The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
Products
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
IPC-4552B standard sets the requirements for Electroless Nickel / Immersion Gold (ENIG) deposit thickness for applications including soldering, wire bonding, and as a contact finish. IPC-4552B standard is used to specify acceptance criteria to meet performance standards for IPC-6010 family of documents including IPC-6012, IPC-6013 and IPC-6018. The ENIG deposit specified using this document will...
Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.
The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.
The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.
IPC-4556A Standard sets the requirements for the use of Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) as a surface finish for printed boards. IPC-4556A standard defines ENEPIG deposit thicknesses for applications including soldering, wire bonding, and as a contact finish.
This specification sets requirements based on performance criteria for the use of Immersion Silver (IAg) as a surface finish for printed circuit boards. It is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) companies and original equipment manufacturers (OEM). IAg is a thin immersion deposit over copper. It is a multifunctional surface...
This standard establishes the requirements for timely customer notification of changes to electronic products and associated processes.
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...
The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...
IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.
IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...
IPC-A-610 is the most widely used electronics assembly acceptance document. Updated with participants from 17 countries providing input and expertise, this document brings the latest criteria along with many new and revised graphics to the industry. This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed...
IPC-A-610F with Amendment 1 incorporates the requirements of IPC-A-610F and IPC-A-610F Amendment 1 into one document. Criteria are presented in a seamless IPC-A-610 format, and there are no redline marks. This document is the equivalent to using IPC-A-610F and IPC-A-610F Amendment 1. IPC brings this version to industry to minimize confusion for those using both documents and those wishing to...
Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...
Tackling PCB cleanliness is a tough job; residues on printed circuit boards are directly related to the reliability of the produced hardware and can result in serious failures if not known or monitored. But how do you measure "cleanliness"? How clean is "clean"? The IPC-5701 provides guidance into how these issues should be approached and specified in purchasing documents, addressing levels of...
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...
The IPC-4555 standard covers the requirements and testing for organic solderability preservatives (OSP) processes for printed boards to be used primarily for electrical and electronic circuits. Details for lead free soldering are covered in IPC-4555
IPC-A-610F Amendment 1 is now available. See Related items. IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610F illustrates industry-accepted workmanship criteria for electronics assemblies through detailed statements reflecting acceptable and defect conditions, supported by full-color photographs and...
IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610E illustrates industry-accepted workmanship criteria for electronics assemblies through full-color photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for...
The European Union’s Restriction of Hazardous Substances (RoHS) legislation has had a profound impact on the electronics industry. One of the restricted substances, lead (Pb), is commonly used in alloys with tin for component finishes, printed board finishes and solders. Pb-free materials directly affect product performance, reliability and service life in many ways. There have been numerous...
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 Telecom Addendum Published August 2009. Download the Telecom Addendum. When specifically required by procurement documentation, this Addendum...
This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
The IPC-4552A performance specification sets requirements for Electroless Nickel/Immersion Gold (ENIG) deposit thicknesses for applications including soldering, wire bonding and as a contact finish. The IPC-4552A is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) and original equipment manufacturers (OEM). The IPC-4552A standard may be...
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...
IPC-A-610H es la norma de aceptación de ensambles electrónicos más utilizada en la industria electrónica. La norma IPC-A-610H incluye una actualización general del documento, introduce varios nuevos tipos de componentes de montaje en superficie y elimina las condiciones ideales. Participantes de 29 países proporcionaron su apoyo y conocimientos especializados para traer este documento a la...
IPC-A-610H er den mest udbredte godkendelsesstandard for elektronikprodukter i elektronikindustrien. IPC-A-610H standarden inkluderer en generel opdatering af dokumentet, introducere flere nye overflademonterede komponenttyper og fjerner ”Ønskelig” tilstand. Deltagere fra 29 lande leverede deres input og ekspertise til at bringe dette dokument til elektronikindustrien. Dette er en ”skal have”...
IPC-4554, "Specification for Immersion Tin Plating for Printed Circuit Boards," is the third document in a series of specifications [the first two are: IPC-4552 which addresses electroless nickel/immersion gold (ENIG) and IPC-4553 which addresses immersion silver (IAg)] that set the requirements for printed circuit board surface finishes that are alternates to eutectic tin-lead. IPC-4554, a full...
IPC-A-610H je nejpoužívanější standard pro provádění přejímek elektronických sestav. Standard IPC-A-610H obsahuje obecnou aktualizaci dokumentu, představuje několik nových typů komponent pro povrchovou montáž, a odstraňuje cílové podmínky. Účastníci z 29 zemí poskytli své příspěvky a odborné znalosti, aby tento dokument přinesli elektronickému průmyslu.
Jde o nepostradatelnou příručku pro...
IPC-A-610H是电子行业广泛采用的电子组件验收标准。IPC-A-610H标准中包含了本文件的一般更新内容，介绍了一些新型表面贴装元器件，同时删除了目标条件。 本文件在电子行业成功问世离不开来自29个国家/地区的参与者，这些参与者在本文件编制期间投入了大量的精力并贡献了宝贵的专业知识。 该标准是检查人员、操作人员及其他与电子组件验收要求相关的人员必须掌握的技术标准。 与IPC-A-610一起制定的标准还有J-STD-001和IPC/WHMA-A-620。
IPC-A-610 is het meest gebruikte acceptatiedocument voor elektronica-assemblage. Bijgewerkt met deelnemers uit 17 landen die input en expertise leveren, brengt dit document de nieuwste criteria samen met veel nieuwe en herziene grafische afbeeldingen uit de industrie. Dit is een must-have voor inspecteurs, operators en anderen die geïnteresseerd zijn in de acceptatiecriteria voor elektronische...
IPC-A-610H는 전자 산업에서 가장 널리 사용되는 전자 어셈블리 허용 표준이다. IPC-A-610H 표준은 문서에 대한 일반 업데이트를 포함하며, 몇 가지 새로운 표면 실장 소자 유형을 도입하고 대상 조건을 제거한다. 29개국에서 온 참가자들은 이 문서를 전자 산업에 가져오기 위해 그들의 조언과 전문지식을 제공했다. 이는 전자 어셈블리의 허용 기준에 관심이 있는 검사자, 작업자 및 기타 사용자에게 반드시 필요한 사항이다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620과 함께 개발되었다.
Az IPC-A-610 a világon legszélesebb körben használt elektronikai szerelvényekkel foglalkozó szabvány. Az IPC-A-610H szabvány jó néhány dokumentum általános frissítését tartalmazza, számos új felületszerelt alkatrésztípus követelményeivel kiegészült és megszüntetésre került a cél állapot kritérium. A szabvány 29 országból beérkező újabb észrevételek, szakvélemények alapján biztosítja az...
IPC-A-610 là tiêu chuẩn chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Tiêu chuẩn IPC-A-610H bao gồm một cập nhận tổng quát, giới thiệu một số loại linh kiện SMT mới và loại bổ tình trạng mục tiêu. Những người tham gia từ 29 quốc gia cung cấp đầu vào và ý kiến chuyên môn để mang đến tài liệu này cho ngành công nghiệp điện tử. Đây là bộ tiêu chuẩn...
IPC-A-610H este cel mai folosit standard de acceptabilitate pentru asamblare electronice din industria electronică. Standardul IPC-A-610H include o actualizare generală a documentului, introduce mai multe tipuri noi de componente cu montare pe suprafață și elimină condițiile Obiectiv. Participanții din 29 de țări și-au adus contribuția și expertiza lor pentru a da acest document industriei...
IPC-A-610H เป็นมาตรฐานการยอมรับการประกอบอุปกรณ์อิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายมากที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ มาตรฐาน IPC-A-610H มีการอัพเดตทั่วไปในเอกสาร, แนะนำตัวอุปกรณ์ที่ติดตั้งบนพื้นผิวประเภทใหม่ๆ หลายประเภท และลบสภาวะเป้าหมายออกไป ผู้เข้าร่วมจาก 29 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปสู่อุตสาหกรรมอิเล็กทรอนิกส์ นี่เป็นสิ่งที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน...
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.
Описание на русском IPC-A-610 – наиболее широко используемый в мире стандарт по приемке электронных сборок. Этот документ, в усовершенствование которого внесли свой вклад участники из 17 стран, поделившись информацией и своими знаниями и опытом, предоставляет отрасли новейшие критерии наряду со множеством новых и обновленных иллюстраций. Этот документ – то, что обязательно нужно иметь контролерам...
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
IPC-A-610 är den mest använda standarden i världen för elektroniktillverkning och är ett måste för alla kvalitetssäkrings- och produktionsavdelningar. IPC-A-610F illustrerar industrigodkända acceptanskriterier för kretskort genom detaljerad text som beskriver tillstånd för acceptabelt och defekt, med stöd av fyrfärgsbilder och illustrationer. Denna revision inkluderar två nya typer av...
Der Leitfaden IPC-7711/21 enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen, einschließlich Werkzeugen und Materialien, häufig angewendete Verfahren, Entfernung der Beschichtung und Grafiken zur Unterstützung des Benutzers.
這份指南提供了對使用者有説明的印製板元件的返工，維修和修改程式，包含工具和材料，通用程式，塗敷的清除和圖形
このガイドは、プリント基板組立品のリワーク、リペアおよび改造の手順について紹介するものである。工具や材料、一般的な手順、コーティングの除去方法、およびユーザーの助けとなるようなグラフィック等が掲載されている
这份指南提供了对使用者有帮助的印制板组件的返工，维修和修改程序，包含工具和材料，通用程序，涂敷的清除和图形
คู่มือนี้ให้ขั้นตอนการทำซ้ำ ซ่อมแซม และดัดแปลงชุดประกอบแผงวงจรพิมพ์ รวมถึงเครื่องมือ วัสดุ ขั้นตอนทั่วไป การกำจัดสารเคลือบผิว และกราฟิกเพื่อช่วยเหลือผู้ใช้
Hướng dẫn này cung cấp các quy trình liên quan đến công tác làm lại, sửa chữa và sửa đổi các bảng mạch lắp ráp, bao gồm các dụng cụ và vật liệu, các quy trình chung, công tác loại bỏ lớp phủ và hình ảnh để hỗ trợ người dùng.
IPC-A-610 هي مواصفات قبول تجميع الإلكترونيات الأكثر شيوعا واستخدامًا. تم تحديثها مع مشاركين من 17 بلداً يقدمون مدخلات وخبرات ، حيث تقدم هذه الوثيقة أحدث المعايير إلى جانب العديد من الرسومات الجديدة والمعدلة للصناعة. هذه المواصفت تمثل مرجعا هاما ولا بد منه للمفتشين والعملة و كل من لهم مصلحة في معايير قبول التجميعات الإلكترونية. تم تطوير IPC-A-610 بالتآزر مع J-STD-001 ، وللمرة الأولى مع هذه المراجعة...
Kirjeldus IPC-A-610 on kõige levinum elektroonikakoostude vastavusnõudeid sisaldav dokument. Standardi uuendamisel on andnud oma sisendi tehniliste eriteadmiste näol osalejad seitsmeteistkümnest riigist. Dokumendis on toodud tööstuse uusimad kriteeriumid koos uute graafiliste materjalidega. See on kohustuslik dokument inspektoritele, operaatoritele ja kõigile teistele, kellel on huvi...
IPC-A-610 הינו תקן ההרכבות האלקטרוניות הנפוץ ביותר בעולם. בהיותו בגדר חובה עבור כל מחלקות הבטחת האיכות וההרכבה, IPC-A-610F מדגים קריטריוני מיומנות עבודה מקובלים בתעשיה עבור הרכבות אלקטרוניות, באמצעות תמונות ואיורים בצבע מלא. מהדורה זו כוללת שני סגנונות חדשים של חיבורי ,SMT כמו כן שינוי במילוי דרך קדחים וקריטריון לחלל ב- BGA . בנוסף, בכל מקום אפשרי ההגדרות שונו על מנת להפוך את הקריאה לקלה יותר וכדי...
IPC – A- 610 के समर्थन की प्रक्रिया IEC है जो इलेक्ट्रोनिक्स असेम्बली के लिए वैश्विक स्त्र पर अंतरराष्ट्रीय स्वीकार्य मानक है। IPC-A- 610 कार्य विश्व का सर्वाधिक उपयोग में लिया जाने वाला इलेक्ट्रोनिक्स असेम्बली मानक है। सबके लिए गुणवता का विश्वास व असेम्बली विभाग IPC– A- 610E जो पूर्ण रुप से रंगीन फोटोग्राफ व दृष्टांतो के द्वारा इलेक्ट्रोनिक्स असेम्बली के उध्योग द्वारा स्वीकृत कारीगरी के मानदण्डों...
This is the Finnish Language version of IPC-A-610D Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610D illustrates industry-accepted workmanship criteria for electronics assemblies through full-color...
L’IPC-A-610 è lo standard sugli assemblaggi elettronici maggiormente utilizzato a livello mondiale. Tale documento è stato sviluppato attraverso la partecipazione di esponenti di 17 paesi che hanno messo a disposizione la loro esperienza. IPC-A-610 ha un valore inestimabile per tutti gli operatori, gli ispettori e gli istruttori. IPC-A-610 è stato sviluppato in sinergia con IPC J-STD-001 e per la...
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻
IPC-A-610 là tài liệu chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất. Được cập nhật với những người tham gia từ 17 quốc gia cung cấp đầu vào và ý kiến chuyên môn, tài liệu này mang đến các tiêu chuẩn mới nhất cùng với nhiều đồ họa mới và sửa đổi cho ngành công nghiệp. Đây là bộ tiêu chuẩn phải có đối với các nhân viên kiểm hàng, công nhân lắp ráp và những người khác có sự quan tâm...
IPC-CC-830B prescribes qualification and performance requirements of conformal coatings. Amendment 1 provides updated requirements for moisture and insulation resistance and temperature and humidity aging and additional information on coating classifications.
この性能仕様書は、はんだ付、ワイヤーボンディングおよび接点の仕上げ等の用途における無電解ニッケル/置換金(ENIG)めっきの析出厚さに関する要件を定めるものである。 本規格書では、IPC-6010文書群(IPC-6012、IPC-6013、IPC-6018等)に記載する性能基準に適合するための、基板の受入れ/許容基準について規定する。 本書で指定するENIGの析出物は、IPC-J-STD-003のプリント基板のはんだ付性仕様に規定される最上位のコーティング耐久性等級に適合するものである。
材料の適合性を検証するにあたり、業界では種々のテストビークルが存在し活用されている。IPC-B-52試験基板は実生産で用いられる材料と工程を具体的に表現したものであり、イオンクロマトグラフと表面絶縁抵抗(SIR)の両試験のニーズを満たすテストビークルである。IPC-9203Aに示す規格はIPC-B-52テストビークルに対応し、製造工程の評価や、選択した製造材料セットと工程が清浄度の観点から適合しているという客観的証拠を提供する場合に利用できる。またIPC-9203Aに示すユーザーガイドラインはIPC-9202の手引き文書として作成されており、製造者が材料と工程の適合性を実証する場合の規定「～することが望ましい」と「～すること(する必要がある)」という点について明確に提示している。
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
表面絶縁抵抗(SIR)試験は、生産工程(ソルダマスク、はんだ付用フラックス、コンフォーマルコーティングなど)の特性評価試験のみならず、電子組立品の生産工程の各段階における電気化学反応の試験にも用いられるツールである。このハンドブックでは温度/湿度(TH)試験や温度/湿度/バイアス(THB)試験を含むSIR試験について、その専門用語、理論、試験手順、テストビークルに焦点をあて記述している。また、故障モードやトラブルシューティングに関する考察についても述べている。なお改版Aでは、SIRに利用できるテストビークル(業界で開発されたもの)、およびチャンバーのセットアップに関する考察を大幅に拡大して記載している。86ページ。2007年8月発行
概説 本書、IPC-9202A「材料・工程の特性評価/認定試験の方法」は、プリント回路組立品(PCA)の代表的なサンプル上の表面絶縁抵抗(SIR)の変化を記録するものである。この試験は、はんだ付後に外層に残るはんだ由来のフラックスまたはその他の工程残さが原因で不要な電気化学的反応を引き起こし、信頼性に重大な影響を及ぼす可能性について定量化するものである。 この試験では、実際の生産工程において電子回路の代表的なものとなるような基板をテストビークルとして使用する。これは、定量的かつ定性的なデータの両方を得ることができる試験である。 IPC-9202Aに紹介する試験は、提案された製造工程や工程変更を用いた場合に、生産するハードウェア(製品)の最終的な性能が電気化学的リスクに対し許容可能であるということを示すための「工程認定」用として使用することができる。工程変更には組立工程の手順...
本性能规范为化学镀镍 / 浸金（ENIG）在包括焊接、金属线键合和作为一种接触表面的应用设置了相应的沉积厚度要求。适用于化学药水供应商、印制板制造商、电子制造服务业（EMS）和原始设备制造商（OEM）。本标准可用于除了那些符合 IPC-6010 系列（IPC-6012、IPC-6013 和 IPC-6018）标准性能要求外的指定的验收标准。使用本规范规定的化学镀镍 / 浸金（ENIG）沉积层也满足 J-STD-003 印制电路板的可焊性规范中涂层耐久性的最高等级要求。
本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。
規格「IPC-CC-830C」は、電気絶縁化合物 (コンフォーマルコーティング) の認定および適合要件について確立するものである。これは、最小限の冗長テストで材料の最大の信頼性を得ることを目的として、設計および構築されてきたものである。規格「IPC-CC-830C」は次の項目を対象とする： フォーマルコーティング剤の認定および認定の維持 (表3-1、コラムAおよびB)。 コンフォーマルコーティング剤の特性に関する品質適合性 (表3-1、コラムC)。 本規格においてコンフォーマルコーティングという用語は、プリント配線板組立に使用される保護コーティングのタイプを指す場合に用いられる。コンフォーマルコーティングは単に機械的な支持をもたらすものではなく、湿気および汚染から基板を保護し、電気絶縁を付与することを目的としている。
简要介绍 英文） 本规范基于性能标准规定了使用浸银作为印制板表面处理的要求。本规范适用于化学药水供应商、印制板制造商、电子制造服务业（EMS）、原始设备制造商（OEM）。浸银是在铜面上沉积一层薄的银。它是一种多功能的表面处理，适用于焊接。也可应用在一些挤入式接触和表面接触。它适合打铝线。浸银保护下面的铜面免受氧化，以超过预期的保存期限。暴露在湿气和诸如硫和氯的空气污染物中，可能给沉积层的使用寿命带来负面影响。这个影响可能会从轻微的变色到焊盘完全的变黑。适当的包装是必需的。注意：本标准，同时建立了对应位置上的单点厚度范围及浸银厚度的上限。共36页。2009年5月发布。2013年4月翻译。
이 가이드는 인쇄 보드 어셈블리들의 리웤, 수리 및 변경을 위한 절차들을 제공한다. 이 개정에 포함된 것은 통합된 예열기가 있는 초점이 맞는 IR 리플로우 시스템들 및 모든 다른 절차들에 대한 일반적인 최신으로 갱신된 사항들을 사용하는 BGAs에 대한 변경 사항 페이지들, 최신으로 갱신된 일반적인 정보 및 공통적인 절차들 섹션, 새로운 절차들로서 이전에 공개된 절차들이다. 색깔이 있는 삽화들이 많은 절차들에 포함된다. 300개 이상의 페이지들. 2017.01에 발간됨. 번역되었다
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
Описание английско Стандарт IPC-7711/21B «Восстановление, модификация и ремонт электронных сборок» был полностью обновлен по каждой процедуре, чтобы обеспечить возможность их применения как для бессвинцовых, так и для традиционных оловянно-свинцовых электронных сборок. Это однотомное издание содержит все ранее опубликованные изменения и несколько новых процедур для компонентов BGA (включая...
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...
Niniejszy przewodnik dostarcza procedur dla wprowadzania poprawek, napraw i modyfikacji dla elektronicznych zespołów płyt drukowanych. W tej rewizji zawarte są procedury wcześniej opublikowane jako strony zmian, uaktualnione informacje ogólne i sekcja procedur wspólnych, nowe procedury dla BGA używające systemów rozpływu na skupioną podczerwień z integralnym podgrzewaniem oraz ogólnie uaktualnione...
Omschrijving in het Nederlands Deze handleiding bevat procedures voor rework, repair en modificatie van geassembleerde printplaten. Inbegrepen in deze revisie zijn de eerder uitgebrachte procedures met wijzigingspagina's, een bijgewerkte sectie van de algemene informatie en gemeenschappelijke procedures, nieuwe procedures voor BGA's met behulp van gerichte IR Reflow-systemen met geïntegreerde...
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...
Stor opdatering af blyfri support og forbedrede inspektionsvejledninger for reparationer og modifikationer! Denne vejledning omfatter alt, der er nødvendigt for reparation og rework af elektronikprodukter og printkort! IPC-7711B/7721B „Rework, modifikation og reparation af elektronikprodukter“ har komplette procedurer, som er blevet opdaterede for at sikre, at de er anvendelige til både blyfri og...
Download an update to published IPC-7711B/7721B Part 3 Procedure 6.1.(English only) Základni aktualizace pro bezolovnatou technologii a zlepšené návody pro kontrolu oprav a modifikací Tento návod obsahuje vše, čeho je zapotřebí pro opravy a přepracování elektronických sestav a desek plošných spojů! IPC 7711/7721 Přepracování,modifikace a opravy elektronických sestav prošla kompletní aktualizaci...
IPC-7711B/7721B rilavorazione, modifica e riparazione di assemblaggi elettronici un completo aggiornamento procedura per procedura al fine di garantirne l'applicabilità su entrambe le modalità di brasatura con Pb e senza Pb. Questo volume singolo include tutte le modifiche precedentemente pubblicate e diverse nuove procedure inerenti i BGA (compresi reballing) e la riparazione dei circuiti...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards