Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-T-50 - Revision P - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
P
Product Type
Standard Only
Released:  11/25/2025
Language
English
Current Revision
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

IPC-A-630 - Standard Only

Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

Document #:
IPC-A-630
Revision
Original Version
Product Type
Standard Only
Released:  10/04/2013
Language
English
Current Revision
This standard is the first of its kind for IPC; the first acceptability standard for electronic enclosures. It contains acceptability criteria that pertain to the "box build" of the assembly process. This standard has been written to direct manufacturers and end users of electronic enclosures of electrical and electronic equipment to understand the best practices to meet requirements, ensuring the...

IPC-4811 - Standard Only

Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4811
Revision
Original Version
Product Type
Standard Only
Released:  05/30/2008
Language
English
Current Revision
This document describes materials that can be used for the fabrication of embedded passive resistor devices within the finished printed circuit board substrate. It provides information on general designations and associated characteristics of embedded passive device (EPD) resistor materials. The document shall be used as a qualification and conformance standard for designers and users when...
no-image-available

JIG-101 - Standard Only

Joint Industry Guide Materials Composition Declaration for Electrotechnical Products

Document #:
JIG-101
Revision
4
Product Type
Standard Only
Released:  09/08/2011
Language
English
Current Revision
The Joint Industry Guide Material Composition Declaration for Electrotechnical Products has been updated to include the most recent substances for restriction. The JIG-101 is an industry materials declaration guide that facilitates reporting of material content information across the global electrotechnical supply chain. This document sets minimum requirements for a materials declaration. The...

IPC/WHMA-A-620 - Revision D - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  01/21/2020
Language
English
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
IPC-8401 Cover Image

IPC-8401 - Standard Only

Guidelines for In-Mold Electronics

Document #:
IPC-8401
Revision
Original Version
Product Type
Standard Only
Released:  10/22/2024
Language
English
Current Revision
IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...

IPC-5701 - Standard Only

Users Guide for Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5701
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
Tackling PCB cleanliness is a tough job; residues on printed circuit boards are directly related to the reliability of the produced hardware and can result in serious failures if not known or monitored. But how do you measure "cleanliness"? How clean is "clean"? The IPC-5701 provides guidance into how these issues should be approached and specified in purchasing documents, addressing levels of...

IPC-4563 - Standard Only

Resin Coated Copper Foil for Printed Boards Guideline

Document #:
IPC-4563
Revision
Original Version
Product Type
Standard Only
Released:  02/11/2008
Language
English
Current Revision
This guideline covers the requirements for resin coated copper foil intended for use in the formation of high density interconnect surface microvias for printed boards and printed board assemblies. 19 pages. Released November 2007.

IPC-4121 - Standard Only

Guidelines for Selecting Core Construction for Multilayer Printed Wiring Board Applications

Document #:
IPC-4121
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2000
Language
English
Current Revision
IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

IPC-1753 - Standard Only

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard Only
Released:  01/31/2014
Language
English
Current Revision
IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

IPC/EIA-J-STD-032 - Standard Only

Performance Standard for Ball Grid Array Balls

Document #:
IPC/EIA-J-STD-032
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2002
Language
English
Current Revision
This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-A-142 - Standard Only

Specification for Finished Fabric Woven from Aramid for Printed Boards

Document #:
IPC-A-142
Revision
Original Version
Product Type
Standard Only
Released:  06/01/1990
Language
English
Current Revision
Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.

IPC-9199 - Standard Only

Statistical Process Control (SPC) Quality Rating

Document #:
IPC-9199
Revision
Original Version
Product Type
Standard Only
Released:  09/01/2002
Language
English
Current Revision
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

IPC-8921 - Standard Only

Requirements for Woven and Knitted Electronic Textiles (E-Textiles) Integrated with Conductive Fibers, Conductive Yarns and/or Wires

Document #:
IPC-8921
Revision
Original Version
Product Type
Standard Only
Released:  12/05/2019
Language
English
Current Revision
The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classifications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and definitions for...

IPC-7621 - Standard Only

Guideline for Design, Material Selection and General Application of Encapsulation of Electronic Circuit Assembly by Low Pressure Molding with Thermoplastics

Document #:
IPC-7621
Revision
Original Version
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

IPC-6903 - Standard Only

Terms and Definitions for the Design and Manufacture of Printed Electronics (Additive Circuitry)

Document #:
IPC-6903
Revision
D
Product Type
Standard Only
Released:  10/29/2015
Language
English
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

IPC-4101 - Revision D - Standard with Amendment 1

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard with amendment(s)
Released:  05/12/2014
Language
English
IPC-4101D-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 65 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but with...

IPC-4101 - Revision D - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard Only
Released:  05/12/2014
Language
English
This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...
51-75 of 303

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards