The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
Products
The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.
IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...
IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.
IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...
IPC-A-610 is the most widely used electronics assembly acceptance document. Updated with participants from 17 countries providing input and expertise, this document brings the latest criteria along with many new and revised graphics to the industry. This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed...
IPC-A-610F with Amendment 1 incorporates the requirements of IPC-A-610F and IPC-A-610F Amendment 1 into one document. Criteria are presented in a seamless IPC-A-610 format, and there are no redline marks. This document is the equivalent to using IPC-A-610F and IPC-A-610F Amendment 1. IPC brings this version to industry to minimize confusion for those using both documents and those wishing to...
IPC-A-610F Amendment 1 is now available. See Related items. IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610F illustrates industry-accepted workmanship criteria for electronics assemblies through detailed statements reflecting acceptable and defect conditions, supported by full-color photographs and...
IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610E illustrates industry-accepted workmanship criteria for electronics assemblies through full-color photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for...
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 Telecom Addendum Published August 2009. Download the Telecom Addendum. When specifically required by procurement documentation, this Addendum...
This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...
IPC-A-610H es la norma de aceptación de ensambles electrónicos más utilizada en la industria electrónica. La norma IPC-A-610H incluye una actualización general del documento, introduce varios nuevos tipos de componentes de montaje en superficie y elimina las condiciones ideales. Participantes de 29 países proporcionaron su apoyo y conocimientos especializados para traer este documento a la...
IPC-A-610H er den mest udbredte godkendelsesstandard for elektronikprodukter i elektronikindustrien. IPC-A-610H standarden inkluderer en generel opdatering af dokumentet, introducere flere nye overflademonterede komponenttyper og fjerner ”Ønskelig” tilstand. Deltagere fra 29 lande leverede deres input og ekspertise til at bringe dette dokument til elektronikindustrien. Dette er en ”skal have”...
IPC-A-610H je nejpoužívanější standard pro provádění přejímek elektronických sestav. Standard IPC-A-610H obsahuje obecnou aktualizaci dokumentu, představuje několik nových typů komponent pro povrchovou montáž, a odstraňuje cílové podmínky. Účastníci z 29 zemí poskytli své příspěvky a odborné znalosti, aby tento dokument přinesli elektronickému průmyslu.
Jde o nepostradatelnou příručku pro...
IPC-A-610H是电子行业广泛采用的电子组件验收标准。IPC-A-610H标准中包含了本文件的一般更新内容，介绍了一些新型表面贴装元器件，同时删除了目标条件。 本文件在电子行业成功问世离不开来自29个国家/地区的参与者，这些参与者在本文件编制期间投入了大量的精力并贡献了宝贵的专业知识。 该标准是检查人员、操作人员及其他与电子组件验收要求相关的人员必须掌握的技术标准。 与IPC-A-610一起制定的标准还有J-STD-001和IPC/WHMA-A-620。
IPC-A-610 is het meest gebruikte acceptatiedocument voor elektronica-assemblage. Bijgewerkt met deelnemers uit 17 landen die input en expertise leveren, brengt dit document de nieuwste criteria samen met veel nieuwe en herziene grafische afbeeldingen uit de industrie. Dit is een must-have voor inspecteurs, operators en anderen die geïnteresseerd zijn in de acceptatiecriteria voor elektronische...
IPC-A-610H는 전자 산업에서 가장 널리 사용되는 전자 어셈블리 허용 표준이다. IPC-A-610H 표준은 문서에 대한 일반 업데이트를 포함하며, 몇 가지 새로운 표면 실장 소자 유형을 도입하고 대상 조건을 제거한다. 29개국에서 온 참가자들은 이 문서를 전자 산업에 가져오기 위해 그들의 조언과 전문지식을 제공했다. 이는 전자 어셈블리의 허용 기준에 관심이 있는 검사자, 작업자 및 기타 사용자에게 반드시 필요한 사항이다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620과 함께 개발되었다.
Az IPC-A-610 a világon legszélesebb körben használt elektronikai szerelvényekkel foglalkozó szabvány. Az IPC-A-610H szabvány jó néhány dokumentum általános frissítését tartalmazza, számos új felületszerelt alkatrésztípus követelményeivel kiegészült és megszüntetésre került a cél állapot kritérium. A szabvány 29 országból beérkező újabb észrevételek, szakvélemények alapján biztosítja az...
IPC-A-610 là tiêu chuẩn chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Tiêu chuẩn IPC-A-610H bao gồm một cập nhận tổng quát, giới thiệu một số loại linh kiện SMT mới và loại bổ tình trạng mục tiêu. Những người tham gia từ 29 quốc gia cung cấp đầu vào và ý kiến chuyên môn để mang đến tài liệu này cho ngành công nghiệp điện tử. Đây là bộ tiêu chuẩn...
IPC-A-610H este cel mai folosit standard de acceptabilitate pentru asamblare electronice din industria electronică. Standardul IPC-A-610H include o actualizare generală a documentului, introduce mai multe tipuri noi de componente cu montare pe suprafață și elimină condițiile Obiectiv. Participanții din 29 de țări și-au adus contribuția și expertiza lor pentru a da acest document industriei...
IPC-A-610H เป็นมาตรฐานการยอมรับการประกอบอุปกรณ์อิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายมากที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ มาตรฐาน IPC-A-610H มีการอัพเดตทั่วไปในเอกสาร, แนะนำตัวอุปกรณ์ที่ติดตั้งบนพื้นผิวประเภทใหม่ๆ หลายประเภท และลบสภาวะเป้าหมายออกไป ผู้เข้าร่วมจาก 29 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปสู่อุตสาหกรรมอิเล็กทรอนิกส์ นี่เป็นสิ่งที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน...
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.
Описание на русском IPC-A-610 – наиболее широко используемый в мире стандарт по приемке электронных сборок. Этот документ, в усовершенствование которого внесли свой вклад участники из 17 стран, поделившись информацией и своими знаниями и опытом, предоставляет отрасли новейшие критерии наряду со множеством новых и обновленных иллюстраций. Этот документ – то, что обязательно нужно иметь контролерам...
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
IPC-A-610 är den mest använda standarden i världen för elektroniktillverkning och är ett måste för alla kvalitetssäkrings- och produktionsavdelningar. IPC-A-610F illustrerar industrigodkända acceptanskriterier för kretskort genom detaljerad text som beskriver tillstånd för acceptabelt och defekt, med stöd av fyrfärgsbilder och illustrationer. Denna revision inkluderar två nya typer av...
Der Leitfaden IPC-7711/21 enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen, einschließlich Werkzeugen und Materialien, häufig angewendete Verfahren, Entfernung der Beschichtung und Grafiken zur Unterstützung des Benutzers.
這份指南提供了對使用者有説明的印製板元件的返工，維修和修改程式，包含工具和材料，通用程式，塗敷的清除和圖形
このガイドは、プリント基板組立品のリワーク、リペアおよび改造の手順について紹介するものである。工具や材料、一般的な手順、コーティングの除去方法、およびユーザーの助けとなるようなグラフィック等が掲載されている
这份指南提供了对使用者有帮助的印制板组件的返工，维修和修改程序，包含工具和材料，通用程序，涂敷的清除和图形
คู่มือนี้ให้ขั้นตอนการทำซ้ำ ซ่อมแซม และดัดแปลงชุดประกอบแผงวงจรพิมพ์ รวมถึงเครื่องมือ วัสดุ ขั้นตอนทั่วไป การกำจัดสารเคลือบผิว และกราฟิกเพื่อช่วยเหลือผู้ใช้
Hướng dẫn này cung cấp các quy trình liên quan đến công tác làm lại, sửa chữa và sửa đổi các bảng mạch lắp ráp, bao gồm các dụng cụ và vật liệu, các quy trình chung, công tác loại bỏ lớp phủ và hình ảnh để hỗ trợ người dùng.
IPC-A-610 هي مواصفات قبول تجميع الإلكترونيات الأكثر شيوعا واستخدامًا. تم تحديثها مع مشاركين من 17 بلداً يقدمون مدخلات وخبرات ، حيث تقدم هذه الوثيقة أحدث المعايير إلى جانب العديد من الرسومات الجديدة والمعدلة للصناعة. هذه المواصفت تمثل مرجعا هاما ولا بد منه للمفتشين والعملة و كل من لهم مصلحة في معايير قبول التجميعات الإلكترونية. تم تطوير IPC-A-610 بالتآزر مع J-STD-001 ، وللمرة الأولى مع هذه المراجعة...
Kirjeldus IPC-A-610 on kõige levinum elektroonikakoostude vastavusnõudeid sisaldav dokument. Standardi uuendamisel on andnud oma sisendi tehniliste eriteadmiste näol osalejad seitsmeteistkümnest riigist. Dokumendis on toodud tööstuse uusimad kriteeriumid koos uute graafiliste materjalidega. See on kohustuslik dokument inspektoritele, operaatoritele ja kõigile teistele, kellel on huvi...
IPC-A-610 הינו תקן ההרכבות האלקטרוניות הנפוץ ביותר בעולם. בהיותו בגדר חובה עבור כל מחלקות הבטחת האיכות וההרכבה, IPC-A-610F מדגים קריטריוני מיומנות עבודה מקובלים בתעשיה עבור הרכבות אלקטרוניות, באמצעות תמונות ואיורים בצבע מלא. מהדורה זו כוללת שני סגנונות חדשים של חיבורי ,SMT כמו כן שינוי במילוי דרך קדחים וקריטריון לחלל ב- BGA . בנוסף, בכל מקום אפשרי ההגדרות שונו על מנת להפוך את הקריאה לקלה יותר וכדי...
IPC – A- 610 के समर्थन की प्रक्रिया IEC है जो इलेक्ट्रोनिक्स असेम्बली के लिए वैश्विक स्त्र पर अंतरराष्ट्रीय स्वीकार्य मानक है। IPC-A- 610 कार्य विश्व का सर्वाधिक उपयोग में लिया जाने वाला इलेक्ट्रोनिक्स असेम्बली मानक है। सबके लिए गुणवता का विश्वास व असेम्बली विभाग IPC– A- 610E जो पूर्ण रुप से रंगीन फोटोग्राफ व दृष्टांतो के द्वारा इलेक्ट्रोनिक्स असेम्बली के उध्योग द्वारा स्वीकृत कारीगरी के मानदण्डों...
This is the Finnish Language version of IPC-A-610D Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610D illustrates industry-accepted workmanship criteria for electronics assemblies through full-color...
L’IPC-A-610 è lo standard sugli assemblaggi elettronici maggiormente utilizzato a livello mondiale. Tale documento è stato sviluppato attraverso la partecipazione di esponenti di 17 paesi che hanno messo a disposizione la loro esperienza. IPC-A-610 ha un valore inestimabile per tutti gli operatori, gli ispettori e gli istruttori. IPC-A-610 è stato sviluppato in sinergia con IPC J-STD-001 e per la...
IPC-A-610 là tài liệu chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất. Được cập nhật với những người tham gia từ 17 quốc gia cung cấp đầu vào và ý kiến chuyên môn, tài liệu này mang đến các tiêu chuẩn mới nhất cùng với nhiều đồ họa mới và sửa đổi cho ngành công nghiệp. Đây là bộ tiêu chuẩn phải có đối với các nhân viên kiểm hàng, công nhân lắp ráp và những người khác có sự quan tâm...
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。
이 가이드는 인쇄 보드 어셈블리들의 리웤, 수리 및 변경을 위한 절차들을 제공한다. 이 개정에 포함된 것은 통합된 예열기가 있는 초점이 맞는 IR 리플로우 시스템들 및 모든 다른 절차들에 대한 일반적인 최신으로 갱신된 사항들을 사용하는 BGAs에 대한 변경 사항 페이지들, 최신으로 갱신된 일반적인 정보 및 공통적인 절차들 섹션, 새로운 절차들로서 이전에 공개된 절차들이다. 색깔이 있는 삽화들이 많은 절차들에 포함된다. 300개 이상의 페이지들. 2017.01에 발간됨. 번역되었다
Описание английско Стандарт IPC-7711/21B «Восстановление, модификация и ремонт электронных сборок» был полностью обновлен по каждой процедуре, чтобы обеспечить возможность их применения как для бессвинцовых, так и для традиционных оловянно-свинцовых электронных сборок. Это однотомное издание содержит все ранее опубликованные изменения и несколько новых процедур для компонентов BGA (включая...
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...
Niniejszy przewodnik dostarcza procedur dla wprowadzania poprawek, napraw i modyfikacji dla elektronicznych zespołów płyt drukowanych. W tej rewizji zawarte są procedury wcześniej opublikowane jako strony zmian, uaktualnione informacje ogólne i sekcja procedur wspólnych, nowe procedury dla BGA używające systemów rozpływu na skupioną podczerwień z integralnym podgrzewaniem oraz ogólnie uaktualnione...
Omschrijving in het Nederlands Deze handleiding bevat procedures voor rework, repair en modificatie van geassembleerde printplaten. Inbegrepen in deze revisie zijn de eerder uitgebrachte procedures met wijzigingspagina's, een bijgewerkte sectie van de algemene informatie en gemeenschappelijke procedures, nieuwe procedures voor BGA's met behulp van gerichte IR Reflow-systemen met geïntegreerde...
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...
Stor opdatering af blyfri support og forbedrede inspektionsvejledninger for reparationer og modifikationer! Denne vejledning omfatter alt, der er nødvendigt for reparation og rework af elektronikprodukter og printkort! IPC-7711B/7721B „Rework, modifikation og reparation af elektronikprodukter“ har komplette procedurer, som er blevet opdaterede for at sikre, at de er anvendelige til både blyfri og...
Download an update to published IPC-7711B/7721B Part 3 Procedure 6.1.(English only) Základni aktualizace pro bezolovnatou technologii a zlepšené návody pro kontrolu oprav a modifikací Tento návod obsahuje vše, čeho je zapotřebí pro opravy a přepracování elektronických sestav a desek plošných spojů! IPC 7711/7721 Přepracování,modifikace a opravy elektronických sestav prošla kompletní aktualizaci...
IPC-7711B/7721B rilavorazione, modifica e riparazione di assemblaggi elettronici un completo aggiornamento procedura per procedura al fine di garantirne l'applicabilità su entrambe le modalità di brasatura con Pb e senza Pb. Questo volume singolo include tutte le modifiche precedentemente pubblicate e diverse nuove procedure inerenti i BGA (compresi reballing) e la riparazione dei circuiti...
LEIRÁS Angol nyelvű leírás Ezen útmutató eljárásokat tartalmaz az elektronikai szerelvények újramunkálására, javítására ás módosítására. Ezen revízióban a korábbi szabványváltozat eljárásai, az általános információs és közös eljárási részek is frissítésre kerültek. Új eljárásként a szabvány kiegészült a beépített előfűtővel rendelkező fókuszált infravörös BGA forrasztási eljárással és az összes...
The IPC-A-610GC Telecom Addendum to IPC-A-610G Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision G by providing additional requirements to ensure that electrical and...
This Telecom Addendum to IPC-A-610F Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision F by providing additional requirements to ensure that electrical and electronic...
Telecom Addendum to IPC-A-610D Acceptability of Electronic Assemblies Telecom Addendum Published August 2009. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC-A-610, Revision D of February 2005 by providing additional requirements to ensure compliance to GR-78-CORE.
Ergänzung 1 zu IPC-7711/21C-DE, das Dokument enthält Verfahren für das Entfernen und Montieren von D-Pak-Komponenten.
Enmienda 1 al IPC-7711/21C, el documento proporciona los procedimientos para la extracción y la instalación de componentes D-Pak.
IPC-7711/21C的修订本1，本文件提供D-Pak元器件的去除和安装程序.
Amendement 1 à IPC-7711 / 21C fournit des procédures supplémentaires de retrait et d'installation
This is a redline document showing the changes from IPC-A-610F with Amendment 1 to IPC-A-610G. This document provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows the deleted/changed text in the IPC-A-610F with Amendment 1 pages and the new/revised text in purple highlights in the IPC-A-610G pages. Yellow pop-up boxes are also present in...
IPC-A-610 Revision E to Revision F Redline Comparison Document. This document is free to Task Group members participating in development of the standard and to Certification Centers with current training licenses for the associated Training and Certification program. CITs who are not members of the Task Group are encouraged to contact his or her MIT for a copy of the redline document.
Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...
This file shows significant changes in IPC-A-610 from Revision D to Revision E.
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
当采购文件特别要求对电子产品IPC-A-610G可接受性的IPC-A-610GC电信附录时，对电信产品提出了特定要求。本文档中的信息通过提供其他要求来确保电气和电子组件满足要求符合GE-78-CORE的客户的要求，从而补充或替代了IPC-A-610修订版G专门确定的要求
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。
This is a redline document showing the changes from IPC-7711/21B to IPC-7711/21C. This 790+ page document provides a side-by-side comparison of the two documents and includes the figures. The document shows the deleted/changed text in the IPC-7711/21B pages and the new/revised text in purple highlights in the IPC-7711/21C pages. Yellow pop-up boxes are also present in the IPC-7711/21C pages to...
IPC-A-610H ist die in der Elektronik-Branche weltweit am meisten verwendete Abnahme-Richtlinie für Elektronikbaugruppen. Die IPC-A-610H-Richtlinie beinhaltet eine allgemeine Aktualisierung des Dokuments, führt mehrere neue oberflächenmontierbare Bauteiltypen ein und entfernt die Kategorie „Anzustreben“ bei den Bewertungen. Teilnehmer aus 29 Ländern haben ihre Beiträge und ihr Fachwissen...
L’IPC-A-610H est le référentiel d’acceptabilité des assemblages électroniques la plus couramment utilisée dans l’industrie électronique. Le référentiel IPC-A-610H comprend une mise à jour générale du document, présente plusieurs nouveaux types de composants montés en surface et supprime les conditions d’objectif. Les participants de 29 pays ont apporté leur contribution et leur expertise pour...
תיאור IPC-A-610Hהוא תקן הקבלה להרכבת אלקטרוניקה הנפוץ ביותר בתעשיית האלקטרוניקה. תקן IPC-A-610H כולל עדכון כללי למסמך, מציג מספר סוגי רכיבי הרכבה חדשים על פני השטח ומסיר תנאי יעד. משתתפים מ-29 מדינות סיפקו את הקלט והמומחיות שלהם כדי להביא מסמך זה לתעשיית האלקטרוניקה. זו חובה עבור מבקרים, מפעילים ואחרים שלהם עניין בקריטריוני הקבלה עבור הרכבות אלקטרוניות. IPC-A-610 פותח בסינרגיה עם J-STD-001 ו- IPC...
IPC-A-610H是電子行業廣泛採用的電子組件驗收標準。IPC-A-610H標準中包含了本檔的一般更新內容，介紹了一些新型表面貼裝元器件，同時刪除了目標條件。 本檔在電子行業成功問世離不開來自29個國家/地區的參與者，這些參與者在本檔編制期間投入了大量的精力並貢獻了寶貴的專業知識。 該標準是檢查人員、操作人員及其他與電子組件驗收要求相關的人員必須掌握的技術標準。 與IPC-A-610一起制定的標準還有J-STD-001和IPC/WHMA-A-620。
IPC-A-610Hは、エレクトロニクス業界で最も広く使用されている電子組立品の受入れの規格である。IPC-A-610Hでは、文書への一般的な更新内容、および新規に採用された表面実装部品のタイプが含まれており、また、この改版からは「目標とするコンディション(状態)」は削除されている。 この改版にあたっては29か国からの参加者から情報と専門知識が寄せられ、最新の基準を業界に提供している。 本書は、電子組立品の受入れ基準に関心のある検査員、オペレータおよび関係者にとって必須の文書といえる。 IPC-A-610は、J-STD-001およびIPC/WHMA-A-620との相乗作用のもと開発されたものである。
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
IEC är på väg att godkänna IPC-A-610 som den globala rekommenderade internationella standarden för elektroniktillverkning. IPC-A-610 är den mest använda standarden i världen för elektroniktillverkning. IPC-A-610E är ett måste för alla kvalitetssäkrings- och produktionsavdelningar och illustrerar industrigodkända acceptanskriterier genom fyrfärgsbilder och illustrationer. Områden inkluderar...
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
IPC-A-610 jest najpowszechniej na świecie używanym standardem dla pakietów elektronicznych. Uaktualniany przez uczestników z 17 krajów dostarczających wkładu i ekspertyz, niniejszy dokument dostarcza przemysłowi najnowszych kryteriów wraz z wieloma nowymi i ulepszonymi grafikami. Jest to nieoceniony dokument dla inspektorów, operatorów i innych zainteresowanych kryteriami dopuszczalności zespołów...
This is the Czech Language version of IPC-A-610D Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610D illustrates industry-accepted workmanship criteria for electronics assemblies through full-color...
IEC正在签署将IPC-A-610作为全球首选的电子组装国际验收标准的文件。 IPC-A-610是全球应用最广泛的电子组装标准。作为所有质量保证和组装部门的必备文件，它通过彩色图片和示意图图示了业界公认的工艺要求。主要内容包括挠性电路的连接、母子板、部件叠装、无铅、通孔元器件朝向和焊接要求、SMT（新端子类型）和分立布线组件、机械组装、清洗、标记、涂覆层和层压板要求。 对于所有检验人员、操作人员和培训员，IPC-A-610是一个无价之宝。E版本共有809张关于可接受性要求的图片和示意图，其中165张为新增或修订的。最新版本的清晰性和准确度经过了认真地审查。本文件中的一些要求已与业界一致同意的其他文件的相关要求同步，可与材料和工艺标准IPC J-STD-001配套使用。 下载IPC-A-610E版本相对于D版本的主要修订变化文件，本文件为PDF文件（只有英文版）。
Die IPC-A-610 befindet sich im Anerkennungsverfahren durch die IEC (International Electrotechnical Commision) als weltweit bevorzugter und international anerkannter Standard für elektronische Baugruppen. IPC-A-610 ist der meist benutzte Standard für elektronische Baugruppen weltweit. IPC-A-610E zeigt die von der Industrie akzeptierten Kriterien für die Verarbeitungsgüte von elektronischen...
This is the German Language version of IPC-A-610D Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610D illustrates industry-accepted workmanship criteria for electronics assemblies through full-color...
IPC-A-610 ist die weltweit am meisten verwendete Abnahme-Richtlinie zur Elektronik-Montage. Aktualisiert durch das Fachwissen von Experten aus 17 Ländern, bietet dieses Dokument der Branche aktuellste Kriterien und neue bzw. aktualisierte Illustrationen. Es ist ein absolutes Muss für Prüfer, Montagemitarbeiter und Andere, die ein Interesse an Abnahmekriterien für elektronische Baugruppen haben...
IPC-A-610 ist die weltweit am meisten verwendete Richtlinie zur Elektronik-Montage. Die IPC-A-610F, ein Muss für alle Qualitätssicherungs- und Montageabteilungen, illustriert anerkannte Abnahmekriterien für die Verarbeitungsqualität elektronischer Baugruppen. Sie enthält detaillierte Angaben über sowohl zulässige Zustände als auch Fehlerzustände und wird durch farbige Bilder und Illustrationen...
IPC-A-610 je nejpoužívanější dokument pro provádění přejímek elektronických sestav. Aktualizován účastníky ze 17 zemí zajišťuje poznatky a expertizu. Tento dokument přináší průmyslu nejnovější kritéria spolu s mnoha novými a revidovanými ilustracemi Jde o nutno příručku pro kontrolory, operátory a další pracovníky, kterých se týkají kritéria přijatelnosti elektronických sestav. IPC-A-610 je...
IEC pracuje na uznání standardu IPC-A-610 jako celosvětově doporučené normy pro přejímky elektronických sestav. IPC-A-610 je celosvětově nejpoužívanější standard pro montáž elektronických sestav. Je nezbytný pro zajištění kvality a montáže, IPC-A-610E názorně objasňuje kritéria přijatelnosti elektronických sestav prostřednictvím barevných fotografií a ilustrací. Témata zahrnují ohebná připojení...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards