This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
Products
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.
Originally developed for J-STD-001B, it is also applicable to current assembly standards. Electronics manufacturers are faced with the difficult task of proving that a candidate manufacturing process can produce acceptable hardware, either to the customer of the product, or for internal quality control. Users have to determine many of the process qualification steps on their own. This document...
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
Finally - an end to the confusion when calculating defect opportunities for benchmarking! For customers and manufacturers, it seems like every company has a unique way of calculating defects and then reporting on quality. In a complex electronics assembly operation, is it best to calculate using the number of components? The number of leads? What about solder joints? How can companies calculate...
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...
The IPC J-STD-004C standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-004C standard may be used for quality control and procurement purposes.
IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.
IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...
Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.
Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...
This standard lists requirements for qualification and characterization of solder paste. It references test methods and criteria for metal content, viscosity, slump, solder ball, tack and wetting of solder pastes. Additional support is provided in IPC-HDBK-005, Guide to Solder Paste Assessment (not included with purchase of this standard). Supersedes J-STD-005.
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
This standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. This standard may be used for quality control and procurement purposes. The purpose of this standard is to classify and characterize tin/lead and lead-free soldering flux materials for use in electronic metallurgical interconnections for printed circuit...
This standard establishes the parameters, procedures and methodologies used to measure and report pick and place machine accuracy as a relationship to placement speed for a range of SMT component sizes and configurations. Purchase of this standard includes support documentation, report forms and the test material drawings in DWG format.
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards