Standards

Your results

Products

Document #:

IPC-2223

Revision

Product Type

Standard Only

Released: 01/24/2020

Language

English

Current Revision

IPC-2223E used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. IPC-2223E provides new design...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 01/29/2026

Language

English

Current Revision

This standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 11/01/2023

Language

English

Current Revision

IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 07/09/2019

Language

English

Current Revision

The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

Document #:

IPC-D-350

Revision

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

This document bears two reference numbers, and may be obtained from IPC or the IEC. IPC-D-350D and IEC 1182-1 are identical in technical content. The IEC version of this document also contains a French translation. The IEC is responsible for the accuracy of that translation.Specifies record formats used to describe printed board products with detail sufficient for tooling, manufacturing and...

Document #:

IPC-1602

Revision

Product Type

Standard Only

Released: 12/17/2024

Language

English

Current Revision

The industry's sole standard on the handling, packaging and storage of printed boards. The requirements in this document are intended to protect printed boards from contamination, physical damage, solderability degradation, ESD and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking...

Document #:

IPC-7351

Revision

Product Type

Standard Only

Released: 07/01/2010

Language

English

Current Revision

This popular document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SOPs, QFPs, BGAs, QFNs and SONs. The standard provides printed board designers with an intelligent land pattern naming convention, zero component rotations for CAD systems and three separate land pattern geometries for each component that allow the user to select...

Document #:

IPC-7525

Revision

Product Type

Standard Only

Released: 02/28/2022

Language

English

Current Revision

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

Document #:

IPC-2231

Revision

Product Type

Standard Only

Released: 10/27/2021

Language

English

Current Revision

IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.

Document #:

IPC-2222

Revision

Product Type

Standard Only

Released: 10/07/2020

Language

English

Current Revision

IPC-2222B used in conjunction with IPC-2221, establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. The IPC-2222B standard applies to single-sided, double-sided, or multi-layered boards. Key concepts in IPC-2222B are rigid laminate properties, design requirements for printed board assembly and...

Document #:

IPC-2221

Revision

Product Type

Standard Only

Released: 12/14/2023

Language

English

Current Revision

IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...

Document #:

IPC-2226

Revision

Product Type

Standard Only

Released: 10/12/2017

Language

English

Current Revision

IPC-2226A, Sectional Design Standards for High Density Interconnect (HDI) Printed Boards is used in conjunction with IPC-2221B. The IPC-2226A standard establishes requirements and considerations for the design of high density interconnect (HDI) printed boards and microvia technology. Revision A constitutes a substantial update to the document, with an all new color key for HDI constructions, new...

Document #:

IPC-7093

Revision

Product Type

Standard Only

Released: 11/30/2020

Language

English

Current Revision

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

Document #:

IPC-D-325

Revision

Product Type

Standard Only

Released: 05/01/1995

Language

English

Current Revision

Establishes the general requirements for documentation necessary to fully describe end product printed boards, regardless of raw material, special fabrication requirements, layer count or end product usage. Includes master drawing requirements, board definition and artwork/phototooling. 94 pages. Revised May 1995.

Document #:

IPC-9121

Revision

Product Type

Standard Only

Released: 04/14/2022

Language

English

Current Revision

The IPC-1921A handbook provides problems, causes and possible corrective actions related to printed board manufacturing processes. Includes more than 200 photos and illustrations depicting common defects.

Document #:

IPC-7091

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

English

Current Revision

This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the eﬀects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

Document #:

IPC-2581

Revision

Product Type

Standard Only

Released: 11/20/2020

Language

English

Current Revision

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

Document #:

IPC-7094

Revision

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

Document #:

IPC-PE-740

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Document #:

IPC-DR-570

Revision

Product Type

Standard Only

Released: 04/01/1994

Language

English

Current Revision

Establishes nomenclature and requirements for solid carbide twist drills with four-faceted drill points used in the fabrication of printed boards. 9 pages. Revised April 1994.

Document #:

IPC-D-390

Revision

Product Type

Standard Only

Released: 02/01/1988

Language

English

Current Revision

This document is a general overview of computer aided design and its processes, techniques, considerations and problem areas with respect to printed circuit design. Describes the CAD design process from initial input package requirements to engineering change. 44 pages. Revised February 1988.

Document #:

IPC-DW-425

Revision

Product Type

Standard Only

Released: 09/01/1982

Language

English

Current Revision

This specification establishes the qualification and performance requirements for encapsulated discrete wire interconnection boards with wires that terminate in plated holes. 62 pages. Revised May 1990.

Document #:

IPC-D-310

Revision

Product Type

Standard Only

Released: 06/01/1991

Language

English

Current Revision

This document provides manufacturing and design considerations, input data requirements, test coupons, process control, tape and preform artwork, cut and strip artwork, vector photoplotting, rasterplotting, direct imaging, measurement and quality assurance. 68 pages. Revised June 1991.

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 11/30/2021

Language

English

IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 05/26/2015

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 07/17/2013

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 11/25/2025

Language

English

Current Revision

This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

Document #:

IPC-2152

Revision

Original Version

Product Type

Standard Only

Released: 09/16/2009

Language

English

Current Revision

The sole industry standard for determining appropriate internal and external conductor sizes on printed boards as a function of the current carrying capacity required and the acceptable conductor temperature rise. This document provides guidance on how thermal conductivity, vias, copper planes, power dissipation and printed board material and thickness all factor into the relationship between...

Document #:

IPC-2228

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-2228 standard establishes the specific requirements for the design of rigid, flexible and rigid-flexible printed boards utilizing radio frequency (RF) and/or Microwave circuity and/or high frequency laminates where RF transmission lines and related passive metal layers are considered as distributed circuits, instead of conventional lumped circuit elements. The IPC-2228 standard is used to...

Document #:

IPC-2316

Revision

Original Version

Product Type

Standard Only

Released: 03/01/2007

Language

English

Current Revision

IPC-2316 offers printed board users and designers the necessary information for incorporating formed and placed embedded passive components into their applications. The history of embedded passive technologies is given along with full coverage of embedded resistors, capacitors and inductors. In addition, it also assists the user in understanding some of the physical, electrical and thermal...

Document #:

IPC-2615

Revision

Original Version

Product Type

Standard Only

Released: 07/01/2000

Language

English

Current Revision

The definitive standard on printed board dimensioning and tolerancing is finally here! IPC-2615 comprehensively covers dimensioning and tolerancing of electronic packaging and is consistent with other IPC printed board standards such as IPC-6012A and IPC-2221A. The document includes fundamental dimensioning and tolerancing rules, positional, profile, orientation and form tolerances and detailed...

Document #:

IPC-D-279

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

Document #:

IPC-5262

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

Document #:

IPC-2225

Revision

Original Version

Product Type

Standard Only

Released: 05/01/1998

Language

English

Current Revision

Used in conjunction with IPC-2221A, IPC-2225 establishes the requirements and other considerations (thermal, electrical, electromechanical and mechanical) for the design of Single Chip Module (SCM-L), MCM or MCM-L assemblies. Key concepts include adhesive interconnection information, typical die attach materials, microvia material properties and relationships with DFM and DFE.

Document #:

IPC-D-422

Revision

Original Version

Product Type

Standard Only

Released: 09/01/1982

Language

English

Current Revision

Contains backplane design information from the fabrication and assembly perspective. Includes sections on design and documentation; fabrication; assembly; repair; and inspection. 17 pages. Revised September 1982.

Document #:

IPC-D-354

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1987

Language

English

Current Revision

Describes the usage of libraries within the processing and generation of information files. The data contained within covers both the definition and usage of internal (existing within the information file) and external libraries. The libraries can be used to make generated data more compact and facilitate data exchange and archival. The subroutines within a library can be used one or more times...

Document #:

IPC-D-351

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1985

Language

English

Current Revision

Describes an intelligent, digital format for transfer of drawings between printed wiring board designers, manufacturers and customers. Also conveys additional requirements, guidelines and examples necessary to provide the data structures and concepts for drawing description in digital form. Supplements ANSI/IPC-D-350. Pertains to four basic types of drawings: master drawings, schematics, assembly...

Document #:

IPC-D-355

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1995

Language

English

Current Revision

Describes an intelligent, digital data transfer format for describing component mounting information. Supplements IPC-D-350 and is for designers and assemblers. Data included are pin location, component orientation, etc. This document is frozen; no future updates are planned. 33 pages. Released January 1995.

Document #:

IPC-D-352

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1985

Language

English

Current Revision

Describes the relationship between elements used in electromechanical design and packaging of printed boards. Includes descriptions for logical and physical elements necessary as input to a design system, as well as the network of interconnection description between the various electronic parts. Provides the capability of describing all elements in their final form upon design completion. The...

Document #:

IPC-D-322

Revision

Original Version

Product Type

Standard Only

Released: 09/01/1984

Language

English

Current Revision

Defines guidelines for choosing sizes of printed wiring boards using standard fabrication panel sizes. 4 pages. Reaffirmed September 1991.

Document #:

IPC-A-311

Revision

Original Version

Product Type

Standard Only

Released: 03/01/1996

Language

English

Current Revision

Covers the information and data to be collected during the generation and use of phototools to improve artwork quality, thereby improving yields downstream. It also helps establish and maintain ISO 9000 certification and SPC by facilitating troubleshooting, standardizing the process for both experienced and inexperienced operators and by identifying process improvements for the ultimate...

Document #:

IPC-2612

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...

Document #:

IPC-2223

Revision

Product Type

Standard Only

Released: 09/20/2016

Language

English

Used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. Revision D provides new design guidance and...

Document #:

IPC-2612-1

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

Document #:

IPC-1601

Revision

Product Type

Standard Only

Released: 06/27/2016

Language

English

The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...

Document #:

IPC-2221

Revision

Product Type

Standard Only

Released: 11/20/2012

Language

English

IPC-2221B is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision B are new criteria for conductor characteristics, surface finishes, via protection...

Document #:

IPC-2222

Revision

Product Type

Standard Only

Released: 12/14/2010

Language

English

Used in conjunction with IPC-2221, IPC-2222 establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. This standard applies to single-sided, double-sided or multi-layered boards. Key concepts in this document are: rigid laminate properties, design requirements for printed board assembly and design...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 03/22/2023

Language

English

IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...