Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-4101 - Revision E - Standard with Amendment 1

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
E
Product Type
Standard with amendment(s)
Released:  04/14/2020
Language
English
Current Revision
IPC-4101E-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets which are found after the main body of the standard. The specification sheets are to be used primarily for rigid and multilayer printed boards for electronic interconnections. The IPC-4101E-WAM1 standard contains 70 individual specification sheets that can be...

IPC-SM-840 - Revision E - Standard Only

Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  12/22/2010
Language
English
Current Revision
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-7095 - Revision D - Standard with Amendment 1

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  07/09/2019
Language
English
Current Revision
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...
no-image-available

IPC-1602 - Revision A - Standard Only

Standard for Printed Board Handling and Storage

Document #:
IPC-1602
Revision
A
Product Type
Standard Only
Released:  12/17/2024
Language
English
Current Revision
The industry's sole standard on the handling, packaging and storage of printed boards. The requirements in this document are intended to protect printed boards from contamination, physical damage, solderability degradation, ESD and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking...
IPC-4562 - Cover Image

IPC-4562 - Revision B - Standard Only

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
B
Product Type
Standard Only
Released:  04/01/2024
Language
English
Current Revision
IPC-4562A standard covers metal unsupported foils and foils supported by carrier films suitable for subsequent use in printed boards. IPC-4562B addresses the requirements of metal foils used in printed wiring applications.

IPC-CH-65 - Revision B - Standard Only

Guidelines for Cleaning of Printed Boards and Assemblies

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  07/25/2011
Language
English
Current Revision
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
IPC-2231A Cover Image

IPC-2231 - Revision A - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
A
Product Type
Standard Only
Released:  10/27/2021
Language
English
Current Revision
IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.
no-image-available

IPC-4203 - Revision C - Standard Only

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
C
Product Type
Standard Only
Released:  04/10/2025
Language
English
Current Revision
This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides, which are to be used as cover material and/or bondply for flexible printed circuitry, and supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry.

IPC-7093 - Revision A - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components (BTCs)

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  11/30/2020
Language
English
Current Revision
The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.
no-image-available

IPC-4556 - Revision A - Standard Only

Specification for Electroless Nickel/Electroless Palladium Immersion Gold (ENEPIG) Plating for Printed Boards

Document #:
IPC-4556
Revision
A
Product Type
Standard Only
Released:  07/02/2025
Language
English
Current Revision
IPC-4556A Standard sets the requirements for the use of Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) as a surface finish for printed boards. IPC-4556A standard defines ENEPIG deposit thicknesses for applications including soldering, wire bonding, and as a contact finish.
IPC-9121A Cover Image

IPC-9121 - Revision A - Standard Only

Troubleshooting for Printed Board Fabrication Processes

Document #:
IPC-9121
Revision
A
Product Type
Standard Only
Released:  04/14/2022
Language
English
Current Revision
The IPC-1921A handbook provides problems, causes and possible corrective actions related to printed board manufacturing processes. Includes more than 200 photos and illustrations depicting common defects.
IPC-4412C Cover Images

IPC-4412 - Revision C - Standard Only

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
C
Product Type
Standard Only
Released:  02/28/2022
Language
English
Current Revision
The IPC-4412C covers the requirements for reinforcements woven from "E"glass yarn. These reinforcements are used in the production of prepregs, some of which are pressed into laminates. These prepregs and laminates are the base materials for rigid and mulitlayer printed boards. The IPC-4412C standard contains tables which describe each fabriic style in detail including the yarn used, the number of...
IPC-7091A Cover Image

IPC-7091A - Revision A - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

IPC-4203 - Revision B - Standard Only

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
B
Product Type
Standard Only
Released:  03/01/2018
Language
English
Current Revision
IPC-4203B establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides, which are to be used as cover material and/or bondply for flexible printed circuitry, as well as supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry. IPC-4203B does not cover non...

IPC-7094 - Revision A - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die-Size Components

Document #:
IPC-7094
Revision
A
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

IPC-4103 - Revision B - Standard Only

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
B
Product Type
Standard Only
Released:  11/01/2017
Language
English
Current Revision
IPC-4103B standard covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline and high speed digital electrical and electronic circuits. In addition to better definitions of inclusions and how to properly classify them; redefine "substrates" as, "fabricated sheets"; and a more proper definition...
no-image-available

IPC-PE-740 - Revision A - Standard Only

Troubleshooting for Printed Board Manufacture and Assembly

Document #:
IPC-PE-740
Revision
A
Product Type
Standard Only
Released:  12/01/1997
Language
English
Current Revision
This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

IPC-4411 - Revision A - Standard Only

Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement

Document #:
IPC-4411
Revision
A
Product Type
Standard Only
Released:  11/01/2003
Language
English
Current Revision
Covers the nomenclature, definitions and requirements for reinforcement made from nonwoven para-aramid fibers. Para-aramid reinforcement is primarily used in PCBs for HDI and high speed/high frequency applications. IPC-4411A also includes specification sheets, which can be used when selecting and purchasing nonwoven para-aramid reinforcement. Includes the incorporation of 14 new nonwoven para...
no-image-available

IPC-1730 - Revision A - Standard Only

Laminator Qualification Profile

Document #:
IPC-1730
Revision
A
Product Type
Standard Only
Released:  06/30/2000
Language
English
Current Revision
IPC-1730A is a tool used to categorize a laminate manufacturer's capabilities, which furnishes customer access to detailed information. Used for single or multiple sites or locations, IPC-1730A simplifies auditing processes and reduces the frequency of audits, decreasing paperwork and improving efficiency. The program includes a description, approval and certification profile and a quality profile...
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

IPC-4781 - Standard Only

Qualification and Performance Specification of Permanent, Semi-Permanent and Temporary Legend and/or Marking Ink

Document #:
IPC-4781
Revision
Original Version
Product Type
Standard Only
Released:  05/30/2008
Language
English
Current Revision
The industry's first specification for the evaluation of a legend and/or marking ink material for the determination of acceptability of use in a standard printed board system. IPC-4781 provides coverage for adhesion, material qualification and testing, resistances to solvents, requirements for resistance to lead-free solders, and electrical requirements. 17 pages. Released May 2008.

IPC-4101 - Revision E - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
E
Product Type
Standard Only
Released:  03/01/2017
Language
English
IPC-4101E covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections. This document contains 65 individual specification sheets that can be searched using keywords. These keywords...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-T-50 - Revision P - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
P
Product Type
Standard Only
Released:  11/25/2025
Language
English
Current Revision
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

IPC-4811 - Standard Only

Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4811
Revision
Original Version
Product Type
Standard Only
Released:  05/30/2008
Language
English
Current Revision
This document describes materials that can be used for the fabrication of embedded passive resistor devices within the finished printed circuit board substrate. It provides information on general designations and associated characteristics of embedded passive device (EPD) resistor materials. The document shall be used as a qualification and conformance standard for designers and users when...
no-image-available

JIG-101 - Standard Only

Joint Industry Guide Materials Composition Declaration for Electrotechnical Products

Document #:
JIG-101
Revision
4
Product Type
Standard Only
Released:  09/08/2011
Language
English
Current Revision
The Joint Industry Guide Material Composition Declaration for Electrotechnical Products has been updated to include the most recent substances for restriction. The JIG-101 is an industry materials declaration guide that facilitates reporting of material content information across the global electrotechnical supply chain. This document sets minimum requirements for a materials declaration. The...

IPC-4563 - Standard Only

Resin Coated Copper Foil for Printed Boards Guideline

Document #:
IPC-4563
Revision
Original Version
Product Type
Standard Only
Released:  02/11/2008
Language
English
Current Revision
This guideline covers the requirements for resin coated copper foil intended for use in the formation of high density interconnect surface microvias for printed boards and printed board assemblies. 19 pages. Released November 2007.

IPC-4121 - Standard Only

Guidelines for Selecting Core Construction for Multilayer Printed Wiring Board Applications

Document #:
IPC-4121
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2000
Language
English
Current Revision
IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

IPC/EIA-J-STD-032 - Standard Only

Performance Standard for Ball Grid Array Balls

Document #:
IPC/EIA-J-STD-032
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2002
Language
English
Current Revision
This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-A-142 - Standard Only

Specification for Finished Fabric Woven from Aramid for Printed Boards

Document #:
IPC-A-142
Revision
Original Version
Product Type
Standard Only
Released:  06/01/1990
Language
English
Current Revision
Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.

IPC-9199 - Standard Only

Statistical Process Control (SPC) Quality Rating

Document #:
IPC-9199
Revision
Original Version
Product Type
Standard Only
Released:  09/01/2002
Language
English
Current Revision
This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

IPC-4101 - Revision D - Standard with Amendment 1

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard with amendment(s)
Released:  05/12/2014
Language
English
IPC-4101D-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 65 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but with...

IPC-4101 - Revision D - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
D
Product Type
Standard Only
Released:  05/12/2014
Language
English
This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...

IPC-3408 - Standard Only

General Requirements for Anisotropically Conductive Adhesives Films

Document #:
IPC-3408
Revision
Original Version
Product Type
Standard Only
Released:  11/01/1996
Language
English
Current Revision
This document covers requirements and test methods for anisotropically conductive adhesive films used to bond and electrically connect components. Applications include the following: flexible PWB-to-glass, flexible PWB-to-rigid PWB, flip chip-to-glass, flip chip-to-flexible PWB, flip chip-to-rigid PWB, and fine pitch SMD. The adhesive film may be supplied pre-attached to a flexible circuit or...

IPC-3406 - Standard Only

Guidelines for Electrically Conductive Surface Mount Adhesives

Document #:
IPC-3406
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
Current Revision
IPC-3406 offers guidelines for selecting electrically conductive adhesives for use in electronics manufacturing as solder alternatives. The process discussion attempts to stay within the bounds of the existing solder assembly infrastructure. Both major types of adhesives, isotropic (conducting equally in all directions) and anisotropic (unidirectional conductivity) are covered. Polymer adhesives...
no-image-available

IPC-1731 - Standard Only

Strategic Raw Materials Supplier Qualification Profile

Document #:
IPC-1731
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2000
Language
English
Current Revision
Suppliers of raw materials for laminate manufacturing now have an industry-approved questionnaire to supply current and potential customers with a self-assessment of their facilities. IPC-1731 gives suppliers of raw materials the opportunity to create a profile of their manufacturing facility(s) that will be consistent with those developed by other industry suppliers. Using the Microsoft Word (TM)...

IPC-1601 - Revision A - Standard Only

Printed Board Handling and Storage Guidelines

Document #:
IPC-1601
Revision
A
Product Type
Standard Only
Released:  06/27/2016
Language
English
The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types and methods, production environment, handling and transport of product, and establishing baking profiles...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-4562 - Revision A - Standard with Amendment 1

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
A
Product Type
Standard with amendment(s)
Released:  01/01/2016
Language
English
IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that was previously removed during the revision A actions. Unless otherwise agreed upon between the user and supplier (AABUS), metal foils...

IPC-7095 - Revision C - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
C
Product Type
Standard Only
Released:  01/28/2013
Language
English
Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-7095 - Revision A - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
A
Product Type
Standard Only
Released:  10/01/2004
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-4412 - Revision B - Standard Only

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Standard Only
Released:  06/17/2013
Language
English
IPC-4412B exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E" glass) borosilicate glass. Bulk "E" glass, for ease of description, is composed of a blend of raw metal oxides that form a borosilicate glass upon melting. Once...

IPC-4202 - Revision A - Standard Only

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Standard Only
Released:  04/13/2010
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed circuitry and flexible flat cables. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most...
no-image-available

IPC-4103 - Revision A - Standard with Amendment 1

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
A
Product Type
Standard with amendment(s)
Released:  03/25/2014
Language
English
This specification covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline, and high speed digital electrical and electronic circuits. In addition to updated testing parameters, inspection lot requirements, revised visual acceptance criteria, this revision incorporates a new specification...
no-image-available

IPC-4101 - Revision C - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
C
Product Type
Standard Only
Released:  08/26/2009
Language
English
This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 66 individual specification sheets that can be searched using key words. These key words allow the document's user to find materials of a similar nature, but...
no-image-available

IPC-1602 - Revision A - Redline Standard

Redline Comparison IPC-1602 to IPC-1602A

Document #:
IPC-1602
Revision
A
Product Type
Redline Standard
Released:  04/23/2025
Language
English
Current Revision
IPC-1602A Redline document shows the changes from IPC-1602 to IPC-1602A in a side-by-side comparison of the two documents. This is only available in digital format.

IPC-4203 - Revision A - Standard Only

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
A
Product Type
Standard Only
Released:  01/25/2013
Language
English
This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides. These materials are to be used as cover material for flexible printed circuitry as well as supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry. The standard does not address...

IPC-4202 - Revision B - Standard Only

Flexible Base Dielectrics for Use in Flexible Printed Boards

Document #:
IPC-4202
Revision
B
Product Type
Standard Only
Released:  04/20/2017
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed boards. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most current classification...
no-image-available

IPC-4821 - Amendment 1

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Amendment
Released:  05/01/2006
Language
English
Current Revision
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

ボールグリッドアレイ(BGA)の設計および組立プロセスの実施 – 改訂版1

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  06/17/2020
Language
Japanese
Current Revision
IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。

IPC-SM-840 - Revision E - Standard Only

永久性阻焊剂和挠性覆盖材料的鉴定和性能规范

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  11/20/2012
Language
Chinese
Current Revision
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

BGA设计与组装工艺的实施

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  09/19/2019
Language
Chinese
Current Revision
IPC-7095D在设计，组装，检查和维修过程中实施球栅阵列（BGA）和细节距球栅阵列（FBGA）技术提出了了一些独特的挑战。它为使用或正在考虑使用BGA的用户提供有用和实用的信息。 它还介绍了如何使用BGA成功实现印刷电路板组件的稳健设计和装配流程，以及解决BGA组装过程中可能出现的一些常见异常的方法。由于焊球中合金，焊球形状，封装程序等的改变，许多问题变得尤为重要。D版主要重点是为组装后出现的一些新的机械失效问题如坑裂或层压缺陷提供信息。除了提供BGA检查和维修的指引外，本标准还解决了与BGA相关的可靠性问题和无铅焊点的使用标准。该标准中有许多X射线和内窥镜的照片和插图以确认行业中BGA组装工艺的实施中的遇到的一些情况。
no-image-available

IPC-4412 - Revision B - Amendment 1

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  04/01/2014
Language
English
Specification for Finished Fabric Woven from "E" Glass for Printed Boards The Amendment 1 to IPC-4412B adds a new glass yarn [either SI identification => (4 1.32 1X0) or US identification => (BC 3750 1/0)] and a new light weight weave style => (1010) to the standard
no-image-available

IPC-4412 - Revision B - Amendment 2

Specification for finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  05/18/2018
Language
English
IPC-4421B-AM2 an amendment includes two extensive tables of finished fabric glass styles, one in SI (metric) units and the other in U.S. (English) units. IPC-4412B standard exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E"...

IPC-4103 - Revision A - Amendment 1

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
A
Product Type
Amendment
Released:  01/01/2014
Language
English
Specification for Base Materials for High Speed/High Frequency Applications Amendment 1 generates a formalized record, for document control purposes, of corrections to ten separate sections in the main body of the standard; to the first 16 "legacy" specification sheets (IPC-4103/1 through IPC-4103/16); and to the 10 "new format" specification sheets for bonding layer materials (IPC-4103/500...

IPC-4101 - Revision E - Standard Only

刚性及多层印制板用基材规范

Document #:
IPC-4101
Revision
E
Product Type
Standard Only
Released:  11/16/2018
Language
Chinese
Current Revision
IPC-4101E涵盖了被称为层压板或粘结片的基材的要求，并列在主体最后一部分的规格单中。 这些要求主要用于电子互连的刚性和多层印刷电路板中。 本文档包含了65个单独的规格单，可以使用关键字搜索。 这些关键字允许本文档的用户查找类似性质的材料，但具有特定的不同特性，可以对其层压板和/或粘结片选择需求进行微调。 修订版E增加了附录A，提供补充检查要求，但仅在材料用户的采购订单或主图纸有要求时使用。 全文共152页。 于2017年3月发布。2018年10月翻译。
no-image-available

IPC-4202 - Amendment 2

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 2 to IPC-4202A modifies the standard by changing only one requirement in property 9. ‘Propogation Tear Strength, minimum’ for a base dielectric thickness that ranges from ≤ 50 µm to < 102 µm; changing the propogation tear strength to 13.5 grams [0.476 ounces].
no-image-available

IPC-4203 - Revision A - Amendment 1

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
A
Product Type
Amendment
Released:  10/01/2014
Language
English
Amendment 1 modifies the standard by adding a new IPC-4203/25 Specification Sheet. Also, Table 1-5 Adhesive Type Designation has a new designation added: “V [Polyamide-imide]” and finally, the appropriate header information from /25 specification sheet is added to a section in the main body of the standard titled: Specification Sheets for Adhesive Coated Dielectric Films or Adhesive Bonding Films.
no-image-available

IPC-4202 - Revision A - Amendment 1

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 1 to IPC-4202A modifies the standard by correcting editorial errors; converts metric dimensional units of measure to those commonly used throughout industry; describes the flammability method of test and requirements for very thin materials (VTM); and corrects property requirement errors in all nine specification sheets contained in this standard.
no-image-available

IPC-4562 - Revision A - Amendment 1

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
A
Product Type
Amendment
Released:  02/01/2013
Language
English
Amendment 1 to IPC-4562A re-inserts the specification sheet IPC-4562/6 (CU-W6) back into the IPC-4562A document that was previously removed when the standard was revised to it's a revision from its original release in April 2008. Also included in this Amendment 1 are all references to the IPC-4562/6 (CU-W6) in section 1.2.4.1, the Table A1, the summary of all specification sheets as well as the...
no-image-available

IPC-7093 - Revision A - Standard Only

底部端子元器件(BTCs)设计和组装工艺的实施

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  09/14/2022
Language
Chinese
Current Revision
IPC-7093A 标准为实施底部端子元器件(BTCs)提供了基本的设计和组装指南。具体而言，IPC-7093A 提供了与 BTCs 相关的关键设计、材料、组装、检查、维修、质量和可靠性问题的指南。
no-image-available

IPC-7091 - Revision A - Standard Only

3D(三次元)部品の設計および組立プロセスの実施

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  11/04/2024
Language
Japanese
Current Revision
本書では、3D部品の技術を実施する際の設計/組立の課題や、課題への対処方法について述べる。ケースに収納されていない複数の半導体ダイ素子を単一パッケージのフォーマットに組み合わせる効果を考える場合、その影響は個々の部品特性にも、これまでの組立手法にも及ぶ。本規格に含まれる情報は、3D半導体パッケージの組立とプロセスに関連する最適な機能性、工程評価、最終製品の信頼性とリペアの諸問題の解決に向け焦点を当てたものである。
1-75 of 118

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards