The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
Products
This standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain...
IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
IPC/WHMA-A-620F-RL is a redline document showing the difference from IPC/WHMA-A-620E to IPC/WHMA-A-620F. IPC/WHMA-A-620F-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed/moved text in the IPC/WHMA-A-620E pages and new/revised/moved text in the IPC/WHMA-A-620F pages. This is a visual tool showing the changes as a...
IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...
This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...
IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.
IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B. When there are changes to a...
IPC/WHMA-A-620E ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620E beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
IPC/WHMA-A-620E est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620E décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...
El IPC/WHMA-A-620E es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620E describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...
IPC/WHMA-A-620D er den eneste industriudviklede standard for ” Godkendelseskrav for kabler og for produkter med wire harness”. IPC/WHMA-A-620D beskriver materialer, metoder, test og godkendelseskriterier for fremstilling af crimpede samlinger, mekanisk sikrede og loddede forbindelser samt de tilhørende monteringsprocesser som er forbundet med kabel og harness produkter. IPC/WHMA-A-620D blev...
IPC/WHMA-A-620Eは、ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準に関する、唯一の業界合意文書(規格書)である。IPC/WHMA-A-620Eでは、ケーブルおよびハーネス組立品に関係する配線の圧着、機械的固定、またははんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明している。 IPC/WHMA-A-620Eは、IPCおよびThe Wire Harness Manufacturers Association (WHMA) (IPCの関連団体)により作成されたものである。
IPC/WHMA-A-620D jest jedynym standardem branżowym dotyczącym Wymagań i Akceptacji dla Montażu Kabli i Wiązek Przewodów. IPC/WHMA-A-620D opisuje materiały, metody, testy i kryteria akceptacji dla tworzenia zagniatanych, mechanicznie zabezpieczonych i lutowanych połączeń oraz powiązanych czynności montażowych związanych z zespołami kabli i wiązek przewodów. IPC/WHMA-A-620D został opracowany przez...
Der Leitfaden IPC-7711/21 enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen, einschließlich Werkzeugen und Materialien, häufig angewendete Verfahren, Entfernung der Beschichtung und Grafiken zur Unterstützung des Benutzers.
這份指南提供了對使用者有説明的印製板元件的返工，維修和修改程式，包含工具和材料，通用程式，塗敷的清除和圖形
このガイドは、プリント基板組立品のリワーク、リペアおよび改造の手順について紹介するものである。工具や材料、一般的な手順、コーティングの除去方法、およびユーザーの助けとなるようなグラフィック等が掲載されている
这份指南提供了对使用者有帮助的印制板组件的返工，维修和修改程序，包含工具和材料，通用程序，涂敷的清除和图形
IPC/WHMA-A-620E 是線纜及線束元件的要求與驗收的唯一行業共識標準。本標準描述了用於壓接、機械緊固或焊接互連的材料、方法、測試和可接受性標準以及其他線纜線束元件組裝活動的相關標準。 IPC/WHMA-A-620E由IPC和線束製造商協會（WHMA）（隸屬於IPC）共同開發
IPC/WHMA-A-620E là tiêu chuẩn duy nhất trong ngành được đồng thuận về Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây Điện và Cáp Điện. IPC/WHMA-A-620E mô tả các nguyên vật liệu, phương pháp, cách kiểm tra và tiêu chuẩn chấp nhận để sản xuất các liên kết bấm, cố định cơ học, hoặc hàn, cũng như các hoạt động lắp ráp có liên quan liên quan đến các bộ dây điện và cáp điện. IPC/WHMA-A-620E được phát...
คู่มือนี้ให้ขั้นตอนการทำซ้ำ ซ่อมแซม และดัดแปลงชุดประกอบแผงวงจรพิมพ์ รวมถึงเครื่องมือ วัสดุ ขั้นตอนทั่วไป การกำจัดสารเคลือบผิว และกราฟิกเพื่อช่วยเหลือผู้ใช้
IPC/WHMA-A-620E เป็นมาตรฐานที่มีความเห็นร่วมกันในอุตสาหกรรมเพียงมาตรฐานเดียวสำหรับข้อกำหนดและการยอมรับของการประกอบชุดสายไฟและสายเคเบิล IPC/WHMA-A-620E อธิบายเกี่ยวกับวัสดุ วิธีการ การทดสอบ และเกณฑ์การยอมรับสำหรับการผลิตการเชื่อมต่อแบบคริม (crimped), การรักษาเชิงกล (mechanically secured) และการเชื่อมบัดกรี (soldered) รวมถึงกิจกรรมการประกอบที่เกี่ยวข้องกับการประกอบสายไฟและสายเคเบิล IPC/WHMA-A-620E...
Hướng dẫn này cung cấp các quy trình liên quan đến công tác làm lại, sửa chữa và sửa đổi các bảng mạch lắp ráp, bao gồm các dụng cụ và vật liệu, các quy trình chung, công tác loại bỏ lớp phủ và hình ảnh để hỗ trợ người dùng.
IPC/WHMA-A-620E 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC/WHMA-A-620E由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。
IPC/WHMA-A-620D là bộ tiêu chuẩn duy nhất được chấp thuận rộng rãi trong ngành công nhiệp cho Các Yêu Cầu và Tiêu Chuẩn Chấp Nhận của Các Bộ Dây Điện Cáp Điện. IPC/WHMA-A-620D mô tả các vật liệu, phương pháp, kiểm tra và các tiêu chuẩn chấp nhận để thực hiện các mối liên kết bằng phương pháp bấm, gia cố cơ học và hàn và các hoạt động lắp ráp liên quan đến cáp điện và bộ dây điện. IPC/WHMA-A-620D...
IPC/WHMA-A-620Dは、「ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準」に関する、業界合意による唯一の規格である。IPC/WHMA-A-620Dでは、ケーブルおよびハーネス組立品と関係する配線の圧着、機械的固定、およびはんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明する。 IPC/WHMA-A-620Dは、IPCおよびWire Harness Manufacturers Association (WHMA) (IPCの関連組織)によって開発された。 目次を見る。pdfファイル。
El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...
IPC/WHMA-A-620D est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620D décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...
IPC/WHMA-A-620D는 케이블 및 와이어 하네스 어셈블리의 요건과 및 허용 가능성에 대해 업계에서 유일하게 합의된 표준입니다. IPC/WHMA-A-620D는 크림핑된 기계적으로 고정되고 솔더링된 상호연결의 생산을 위한 물질, 방법, 테스트 및 허용 기준과 케이블 및 하네스 어셈블리와 관련된 조립 활동을 설명한다. IPC/WHMA-A-620D는 IPC와 WHMA(Wire Hanage Manufacturers Association)에 의해 개발되었다.
IPC/WHMA-A-620D 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC / WHMA-A-620D由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。 全文共420页。2020年1月开发。2020年5月翻译。
IPC/WHMA-A-620D ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620D beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
IPC/WHMA-A-620D is de enige consensusstandaard in de branche voor eisen en acceptatie van kabel- en kabelboomassemblages. IPC/WHMA-A-620D beschrijft materialen, methoden, tests en acceptatiecriteria voor het produceren van krimp-, mechanisch beveiligde en gesoldeerde verbindingen en de bijbehorende assemblageactiviteiten in verband met kabels en kabelbomen. IPC/WHMA-A-620D is ontwikkeld door IPC...
Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A.
이 가이드는 인쇄 보드 어셈블리들의 리웤, 수리 및 변경을 위한 절차들을 제공한다. 이 개정에 포함된 것은 통합된 예열기가 있는 초점이 맞는 IR 리플로우 시스템들 및 모든 다른 절차들에 대한 일반적인 최신으로 갱신된 사항들을 사용하는 BGAs에 대한 변경 사항 페이지들, 최신으로 갱신된 일반적인 정보 및 공통적인 절차들 섹션, 새로운 절차들로서 이전에 공개된 절차들이다. 색깔이 있는 삽화들이 많은 절차들에 포함된다. 300개 이상의 페이지들. 2017.01에 발간됨. 번역되었다
IPC/WHMA-A-620B on ainus juhtme- ja kaablikoostude vastavusnõudeid sisaldav tööstuse konsensuslik standard ning see on väljatöötatud IPC ja Wire Harness Manufacturers Association (WHMA). UUS! Standard sisaldab laialdasi nõudeid survevalule, vormivalule, juhtmete jätkamisele, ilma isolatsiooni toeta juhtme pressimisele, isolatsiooni eemalduseta ühendustele, pistikutele, monoliitsetele ja tinatatud...
Revizyon B, Kablo ve Kablo Takımlarının Kabul Gereklilikleri için endüstrinin ortak dökümanı olmayı sürdürmektedir. IPC ile Kablo Takımları Üreticileri Birliği (WHMA), bu önemli güncellemeyi geliştirmek için beraber çalışmışlardır. YENİ! Dolgu, kalıplı dolgu, ekleme, yalıtkan desteği olmayan krimp kontakları, sıralı yalıtkan yer değiştirme konnektörleri, konnektör bağlantısı, sert ve uyumlu kablo...
תאור זוהי המהדורה העדכנית ביותר של תקן מוסכם לתעשייה ודרישות קבלה של הרכבות כבלים ורתמות חוטים. תקן זה כולל סעיפים חדשים לאבטחת חיווט, אבטחת בידודים ומידע מעודכן ברבים מהסעיפים, יחד עם למעלה מ- 700 תמונות ואיורים. תקן זה מפרט חומרים שיטות בדיקות וקריטריוני קבלה לייצור בלחיצה, אבטחה מכאנית וחיבורים מולחמים להרכבות ופעולות הקשורות להרכבת כבלים וחיווט. IPC/WHMA-A-620C תוכנן על ידי IPC והאיגוד לייצור...
Az egyetlen ipari konszenzuson alapuló huzal és vezeték szerelvényekkel kapcsolatos követelményeket és elfogadási kritériumokat tartalmazó szabvány legújabb verziója. Új alfejezetekkel egészültek ki a biztosítóhuzallal, biztosítósodronnyal, tömítőgyűrűkkel és kábelcsatornákkal kapcsolatos részek és a szabvány számos fejezete frissítésre került. Több mint 700 fotóval és illusztrációval ez a...
Описание английско Стандарт IPC-7711/21B «Восстановление, модификация и ремонт электронных сборок» был полностью обновлен по каждой процедуре, чтобы обеспечить возможность их применения как для бессвинцовых, так и для традиционных оловянно-свинцовых электронных сборок. Это однотомное издание содержит все ранее опубликованные изменения и несколько новых процедур для компонентов BGA (включая...
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...
Niniejszy przewodnik dostarcza procedur dla wprowadzania poprawek, napraw i modyfikacji dla elektronicznych zespołów płyt drukowanych. W tej rewizji zawarte są procedury wcześniej opublikowane jako strony zmian, uaktualnione informacje ogólne i sekcja procedur wspólnych, nowe procedury dla BGA używające systemów rozpływu na skupioną podczerwień z integralnym podgrzewaniem oraz ogólnie uaktualnione...
Omschrijving in het Nederlands Deze handleiding bevat procedures voor rework, repair en modificatie van geassembleerde printplaten. Inbegrepen in deze revisie zijn de eerder uitgebrachte procedures met wijzigingspagina's, een bijgewerkte sectie van de algemene informatie en gemeenschappelijke procedures, nieuwe procedures voor BGA's met behulp van gerichte IR Reflow-systemen met geïntegreerde...
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...
Stor opdatering af blyfri support og forbedrede inspektionsvejledninger for reparationer og modifikationer! Denne vejledning omfatter alt, der er nødvendigt for reparation og rework af elektronikprodukter og printkort! IPC-7711B/7721B „Rework, modifikation og reparation af elektronikprodukter“ har komplette procedurer, som er blevet opdaterede for at sikre, at de er anvendelige til både blyfri og...
Download an update to published IPC-7711B/7721B Part 3 Procedure 6.1.(English only) Základni aktualizace pro bezolovnatou technologii a zlepšené návody pro kontrolu oprav a modifikací Tento návod obsahuje vše, čeho je zapotřebí pro opravy a přepracování elektronických sestav a desek plošných spojů! IPC 7711/7721 Přepracování,modifikace a opravy elektronických sestav prošla kompletní aktualizaci...
IPC-7711B/7721B rilavorazione, modifica e riparazione di assemblaggi elettronici un completo aggiornamento procedura per procedura al fine di garantirne l'applicabilità su entrambe le modalità di brasatura con Pb e senza Pb. Questo volume singolo include tutte le modifiche precedentemente pubblicate e diverse nuove procedure inerenti i BGA (compresi reballing) e la riparazione dei circuiti...
LEIRÁS Angol nyelvű leírás Ezen útmutató eljárásokat tartalmaz az elektronikai szerelvények újramunkálására, javítására ás módosítására. Ezen revízióban a korábbi szabványváltozat eljárásai, az általános információs és közös eljárási részek is frissítésre kerültek. Új eljárásként a szabvány kiegészült a beépített előfűtővel rendelkező fókuszált infravörös BGA forrasztási eljárással és az összes...
IPC/WHMA-A-620D-S space addendum provides additional requirements to IPC/WHMA-A-620D standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620D-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...
Ergänzung 1 zu IPC-7711/21C-DE, das Dokument enthält Verfahren für das Entfernen und Montieren von D-Pak-Komponenten.
Enmienda 1 al IPC-7711/21C, el documento proporciona los procedimientos para la extracción y la instalación de componentes D-Pak.
IPC-7711/21C的修订本1，本文件提供D-Pak元器件的去除和安装程序.
Amendement 1 à IPC-7711 / 21C fournit des procédures supplémentaires de retrait et d'installation
IPC/WHMA-A-620C-S provides additional requirements to IPC/WHMA-A-620C to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620C-S space addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620C.
When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision B, providing additional requirements to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required IPC training & certification...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards