Products
Le présent Addendum IPC-J-STD-001HS relatif aux applications spatiales et militaires présente des exigences qui complètent ou remplacent des exigences spécifiques de la norme J-STD-001H, pour les assemblages électriques et électroniques brasés qui doivent résister aux vibrations et aux importantes variations thermiques subies dans des applications spatiales et militaires.
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.
IPC J-STD-001HS 航天和军用附录，补充或替代 IPC J-STD-001H 对焊接电气和电子组件的具体要求，这些组件必须能够承受进入航天和军事应用并在其中运行的振动和热循环环境。
IPC-2591 CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi automated and manual, and is applicable to related mechanical...
The IPC-2591v1.3 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...
IPC-2591 version 1.2 (CFX) standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 version 1.2 (CFX) standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable...
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...
IPC-9191 reflects the principals of statistical process control (SPC) represented by ISO/DIS 11462-1, Guidelines for Implementation of Statistical Process Control (SPC) -- Part 1: Elements of SPC. This document outlines the SPC philosophy, implementation strategies, tools, and techniques used for relating process control and capability to final product requirements. Supersedes IPC-PC-90.
This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...
Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...
This guideline standard is intended to aid in interpretation of the requirements in IPC-9191, "General Guidelines for Implementation of Statistical process Control," specifically for printed board assembly (PBA) manufacture. This document and IPC-9191 should be used together; the standards are cross-referenced to each other in the Appendices of this guideline. This standard promotes process...
During mass soldering, it is important that all solder joints reach the minimum soldering (reflow) temperature to assure metallurgical bonding of the solder alloy and the base metals to be soldered. Metallurgical bonding requires that both surfaces to be soldered, as well as the solder, reach this minimum soldering temperature for a sufficient time to allow the wetting of the solder surfaces. This...
This guideline addresses the major factors influencing the design of high-speed circuitry. Considerations include electrical noise, electromagnetic interference, signal propagation time, impedance, thermo-mechanical environmental protection, and heat dissipation. Supersedes IPC-D-317A. Key improvements over the IPC-D-317A document include updated impedance models for embedded microstrip, centered...
Published jointly with the Japan Printed Circuits Association, IPC/JPCA-2315 provides an easy to follow tutorial on the selection of HDI and microvia design rules and structures. Addresses various considerations when designing an HDI printed wiring board including design examples and processes, selection of materials, general descriptions, and various microvia technologies. Offers designers and...
Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...
Guidelines for accelerated reliability testing of surface mount solder attachments when evaluating and extrapolating the results of these tests towards actual use environments of electronic assemblies. 50 pages. Released November 1992. Included in the IPC-C-103 and the IPC-C-1000 Collections
This informative document describes the implementation of flip chip and related chip scale semiconductor packaging technologies. The areas discussed include design considerations, assembly processes, technology choices, application and reliability data. Chip packaging variations include flip chip, HDI, micro BGA, micro SMT and SLICC. Also provides general information on implementing flip chip and...
The IPC-A-640, Acceptance Requirements for Optical Fiber, Optical Cable and Hybrid Wiring Harness Assemblies standard provides acceptance requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640 standard includes full-color illustrations and an Excel spreadsheet Verification and Compliance...
This standard establishes mechanical outline requirements for devices supplied in flip chip or Chip Size Package (CSP) formats, including die surface, die terminals, and interconnection balls/bumps/lands to the next level. 13 Pages. Released February 2003.
This full-color document provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. This standard also includes an Excel spreadsheet Verification and Compliance checklist.
This test method defines the procedures for performing acoustic microscopy on non-hermetic encapsulated electronic components. It provides users with an acoustic microscopy process flow for detecting defects non-destructively in plastic packages while achieving reproducibility. Developed by IPC and JEDEC. 16 pages. Released April 1999. Equivalent to IEC Publicly Available Specification (PAS) 62191
This document establishes the requirements and interactions necessary for printed board assembly processes for interconnecting high performance/high pin count IC packages. Includes information on design principles, material selection, board fabrication, assembly technology, testing strategy and reliability expectations based on end-use environments. Developed by IPC, EIA, MCNC and Sematech. 96...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards