Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-D-355 - Standard Only

Printed Board Automated Assembly Description in Digital Form

Document #:
IPC-D-355
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Describes an intelligent, digital data transfer format for describing component mounting information. Supplements IPC-D-350 and is for designers and assemblers. Data included are pin location, component orientation, etc. This document is frozen; no future updates are planned. 33 pages. Released January 1995.
no-image-available

IPC-D-352 - Standard Only

Electronic Design Data Description for Printed Boards in Digital Form

Document #:
IPC-D-352
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Describes the relationship between elements used in electromechanical design and packaging of printed boards. Includes descriptions for logical and physical elements necessary as input to a design system, as well as the network of interconnection description between the various electronic parts. Provides the capability of describing all elements in their final form upon design completion. The...

IPC-A-311 - Standard Only

Process Controls for Phototool Generation and Use

Document #:
IPC-A-311
Revision
Original Version
Product Type
Standard Only
Released:  03/01/1996
Language
English
Current Revision
Covers the information and data to be collected during the generation and use of phototools to improve artwork quality, thereby improving yields downstream. It also helps establish and maintain ISO 9000 certification and SPC by facilitating troubleshooting, standardizing the process for both experienced and inexperienced operators and by identifying process improvements for the ultimate...

IPC-7621 - Standard Only

Guideline for Design, Material Selection and General Application of Encapsulation of Electronic Circuit Assembly by Low Pressure Molding with Thermoplastics

Document #:
IPC-7621
Revision
Original Version
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

IPC-6903 - Standard Only

Terms and Definitions for the Design and Manufacture of Printed Electronics (Additive Circuitry)

Document #:
IPC-6903
Revision
D
Product Type
Standard Only
Released:  10/29/2015
Language
English
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

IPC/JPCA-6901 - Standard Only

Application Categories for Printed Electronics

Document #:
IPC/JPCA-6901
Revision
Original Version
Product Type
Standard Only
Released:  08/26/2015
Language
English
Current Revision
This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

IPC-2612 - Standard Only

Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)

Document #:
IPC-2612
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...
no-image-available

IPC-2223 - Revision D - Standard Only

Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-2223
Revision
D
Product Type
Standard Only
Released:  09/20/2016
Language
English
Used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. Revision D provides new design guidance and...
no-image-available

IPC-2612-01 - Standard Only

Sectional Requirements for Electronic Diagramming Symbol Generation Methodology

Document #:
IPC-2612-1
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

IPC-1601 - Revision A - Standard Only

Printed Board Handling and Storage Guidelines

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  06/27/2016
Language
English
The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...

IPC-2221 - Revision B - Standard Only

Generic Standard on Printed Board Design

Document #:
IPC-2221
Revision
B
Product Type
Standard Only
Released:  11/20/2012
Language
English
IPC-2221B is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision B are new criteria for conductor characteristics, surface finishes, via protection...

IPC-2222 - Revision A - Standard Only

Sectional Design Standard for Rigid Organic Printed Boards

Document #:
IPC-2222
Revision
A
Product Type
Standard Only
Released:  12/14/2010
Language
English
Used in conjunction with IPC-2221, IPC-2222 establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. This standard applies to single-sided, double-sided or multi-layered boards. Key concepts in this document are: rigid laminate properties, design requirements for printed board assembly and design...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
IPC-1791C Cover Image

IPC-1791 - Revision C - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
C
Product Type
Standard Only
Released:  03/22/2023
Language
English
IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...
IPC-1791B Cover Image

IPC-1791 - Revision B - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
B
Product Type
Standard Only
Released:  09/15/2021
Language
English
IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.
no-image-available

IPC-1791 - Revision A - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
A
Product Type
Standard Only
Released:  02/20/2020
Language
English
IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...

IPC-7095 - Revision C - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
C
Product Type
Standard Only
Released:  01/28/2013
Language
English
Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

IPC-1782 - Revision A - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
A
Product Type
Standard Only
Released:  01/13/2021
Language
English
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.
no-image-available

IPC-2141 - Revision A - Standard Only

Design Guide for High-Speed Controlled Impedance Circuit Boards

Document #:
IPC-2141
Revision
A
Product Type
Standard Only
Released:  03/01/2004
Language
English
Controlled impedance is the maintenance of some specified tolerance in the characteristic impedance of an interconnect line (transmission line) that is used to connect different devices on a circuit. Controlled impedance is often a design consideration for high-speed digital or high-frequency analog circuits. This guide is intended to be used by circuit designers, packaging engineers, printed...

IPC-DR-572 - Revision A - Standard Only

Drilling Guidelines for Printed Boards

Document #:
IPC-DR-572
Revision
A
Product Type
Standard Only
Released:  03/01/2007
Language
English
This document provides guidelines for generating good quality holes in printed circuit boards (PCBs) made from a wide variety of materials. It addresses the following topics: Drill Bits, Tooling, Drilling Stacked Materials, Drilling Machines, Drilling Operation, Drilled Hole Quality and Trouble Shooting. 12 pages. Released March 2007.

IPC-7530 - Revision A - Standard Only

Guidelines for Temperature Profiling for Mass Soldering (Reflow & Wave) Processes

Document #:
IPC-7530
Revision
A
Product Type
Standard Only
Released:  04/28/2017
Language
English
This standard provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies. This revision expands the focus of the original standard from reflow profiling to include profiling for vapor phase, laser, selective soldering and wave soldering. The revision also includes a full-color troubleshooting guide for addressing common...

IPC-7525 - Revision B - Standard Only

Stencil Design Guidelines

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  10/24/2011
Language
English
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...
51-75 of 162

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards