave soldering equipment. The document also includes a troubleshooting guide for addressing common defects which can be attributed to profiling.

Document #:

IPC-D-326

Revision

Product Type

Standard Only

Released: 01/01/2004

Language

English

Current Revision

Covers the information requirements for the procurement of material, box build, assembly, system integration, inspection, test, burn-in, delivery and/or distribution of electronic assemblies. 5 pages. Released January 2004.

Document #:

IPC-2222

Revision

Product Type

Standard Only

Released: 10/07/2020

Language

English

Current Revision

IPC-2222B used in conjunction with IPC-2221, establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. The IPC-2222B standard applies to single-sided, double-sided, or multi-layered boards. Key concepts in IPC-2222B are rigid laminate properties, design requirements for printed board assembly and...

Document #:

IPC-2221

Revision

Product Type

Standard Only

Released: 12/14/2023

Language

English

Current Revision

IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...

Document #:

IPC-2226

Revision

Product Type

Standard Only

Released: 10/12/2017

Language

English

Current Revision

IPC-2226A, Sectional Design Standards for High Density Interconnect (HDI) Printed Boards is used in conjunction with IPC-2221B. The IPC-2226A standard establishes requirements and considerations for the design of high density interconnect (HDI) printed boards and microvia technology. Revision A constitutes a substantial update to the document, with an all new color key for HDI constructions, new...

Document #:

IPC-1720

Revision

Product Type

Standard Only

Released: 08/02/2004

Language

English

Current Revision

Developed by the OEM council of the IPC, IPC-1720A categorizes electronic assembly manufacturer capabilities and supplies the OEM customer with detailed, substantive information. This program simplifies auditing processes and reduces the frequency of audits, thereby decreasing paperwork and improving efficiency. Company and Site Description, Site Capability Snap Shot, Equipment Profile (Pre-site...

Document #:

IPC-7526

Revision

Product Type

Standard Only

Released: 04/12/2022

Language

English

Current Revision

IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.

Document #:

IPC-9592

Revision

Product Type

Standard Only

Released: 01/14/2013

Language

English

Current Revision

This document standardizes the requirements for power conversion devices (PCDs) for the computer and telecommunications industries. The phrase “power conversion devices” refers to ac to dc and dc to dc modules, converters and power supplies. This specification sets the requirements for design; qualification testing; conformance testing and manufacturing quality/reliability processes, but does not...

Document #:

IPC-7093

Revision

Product Type

Standard Only

Released: 11/30/2020

Language

English

Current Revision

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

Document #:

IPC-J-STD-006

Revision

Product Type

Standard Only

Released: 05/26/2017

Language

English

Current Revision

This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...

Document #:

IPC-D-325

Revision

Product Type

Standard Only

Released: 05/01/1995

Language

English

Current Revision

Establishes the general requirements for documentation necessary to fully describe end product printed boards, regardless of raw material, special fabrication requirements, layer count or end product usage. Includes master drawing requirements, board definition and artwork/phototooling. 94 pages. Revised May 1995.

Document #:

IPC/JEDEC-9704

Revision

Product Type

Standard Only

Released: 02/03/2012

Language

English

Current Revision

Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...

Document #:

IPC-9701

Revision

Product Type

Standard Only

Released: 04/12/2022

Language

English

Current Revision

The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...

Document #:

IPC/JEDEC-J-STD-609

Revision

Product Type

Standard Only

Released: 02/05/2025

Language

English

Current Revision

This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: 1. those assemblies that are assembled with lead-containing or lead-free solder; 2. components that have lead-containing or lead-free second level interconnect terminal finishes and materials; 3. the maximum component temperature not to be exceeded during...

Document #:

JEDEC/ECIA/IPC-J-STD-046

Revision

Product Type

Standard Only

Released: 01/22/2026

Language

English

Current Revision

This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.

Document #:

IPC-J-STD-048

Revision

Product Type

Standard Only

Released: 01/22/2026

Language

English

Current Revision

This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard with amendment(s)

Released: 02/15/2023

Language

English

Current Revision

The IPC J-STD-004C WAM1 standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-STD-004C WAM1 standard may be used for quality control and procurement purposes. Soldering flux materials include the following: liquid flux, paste flux, solder paste, solder cream as well as flux-coated and flux-cored solder...

Document #:

IPC-A-640

Revision

Product Type

Standard Only

Released: 05/31/2022

Language

English

Current Revision

The IPC-A-640A standard provides acceptance requirements and technical insight that have been removed from acceptance standards for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640A is intended for use by the design engineer, manufacturing engineer, quality engineer and other individuals responsible for tailoring specific...

Document #:

IPC-D-640

Revision

Product Type

Standard Only

Released: 05/31/2022

Language

English

Current Revision

The IPC-D-640A standard provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-D-640A standard is intended to provide information on the general design requirements for optical fiber, optical cable, hybrid wiring harness assemblies, and Fiber Optic Communications...

Document #:

IPC-7801

Revision

Product Type

Standard Only

Released: 09/14/2022

Language

English

Current Revision

The IPC-7801A standard provides requirements for process control of conveyorized solder reflow ovens. It includes a methodology for performing temperature measurements over time to establish a baseline profile, and then provides requirements to verify repeatability through periodic verification of the oven profile.

Document #:

IPC-9203

Revision

Product Type

Standard Only

Released: 02/16/2023

Language

English

Current Revision

While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...

Document #:

IPC/JEDEC-J-STD-035

Revision

Product Type

Standard Only

Released: 02/16/2023

Language

English

Current Revision

IPC/JEDEC J-STD-035A test method defines the procedures for performing acoustic microscopy on nonhermetic encapsulated electronic devices. IPC/JEDEC J-STD-035A method provides users with an acoustic microscopy process flow for detecting anomalies (delaminations, cracks, mold compound voids, etc.) nondestructively in encapsulated electronic devices while achieving reproducibility

Document #:

IPC-9121

Revision

Product Type

Standard Only

Released: 04/14/2022

Language

English

Current Revision

The IPC-1921A handbook provides problems, causes and possible corrective actions related to printed board manufacturing processes. Includes more than 200 photos and illustrations depicting common defects.

Document #:

IPC-7091

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

English

Current Revision

This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the eﬀects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

Document #:

IPC-2581

Revision

Product Type

Standard Only

Released: 11/20/2020

Language

English

Current Revision

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

Document #:

IPC-9202

Revision

Product Type

Standard Only

Released: 10/28/2022

Language

English

Current Revision

The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...

Document #:

IPC-1401

Revision

Product Type

Standard Only

Released: 11/29/2021

Language

English

Current Revision

The IPC-1401A standard specifies the requirements and best practice guidelines for an effective corporate social responsibility (CSR) management system to help an enterprise integrate CSR as a customer requirement into products and value chain activities, as well as to identify and manage CSR risks and opportunities through cooperation with customers and suppliers, to enhance the competitive...