Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

J-STD-012 - Standard Only

Implementation of Flip Chip & Chip Scale Technology

Document #:
IPC-J-STD-012
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1996
Language
English
This informative document describes the implementation of flip chip and related chip scale semiconductor packaging technologies. The areas discussed include design considerations, assembly processes, technology choices, application and reliability data. Chip packaging variations include flip chip, HDI, micro BGA, micro SMT and SLICC. Also provides general information on implementing flip chip and...
no-image-available

IPC/JEDEC-J-STD-035 - Standard Only

Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components

Document #:
IPC/JEDEC-J-STD-035
Revision
Original Version
Product Type
Standard Only
Released:  04/01/1999
Language
English
This test method defines the procedures for performing acoustic microscopy on non-hermetic encapsulated electronic components. It provides users with an acoustic microscopy process flow for detecting defects non-destructively in plastic packages while achieving reproducibility. Developed by IPC and JEDEC. 16 pages. Released April 1999. Equivalent to IEC Publicly Available Specification (PAS) 62191
no-image-available

J-STD-013 - Standard Only

Implementation of Ball Grid Array & Other High Density Technology

Document #:
IPC-J-STD-013
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
This document establishes the requirements and interactions necessary for printed board assembly processes for interconnecting high performance/high pin count IC packages. Includes information on design principles, material selection, board fabrication, assembly technology, testing strategy and reliability expectations based on end-use environments. Developed by IPC, EIA, MCNC and Sematech. 96...

IPC-7526 - Standard Only

Stencil and Misprinted Board Cleaning Handbook

Document #:
IPC-7526
Revision
Original Version
Product Type
Standard Only
Released:  02/13/2007
Language
English
Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...

IPC-7093 - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components

Document #:
IPC-7093
Revision
Original Version
Product Type
Standard Only
Released:  03/28/2011
Language
English
This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive...

IPC-7091 - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
Original Version
Product Type
Standard Only
Released:  09/25/2017
Language
English
The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...
no-image-available

IPC-7351 - Standard Only

Generic Requirements for Surface Mount Design and Land Pattern Standard

Document #:
IPC-7351
Revision
Original Version
Product Type
Standard Only
Released:  02/01/2005
Language
English
The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SSOPs, TSSOPs, QFPs, BGAs, QFNs and SONs. The standard provides many brand new features, including an intelligent land pattern naming convention, zero component rotations for CAD systems, and a set of three separate land pattern...
no-image-available

IPC-7092 - Standard Only

Design and Assembly Process Implementation for Embedded Components

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  02/18/2015
Language
English
This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...

IPC-2231 - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
Original Version
Product Type
Standard Only
Released:  05/14/2019
Language
English
The IPC-2231 standard provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed board assemblies that utilize surface mount and through hole devices.

IPC-1791 - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
English
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。
no-image-available

IPC-7711/21 - Revision C - Redline Standard

Rework, Modification and Repair of Electronic Assemblies - Redline

Document #:
IPC-7711/21
Revision
C
Product Type
Redline Standard
Released:  05/30/2017
Language
English
This is a redline document showing the changes from IPC-7711/21B to IPC-7711/21C. This 790+ page document provides a side-by-side comparison of the two documents and includes the figures. The document shows the deleted/changed text in the IPC-7711/21B pages and the new/revised text in purple highlights in the IPC-7711/21C pages. Yellow pop-up boxes are also present in the IPC-7711/21C pages to...

IPC-T-50 - Revision H - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
H
Product Type
Standard Only
Released:  09/17/2009
Language
Chinese
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC-2231 - Standard Only

卓越设计（DFX）指南

Document #:
IPC-2231
Revision
Original Version
Product Type
Standard Only
Released:  04/09/2020
Language
Chinese
Current Revision
本文件提供了制定最佳实践方法的指南，用于在开发正式DFX（面向可制造性、可制作性、可组装性、可测试性、成本、可靠性、环境、重用性设计）的过程中对采用表面贴装和通孔器件的印制板组件进行布局。

IPC-7092 - Standard Only

埋入式元器件涉及和组装工艺的实施

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  01/20/2020
Language
Chinese
Current Revision
本标准描述了在印制板中以成形或放置方式实现的有源和无源元器件在设计和组装方面的挑战。包括内部电子元器件的完整结构可用于表面贴装和／或通孔元器件连接。在组装过程中，多层结构变成准备为进一步加工的完整产品，它可由有机、无机（陶瓷）或两类兼有的材料制成。
no-image-available

IPC/JEDEC-J-STD-020 - Revision D - Standard with Amendment 1

非气密固态表面贴装器件潮湿/再流焊敏感度分级

Document #:
IPC/JEDEC-J-STD-020
Revision
D
Product Type
Standard with amendment(s)
Released:  01/15/2010
Language
Chinese
简要介绍 （英文） J-STD-020D.1新增了无铅组装所用元器件的相关内容！本标准的目的是确定对湿气诱发应力敏感的非气密固态表面贴装器件（SMD）的潮湿敏感等级。它可用于确定SMD封装的初始可靠性认证应该采用的分级等级。从而能够对这些器件进行正确地包装、存储和操作，以避免其在随后的再流焊接操作时受到热/机械损伤。本标准由IPC和JEDEC联合开发，全文共24页，于 2008年3月公布。

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

非气密表面贴装器件潮湿/再流焊敏感度分级

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  01/30/2015
Language
Chinese
IPC JEDEC J-STD-020用于确定应该采用的MSL分类等级，从而能够对表面贴装器件（SMD）进行正确地包装、储存和操作，以避免其在再流焊和/或维修操作时受到损伤。J-STD-020涵盖的元器件，用于无铅工艺时，可在较高的温度下进行，用于锡铅工艺时，可在较低的温度下进行。 本次修订，许多处增加了说明，以确保覆盖面和应用的一致性。本标准包含了带聚合物层的裸晶粒和非IC封装使用的考虑。E版本也修订/更新了分级温度、封装体积、干燥重量特征、以及在确定干燥重量的过程中建议的时间间隔记录。也提供了烘烤时间的指导，当烘烤测试被中断时。2015年5月翻译。

EIA/IPC/JEDEC-J-STD-002 - Revision D - Standard Only

元器件引线、焊端、焊片、端子和导线的可焊性测试

Document #:
EIA/IPC/JEDEC-J-STD-002
Revision
D
Product Type
Standard Only
Released:  10/07/2015
Language
Chinese
本标准规定了用于评估电子元器件引线、焊端、实芯导线、多股导线、焊片和接触片可焊性的测试方法、缺陷定义及验收标准，并附有相关图表。本标准还包括金属层耐溶蚀性/退润湿的测试方法。本标准适用于供应商和用户。J-STD-002D由EIA、IPC和JEDEC开发。

IPC-7093 - Standard Only

底部端子元器件(BTC)设计和组装工艺的实施

Document #:
IPC-7093
Revision
Original Version
Product Type
Standard Only
Released:  03/28/2011
Language
Chinese
Current Revision
本标准描述了采用底部端子表面贴装元器件(BTC)在设计和组装方面的挑战，BTC元器件外部连接由构成元器件整体一部分的金属端子组成。本文件中BTC包括了仅有底部端子并要实施表面贴装的所有类型元器件。包括QFN、 DFN、 SON、 LGA、MLP 和MLF等业界描述性术语。这里所含信息的焦点放在BTCs元器件的关键设计、组装、检验、维修以及和BTC相关的可靠性问题上。 这份文件的目标读者是与电子设计、组装、检验和维修等过程有关的经理、设计和工艺工程师、操作员和技术员。本文件的目的是给正考虑采用锡/铅、无铅、粘合剂或其它形式互连工艺来组装BTC类元器件的那些公司提供实际而有用的资讯。虽然本文件不是包含一切的秘方，但它识别了影响进行稳健和可靠组装的许多特性，可给正面临组装制程问题的元器件供应商提供指导性的信息。全文共68页。2011年3月发布。2014年5月翻译。
no-image-available

EIA/IPC/JEDEC-J-STD-002 - Revision D - Errata

J-STD-002D Errata Information March 2014

Document #:
EIA/IPC/JEDEC-J-STD-002
Revision
D
Product Type
Errata
Released:  03/01/2014
Language
English
This is a list of reported errata to the printed copies of IPC/ECA J-STD-002D. Pen and ink changes should be made in accordance with your company's document control policies.
151-175 of 208

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards