Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-A-610 - Revision D - Addendum - Telecom

IPC-A-610DC-Telecom Addendum

Document #:
IPC-A-610
Revision
D
Product Type
Addendum
Released:  08/01/2009
Language
English
Telecom Addendum to IPC-A-610D Acceptability of Electronic Assemblies Telecom Addendum Published August 2009. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC-A-610, Revision D of February 2005 by providing additional requirements to ensure compliance to GR-78-CORE.

IPC/WHMA-A-620 - Revision C - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  03/30/2018
Language
English
IPC/WHMA-A-620C-S provides additional requirements to IPC/WHMA-A-620C to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620C-S space addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620C.
no-image-available

IPC/WHMA-A-620 - Revision B - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620B

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Addendum
Released:  06/01/2013
Language
English
When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision B, providing additional requirements to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required IPC training & certification...
no-image-available

IPC-A-620 - Revision A - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Addendum
Released:  07/16/2012
Language
English
IPC/WHMA-A-620AS with Amendment 1 Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A Requirements and Acceptance for Cable and Wire Harness Assemblies. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A of July 2006 by providing additional requirements to ensure the...

IPC-1602 - Standard Only

Standard for Printed Board Handling and Storage

Document #:
IPC-1602
Revision
Original Version
Product Type
Standard Only
Released:  04/07/2020
Language
English
The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...
no-image-available

IPC-J-STD-001 - Revision H - Addendum - Space and Military

Ergänzung Elektronik-Hardware für Raumfahrt- und Militäranwendungen zu IPC J-STD-001H Anforderungen an gelötete elektrische und elektronische Baugruppen

Document #:
IPC-J-STD-001
Revision
H
Product Type
Addendum
Released:  06/22/2022
Language
German
Current Revision
Die Richtlinie IPC J-STD-001HS-DE Ergänzung für Raumfahrt-Anwendungen ergänzt oder ersetzt spezifisch identifizierte Anforderungen von IPC J-STD-001H-DE für gelötete elektrische und elektronische Baugruppen, die Schwingungen und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischen Anwendungen überstehen müssen.
no-image-available

IPC-J-STD-001 - Revision J - Addendum - Space and Military

J-STD-001Jはんだ付される電気および電子組立品に関する要求事項：宇宙・軍事用途向け追加規格

Document #:
IPC-J-STD-001
Revision
J
Product Type
Addendum
Released:  01/22/2026
Language
Japanese
Current Revision
“IPC J-STD-001JS 宇宙・軍事用途向け追加規格”は、IPC J-STD-001Jの要求事項のうち特定の要件を補完する/置き換えるものであり、宇宙および軍事用途において、輸送時や運用時の振動/熱サイクル環境に耐えることが求められる電気・電子組立品を対象としている。

IPC-4821 - Standard Only

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Standard Only
Released:  05/01/2006
Language
English
This document describes materials that can be used for the fabrication of embedded passive capacitor devices within the finished printed circuit board substrate. For this document, embedded passive devices and the phrase embedded passives are considered to be equivalent. It provides information on general designations and associated characteristics of embedded passive device (EPD) capacitor...
no-image-available

IPC-1754 - Standard with Amendment 1

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  04/26/2019
Language
English
IPC-1754 WAM 1 Materials and Substances Declaration for Aerospace and Defense and Other Industries establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
no-image-available

IPC-J-STD-001 and IPC-A-610 - Revision J - Addendum - Automotive

IPC J-STD-001J はんだ付される電気および電子組立品、およびIPC-A-610J 電子組立品の許容基準：車載用途向け追加規格

Document #:
IPC-J-STD-001 and IPC-A-610
Revision
J
Product Type
Addendum
Released:  01/05/2026
Language
Japanese
Current Revision
IPC J-STD-001JA/IPC-A-610JAは、J-STD-001JおよびIPC-A-610Jの車載用途向け追加規格である。本書は、自動化された大量生産という条件を考慮しながら、過酷な環境下にある車載用電気・電子組立品について、そのはんだ付け信頼性を保証するための基準を提供するものである。 IPC J-STD-001JA/IPC-A-610JA(Addendum：追加規格)は独立した文書として使用するのではなく、J-STD-001JおよびIPC-A-610Jと併用する必要がある。
IPC-2591_1-5 Cover Image

IPC-2591 - Version 1.5 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.5
Product Type
Standard Only
Released:  08/04/2022
Language
English
IPC-2591, CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical...

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
no-image-available

IPC-SMEMA 3.1 - Standard Only

SMEMA3.1 - Fiducial Mark Standard

Document #:
IPC-SMEMA 3.1
Revision
Original Version
Product Type
Standard Only
Released:  02/12/2007
Language
English
This SMEMA standard is for fiducial marks. It was developed to facilitate the accurate placement of components on printed circuit boards.
no-image-available

IPC-J-STD-001 and IPC-A-610 - Revision H - Addendum - Automotive

Automotive-Ergänzung zu IPC J-STD-001H-DE Anforderungen an gelötete elektrische und elektronische Baugruppen und IPC-A-610H-DE, Abnahmekriterien für elektronische Baugruppen

Document #:
IPC-J-STD-001 and IPC-A-610
Revision
H
Product Type
Addendum
Released:  08/24/2023
Language
German
Current Revision
001H-DE und IPC-A-610H-DE enthält Kriterien zur Sicherstellung der Zuverlässigkeit gelöteter elektrischer und elektronischer Automotive-Baugruppen im Feld unter rauen Umgebungsbedingungen und berücksichtigt die Bedingungen einer automatisierten Großserienproduktion. Die Ergänzung IPC J-STD-001HA-DE/IPC-A-610HA-DE ist kein eigenständiges Dokument. Diese Ergänzung fordert, dass sie in Verbindung mit...
no-image-available

IPC-2591 - Version 1.6 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.6
Product Type
Standard Only
Released:  03/20/2023
Language
English
IPC-2591, Version 1.6 establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, Version 1.6 applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly...
401-425 of 747

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards