Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-7095 - Revision C - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
C
Product Type
Standard Only
Released:  01/28/2013
Language
English
Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-7095 - Revision A - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
A
Product Type
Standard Only
Released:  10/01/2004
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-4412 - Revision B - Standard Only

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Standard Only
Released:  06/17/2013
Language
English
IPC-4412B exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E" glass) borosilicate glass. Bulk "E" glass, for ease of description, is composed of a blend of raw metal oxides that form a borosilicate glass upon melting. Once...

IPC-4202 - Revision A - Standard Only

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Standard Only
Released:  04/13/2010
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed circuitry and flexible flat cables. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most...
no-image-available

IPC-4103 - Revision A - Standard with Amendment 1

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
A
Product Type
Standard with amendment(s)
Released:  03/25/2014
Language
English
This specification covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline, and high speed digital electrical and electronic circuits. In addition to updated testing parameters, inspection lot requirements, revised visual acceptance criteria, this revision incorporates a new specification...
no-image-available

IPC-4101 - Revision C - Standard Only

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4101
Revision
C
Product Type
Standard Only
Released:  08/26/2009
Language
English
This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 66 individual specification sheets that can be searched using key words. These key words allow the document's user to find materials of a similar nature, but...
no-image-available

IPC-1602 - Revision A - Redline Standard

Redline Comparison IPC-1602 to IPC-1602A

Document #:
IPC-1602
Revision
A
Product Type
Redline Standard
Released:  04/23/2025
Language
English
Current Revision
IPC-1602A Redline document shows the changes from IPC-1602 to IPC-1602A in a side-by-side comparison of the two documents. This is only available in digital format.

IPC-4203 - Revision A - Standard Only

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
A
Product Type
Standard Only
Released:  01/25/2013
Language
English
This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides. These materials are to be used as cover material for flexible printed circuitry as well as supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry. The standard does not address...

IPC-4202 - Revision B - Standard Only

Flexible Base Dielectrics for Use in Flexible Printed Boards

Document #:
IPC-4202
Revision
B
Product Type
Standard Only
Released:  04/20/2017
Language
English
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed boards. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most current classification...
no-image-available

IPC-4821 - Amendment 1

Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

Document #:
IPC-4821
Revision
Original Version
Product Type
Amendment
Released:  05/01/2006
Language
English
Current Revision
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

ボールグリッドアレイ(BGA)の設計および組立プロセスの実施 – 改訂版1

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  06/17/2020
Language
Japanese
Current Revision
IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。

IPC-SM-840 - Revision E - Standard Only

永久性阻焊剂和挠性覆盖材料的鉴定和性能规范

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  11/20/2012
Language
Chinese
Current Revision
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

BGA设计与组装工艺的实施

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  09/19/2019
Language
Chinese
Current Revision
IPC-7095D在设计，组装，检查和维修过程中实施球栅阵列（BGA）和细节距球栅阵列（FBGA）技术提出了了一些独特的挑战。它为使用或正在考虑使用BGA的用户提供有用和实用的信息。 它还介绍了如何使用BGA成功实现印刷电路板组件的稳健设计和装配流程，以及解决BGA组装过程中可能出现的一些常见异常的方法。由于焊球中合金，焊球形状，封装程序等的改变，许多问题变得尤为重要。D版主要重点是为组装后出现的一些新的机械失效问题如坑裂或层压缺陷提供信息。除了提供BGA检查和维修的指引外，本标准还解决了与BGA相关的可靠性问题和无铅焊点的使用标准。该标准中有许多X射线和内窥镜的照片和插图以确认行业中BGA组装工艺的实施中的遇到的一些情况。
no-image-available

IPC-4412 - Revision B - Amendment 1

Specification for Finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  04/01/2014
Language
English
Specification for Finished Fabric Woven from "E" Glass for Printed Boards The Amendment 1 to IPC-4412B adds a new glass yarn [either SI identification => (4 1.32 1X0) or US identification => (BC 3750 1/0)] and a new light weight weave style => (1010) to the standard
no-image-available

IPC-4412 - Revision B - Amendment 2

Specification for finished Fabric Woven from "E" Glass for Printed Boards

Document #:
IPC-4412
Revision
B
Product Type
Amendment
Released:  05/18/2018
Language
English
IPC-4421B-AM2 an amendment includes two extensive tables of finished fabric glass styles, one in SI (metric) units and the other in U.S. (English) units. IPC-4412B standard exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E"...

IPC-4103 - Revision A - Amendment 1

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
A
Product Type
Amendment
Released:  01/01/2014
Language
English
Specification for Base Materials for High Speed/High Frequency Applications Amendment 1 generates a formalized record, for document control purposes, of corrections to ten separate sections in the main body of the standard; to the first 16 "legacy" specification sheets (IPC-4103/1 through IPC-4103/16); and to the 10 "new format" specification sheets for bonding layer materials (IPC-4103/500...

IPC-4101 - Revision E - Standard Only

刚性及多层印制板用基材规范

Document #:
IPC-4101
Revision
E
Product Type
Standard Only
Released:  11/16/2018
Language
Chinese
Current Revision
IPC-4101E涵盖了被称为层压板或粘结片的基材的要求，并列在主体最后一部分的规格单中。 这些要求主要用于电子互连的刚性和多层印刷电路板中。 本文档包含了65个单独的规格单，可以使用关键字搜索。 这些关键字允许本文档的用户查找类似性质的材料，但具有特定的不同特性，可以对其层压板和/或粘结片选择需求进行微调。 修订版E增加了附录A，提供补充检查要求，但仅在材料用户的采购订单或主图纸有要求时使用。 全文共152页。 于2017年3月发布。2018年10月翻译。
no-image-available

IPC-4202 - Amendment 2

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 2 to IPC-4202A modifies the standard by changing only one requirement in property 9. ‘Propogation Tear Strength, minimum’ for a base dielectric thickness that ranges from ≤ 50 µm to < 102 µm; changing the propogation tear strength to 13.5 grams [0.476 ounces].
no-image-available

IPC-4203 - Revision A - Amendment 1

Cover and Bonding Material for Flexible Printed Circuitry

Document #:
IPC-4203
Revision
A
Product Type
Amendment
Released:  10/01/2014
Language
English
Amendment 1 modifies the standard by adding a new IPC-4203/25 Specification Sheet. Also, Table 1-5 Adhesive Type Designation has a new designation added: “V [Polyamide-imide]” and finally, the appropriate header information from /25 specification sheet is added to a section in the main body of the standard titled: Specification Sheets for Adhesive Coated Dielectric Films or Adhesive Bonding Films.
no-image-available

IPC-4202 - Revision A - Amendment 1

Flexible Base Dielectrics for Use in Flexible Printed Circuitry

Document #:
IPC-4202
Revision
A
Product Type
Amendment
Released:  03/01/2014
Language
English
Amendment 1 to IPC-4202A modifies the standard by correcting editorial errors; converts metric dimensional units of measure to those commonly used throughout industry; describes the flammability method of test and requirements for very thin materials (VTM); and corrects property requirement errors in all nine specification sheets contained in this standard.
no-image-available

IPC-4562 - Revision A - Amendment 1

Metal Foil for Printed Board Applications

Document #:
IPC-4562
Revision
A
Product Type
Amendment
Released:  02/01/2013
Language
English
Amendment 1 to IPC-4562A re-inserts the specification sheet IPC-4562/6 (CU-W6) back into the IPC-4562A document that was previously removed when the standard was revised to it's a revision from its original release in April 2008. Also included in this Amendment 1 are all references to the IPC-4562/6 (CU-W6) in section 1.2.4.1, the Table A1, the summary of all specification sheets as well as the...
no-image-available

IPC-7093 - Revision A - Standard Only

底部端子元器件(BTCs)设计和组装工艺的实施

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  09/14/2022
Language
Chinese
Current Revision
IPC-7093A 标准为实施底部端子元器件(BTCs)提供了基本的设计和组装指南。具体而言，IPC-7093A 提供了与 BTCs 相关的关键设计、材料、组装、检查、维修、质量和可靠性问题的指南。
no-image-available

IPC-7091 - Revision A - Standard Only

3D(三次元)部品の設計および組立プロセスの実施

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  11/04/2024
Language
Japanese
Current Revision
本書では、3D部品の技術を実施する際の設計/組立の課題や、課題への対処方法について述べる。ケースに収納されていない複数の半導体ダイ素子を単一パッケージのフォーマットに組み合わせる効果を考える場合、その影響は個々の部品特性にも、これまでの組立手法にも及ぶ。本規格に含まれる情報は、3D半導体パッケージの組立とプロセスに関連する最適な機能性、工程評価、最終製品の信頼性とリペアの諸問題の解決に向け焦点を当てたものである。
51-75 of 118

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards