Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-7711/21 - Revision B - Standard Only

Procedures are additions to the IPC-7711B/7721B

Document #:
IPC-7711/21
Revision
B
Product Type
Update
Released:  02/01/2013
Language
English
These procedures are additions to the IPC-7711B/7721B. Section 2: 3.11.1; 5.7.6; 5.8.1.1; 5.8.1.2; 5.8.1.3; Section 3: 4.7.4; 4.7.5; all released November 2011. Section 2: 5.5.7 released February 2013. The pages herein are authorized for download, reproduction, and printing for insertion into the IPC- 7711B/7721B. These procedures are not intended for previous versions of IPC-7711/7721
no-image-available

IPC-7711/21 - Revision C - Standard Only

Reparación, Modificación y Reparación de Ensambles Electrónicos

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  01/08/2018
Language
Spanish
Esta guía proporciona procedimientos de retrabajo, reparación y modificación de ensambles de tablero impreso. Incluídos en esta revisión son los procedimientos previamente lanzados como páginas con cambios, una información general actualizada y sección de procedimientos comunes, nuevos procedimientos de BGAs utilizando sistemas enfocados de reflujo de infrarrojos con precalentadores y...
no-image-available

IPC-7711/21 - Revision C - Standard Only

Nacharbeit, Änderung und Reparatur von elektronischen Baugruppen

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  11/28/2017
Language
German
Dieser Leitfaden enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen. In diese Ausgabe wurden die Verfahren integriert, die in die vorherige Ausgabe als Änderungsseiten aufgenommen wurden. Der Abschnitt Allgemeine Angaben und häufig angewendete Verfahren wurde aktualisiert. Neue Verfahren für BGAs wurden aufgenommen, die fokussierte IR-Reflow-Systeme mit...
no-image-available

IPC-7530 - Revision A - Standard Only

量産はんだ付プロセス( リフローおよびウェーブ) のための温度プロファイルガイドライン

Document #:
IPC-7530
Revision
A
Product Type
Standard Only
Released:  08/12/2022
Language
Japanese
本規格は、許容可能な電子組立品(SnPbおよびPbフリー)を製造するうえで必要となる熱プロファイルの作成において、有用かつ実用的な情報を提供するものである。今回の改版では、旧版でのリフロープロファイルから、ベーパーフェーズ、レーザー、セレクティブおよびウェーブソルダリングのプロファイルに至るまで対象範囲が拡大されている。また、プロファイル作成時に発生し得る一般的な不具合事象に対処するためのトラブルシューティングガイドをフルカラーで掲載している。
IPC-4552A CN Cover Image

IPC-4552 - Revision A - Standard Only

印制板化学镀镍/ 浸金（ENIG)镀覆性能规范

Document #:
IPC-4552
Revision
A
Product Type
Standard Only
Released:  12/08/2021
Language
Chinese
IPC-4552A 性能规范设定了对化学镀镍/沉金 (ENIG) 沉积厚度的要求，这些应用包括焊接、引线键合和作为接触表面处理。 IPC-4552A 旨在供化学品供应商、印制板制造商、电子制造服务 (EMS) 和原始设备制造商 (OEM) 使用。 除了 IPC-6010-FAM 印制板性能规范中的要求外，IPC-4552A 标准还可用于指定验收标准以满足性能要求。 使用本文件指定的 ENIG 沉积物将满足 J-STD-003 印制板可焊性规范中指定的最高涂层耐久性等级。 IPC-4552A 规范基于三个关键因素： ENIG 电镀工艺受到控制，产生镍和金沉积厚度的正态分布。 用于测量沉积物并因此控制过程的工具对于指定的厚度范围是准确和可重复的。 ENIG 电镀工艺可实现均匀的沉积特性。 如果不满足这三个关键因素中的任何一个，则生产的沉积物将不符合定义的性能标准。
no-image-available

IPC-7711/21 - Revision C - Standard Only

電子組件的返工、修改和維修

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  05/29/2020
Language
Chinese (Zhōngwén)
本指南提供了印刷電路板組件的返工，維修和修改程序。 本次修訂包括以前作為修訂本發布的程序，基本信息和通用程序部分的更新，使用具有預熱功能的聚焦紅外返工系統的BGA新程序，和所有其他程序的一般更新。許多規程包含彩色插圖。全文超過300頁。於2017年1月正式發布。2017年5月翻譯。
no-image-available

IPC-7711/21 - Revision C - Standard Only

Reprise, Modification et Réparation des Assemblages Électroniques

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  11/16/2018
Language
French
Ce guide fournit des procédures de reprise, réparation et modification d’assemblages de circuits imprimés. Cette révision inclut les changements de pages des procédures publiées précédemment, une mise à jour de la section information générale et procédures communes, de nouvelles procédures pour les BGAs utilisant des Systèmes de Refusion par IR focalisés avec préchauffe intégrale et des mises à...
no-image-available

IPC-A-620 - Revision B - Standard Only

Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây và Bộ Cáp Dẫn Điện

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  06/10/2015
Language
Vietnamese
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC/WHMA-A-620 - Revision C - Standard Only

Exigences et Critères d’Acceptabilité pour l’Interconnexion des Faisceaux de Fils et de Câbles

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/28/2017
Language
French
Ceci est la révision la plus récente de l’unique norme de consensus industriel sur les Exigences et Critères d’Acceptation pour l’Interconnexion des Faisceaux de Fils et de Câbles, et elle inclut de nouveaux chapitres sur le câblage de sécurité, les câbles de sécurité, les passe câbles et les chemins de câbles ainsi que des informations mises à jour dans de nombreux chapitres. Avec plus de 700...

IPC/WHMA-A-620 - Revision C - Standard Only

Requisitos y Aceptabilidad de Cables y Mazos de Cables

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  10/17/2017
Language
Spanish
Esta es la revisión más reciente del único estándar de consenso de la industria sobre los requisitos y la aceptabilidad de ensambles de cables y mazos de cables e incluye nuevas secciones sobre alambres de seguridad, cables de seguridad, pasamuros y bandejas junto a mucha más información actualizada en muchas secciones del libro. Con más de 700 fotos e ilustraciones, este estándar describe los...

IPC/JEDEC-J-STD-033 - Revision C - Standard Only

潮湿/再流焊敏感表面贴装器件的操作、包装、运输及使用

Document #:
IPC/JEDEC-J-STD-033
Revision
C
Product Type
Standard Only
Released:  02/26/2014
Language
Chinese
简要介绍 英文） 本文件的目的是，针对潮湿/再流焊敏感表面贴装器件，向生产商和用户提供标准的操作、包装、运输及使用方法。所提供的这些方法可避免由于吸收湿气和暴露在再流焊温度下造成的封装损伤，这些损伤会导致合格率和可靠性的降低。一旦正确执行，这些工艺可以提供从密封时间算起12个月的最短保质期。由IPC和JEDEC开发。共18页。2012年2月出版。2013年8月翻译。
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

線纜及線束組件的要求與驗收

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/24/2019
Language
Chinese (Zhōngwén)
本文件是唯一的，行業一致認可的線纜和線束組件的要求和驗收標準的最新版本，增加了鎖線，保險索，索環和線槽的新章節，並更新了許多章節的信息。該標準包含了700多張照片和插圖，描述了壓接，機械固定和焊接互連所用的材料，方法，測試和驗收標準以及與電纜和線束組件相關組裝活動。 IPC / WHMA-A-620C由IPC和線束製造商協會（WHMA）開發.2017年5月翻譯。

IPC-CC-830 - Revision B - Standard with Amendment 1

Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies

Document #:
IPC-CC-830
Revision
B
Product Type
Standard with amendment(s)
Released:  11/06/2008
Language
Chinese
This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

IPC/WHMA-A-620 - Revision C - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  02/18/2019
Language
Polish
Jest to najnowsza rewizja standardu branżowego dotyczącego wymagań i akceptacji dla montażu kabli i wiązek przewodów oraz zawiera nowe rozdziały dotyczące drutowania zabezpieczającego, linek zabezpieczających, przepustów kablowych, kanałów kablowych wraz z zaktualizowanymi informacjami w wielu pozostałych rozdziałach. Dzięki ponad 700 zdjęciom i ilustracjom standard ten opisuje materiały, metody...

IPC-A-620 - Revision A - Standard Only

Rev A superseded by Rev B

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  12/29/2008
Language
German
This is the German language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC/WHMA A-620 Revision A is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association teamed to develop this significant update, adding lead free acceptance criteria, a new...
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

线缆及线束组件的要求与验收

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  10/02/2017
Language
Chinese
本文件是唯一的、行业一致认可的线缆和线束组件的要求和验收标准的最新版本，增加了锁线、保险索、索环和线槽的新章节，并更新了许多章节的信息。该标准包含了700多张照片和插图，描述了压接、机械固定和焊接互连所用的材料、方法、测试和验收标准以及与电缆和线束组件相关组装活动。 IPC/WHMA-A-620C 由IPC和线束制造商协会（WHMA）开发。2017年5月翻译。

IPC/WHMA-A-620 - Revision A - Standard Only

线缆及线束组件的要求与验收

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  09/19/2007
Language
Chinese
This is the Chinese language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC/WHMA A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association teamed to develop this significant update, adding lead free acceptance criteria, a new chapter...
no-image-available

IPC-A-620 - Revision B - Standard Only

Exigences et critères d'acceptabilité pour l'interconnexion des faisceaux de fils et de câbles

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  04/16/2014
Language
French
La révision B demeure le seul standard industriel consensuel fournissant les exigences et les critères d'acceptabilité pour l'interconnexion des faisceaux de fils et de câbles. IPC et l'Association WHMA ont œuvré ensemble pour permettre l'élaboration et la mise à jour de ce standard. La nouvelle révision inclut des critères étendus concernant le moulage, la réalisation des épissures, le sertissage...
no-image-available

IPC/WHMA-A-620 - Revision A - Standard Only

Exigences et critères d’acceptation pour l’assemblage des câbles et faisceaux de câbles

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  10/15/2010
Language
French
Cette version prend en compte les exigences et les critères d’acceptabilité liés à l’utilisation d’alliages sans plomb. La révision A du standard industriel consensuel dénomé Critères d’Acceptation pour l’Assemblage de Câbles et de Faisceaux de câbles est désormais disponible. IPC et l’association Wire Harness Manufacturers Association (WHMA), ont collaboré pour développer de manière significative...

IPC/WHMA-A-620 - Revision C - Standard Only

Godkendelseskrav for kabler og for produkter med wire harness

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  11/01/2018
Language
Danish
Dette er den seneste revision af den eneste industristandard for ”Godkendelse for kabler og produkter med wire harness” og den inkluderer nye afsnit for sikringsledninger, sikringskabler, gennemføringsbøsninger og kabelbakker sammen med opdateret information på tværs af de mange afsnit. Med over 700 billeder og illustrationer beskriver denne standard materialer, metoder, test og...
no-image-available

IPC-A-620 - Revision B - Standard Only

Godkendelseskrav for kabler og for produkter med wire harness

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  06/27/2012
Language
Danish
Revision B er nu tilgængelig som den eneste industristandard for ”Godkendelseskrav for kabler og produkter med wire harness”. IPC og Wire Harness Manufacturers Association (WHMA) fortsætter samarbejdet med at udvikle denne væsentlige opdatering. NYT! Inkluderer udvidede kriterier for formstøbning, indstøbning, splejsning, crimpekontakter uden isolationsstøtte, IDC konnektorer, konnektering, rigid...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Requisitos y Aceptabilidad de Cables y Mazos de Cables

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  10/04/2013
Language
Spanish
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC/WHMA-A-620 - Revision A - Standard Only

Requerimientos y Aceptación para Ensamble de Arneses de Cable y Alambre

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  10/31/2007
Language
Spanish
This is the Spanish language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC/WHMA A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association teamed to develop this significant update, adding lead free acceptance criteria, a new chapter...
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây và Bộ Cáp Dẫn Điện

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  03/13/2019
Language
Vietnamese
Đây là phiên bản mới nhất của bộ tiêu chuẩn duy nhất được chấp thuận rộng rãi trong ngành công nghiệp cho Các Yêu Cầu và Tiêu Chuẩn Chấp Nhận của Cáp và Bộ Dây Dẫn Điện, và nó bao gồm các phần mới liên quan đến lắp đặt dây an toàn, cáp an toàn, đệm lót dây và máng cáp, kèm với thông tin cập nhật của nhiều mục khác. Với hơn 700 hình và minh họa, bộ tiêu chuẩn này mô tả các vật liệu, phương pháp...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  08/12/2014
Language
Polish
Rewizja B jest standardem stosowanym w przemyśle dotyczącym Wymagań i Akceptacji dla Montażu Kabli i Wiązek Przewodów. IPC i Stowarzyszenie Producentów Wiązek Przewodów (WHMA) pracowało razem w celu zaktualizowania niniejszego standard. NOWOŚĆ! Zawiera rozbudowane kryteria dla wtryskiwania, zalewania, splotów, połączeń zagniatanych, połączeń przewodów izolowanych, montażu złącza, sztywnych i...
401-425 of 469

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards