Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  04/04/2018
Language
English
Current Revision
IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...
IPC-J-STD-020F Cover Image

IPC/JEDEC-J-STD-020 - Revision F - Standard Only

Moisture/Reflow Sensitivity Classification for Non-hermetic Surface Mount Devices (SMDs)

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  02/16/2023
Language
English
Current Revision
IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...
IPC-6012F -- Cover Image

IPC-6012 - Revision F - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  09/28/2023
Language
English
Current Revision
IPC-6012F, covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical...
IPC-6013E Cover Image

IPC-6013 - Revision E - Standard Only

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Standard Only
Released:  09/16/2021
Language
English
Current Revision
IPC-6013E standard covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. The IPC-6013E standard incorporates new and updated requirements for final...
IPC-6018D Cover Images

IPC-6018 - Revision D - Standard Only

Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
D
Product Type
Standard Only
Released:  03/01/2022
Language
English
Current Revision
The IPC-6018D standard covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

IPC-SM-840 - Revision E - Standard Only

Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  12/22/2010
Language
English
Current Revision
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-7095 - Revision D - Standard with Amendment 1

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  07/09/2019
Language
English
Current Revision
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

IPC-CH-65 - Revision B - Standard Only

Guidelines for Cleaning of Printed Boards and Assemblies

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  07/25/2011
Language
English
Current Revision
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
IPC-2231A Cover Image

IPC-2231 - Revision A - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
A
Product Type
Standard Only
Released:  10/27/2021
Language
English
Current Revision
IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.

IPC-7093 - Revision A - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components (BTCs)

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  11/30/2020
Language
English
Current Revision
The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

IPC-9252 - Revision B - Standard Only

Requirements for Electrical Testing of Unpopulated Printed Boards

Document #:
IPC-9252
Revision
B
Product Type
Standard Only
Released:  09/15/2016
Language
English
Current Revision
IPC-9252 defines levels of appropriate testing and assists in the selection of the test analyzer, test parameters, test data and fixturing required to perform electrical test(s) on unpopulated printed boards and innerlayers. Revision B provides new requirements for resistive and indirect continuity and isolating testing, test record marking and traceability and an updated sample electrical test...
no-image-available

IPC/JEDEC-J-STD-609 - Revision C - Standard Only

Marking, Symbols, and Labels of Leaded and Lead-Free Terminal Finished Materials Used in Electronic Assembly

Document #:
IPC/JEDEC-J-STD-609
Revision
C
Product Type
Standard Only
Released:  02/05/2025
Language
English
Current Revision
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: 1. those assemblies that are assembled with lead-containing or lead-free solder; 2. components that have lead-containing or lead-free second level interconnect terminal finishes and materials; 3. the maximum component temperature not to be exceeded during...
IPC-J-STD-035A Cover Image

IPC/JEDEC-J-STD-035 - Revision A - Standard Only

Acoustic Microscopy for Nonhermetic Encapsulated Electronics Devices

Document #:
IPC/JEDEC-J-STD-035
Revision
A
Product Type
Standard Only
Released:  02/16/2023
Language
English
Current Revision
IPC/JEDEC J-STD-035A test method defines the procedures for performing acoustic microscopy on nonhermetic encapsulated electronic devices. IPC/JEDEC J-STD-035A method provides users with an acoustic microscopy process flow for detecting anomalies (delaminations, cracks, mold compound voids, etc.) nondestructively in encapsulated electronic devices while achieving reproducibility
IPC-7091A Cover Image

IPC-7091A - Revision A - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...
IPC-6017A Cover Image

IPC-6017 - Revision A - Standard Only

Qualification and Performance Specification for Printed Boards Containing Embedded Active and Passive Circuitry

Document #:
IPC-6017
Revision
A
Product Type
Standard Only
Released:  09/16/2021
Language
English
Current Revision
The IPC-6017A standard defines the electrical, mechanical, and environmental requirements specific to embedded passive and active circuitry in printed boards. These requirements are in addition to the applicable requirements of other performance specification(s) (e.g., J-STD-001).

IPC-7094 - Revision A - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die-Size Components

Document #:
IPC-7094
Revision
A
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...
IPC-6012E-AM1 Cover Image

IPC-6012 - Revision E - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  04/20/2022
Language
English
Current Revision
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
no-image-available

IPC-6013 - Revision D - Amendment 1

Qualification and Performance Specification for Flexible and Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Amendment
Released:  05/03/2018
Language
English
Current Revision
IPC-6013D-AM1 is an amendment makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6013D. IPC-6013D-AM1 is an amendment which implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after July 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with...
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-6012EA Cover Image

IPC-6012 - Revision E - Addendum - Automotive

Automotive Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  11/30/2021
Language
English
Current Revision
The IPC-6012EA Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012 revision E, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The addendum includes updated requirements for lifted lands, pattern feature accuracy...
no-image-available

IPC-6012 - Revision F - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Addendum
Released:  02/23/2024
Language
English
Current Revision
The IPC-6012FS space addendum provides exceptions to IPC Performance Class 3 requirements of the IPC-6012F for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012FS covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground...
no-image-available

IPC-6013 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Addendum
Released:  04/12/2022
Language
English
Current Revision
The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...

IPC-6012 - Revision E - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012E, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  04/24/2020
Language
English
Current Revision
The IPC-6012ES space addendum provides exceptions to Class 3 requirements of the IPC-6012E for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012ES covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground testing...

IPC-6012 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  09/10/2020
Language
English
Current Revision
The IPC-6012EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012E, for rigid printed boards that must meet requirements to high reliability medical device applications. IPC-6012EM is the only global industry-consensus standard for Medical Applications to Qualification and Performance Specifications for Rigid...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-T-50 - Revision P - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
P
Product Type
Standard Only
Released:  11/25/2025
Language
English
Current Revision
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

IPC-D-279 - Standard Only

Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies

Document #:
IPC-D-279
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
Current Revision
Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

IPC-5704 - Standard Only

Cleanliness Requirements for Unpopulated Printed Boards

Document #:
IPC-5704
Revision
Original Version
Product Type
Standard Only
Released:  01/27/2010
Language
English
Current Revision
Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

IPC-5703 - Standard Only

Cleanliness Guidelines for Printed Board Fabricators

Document #:
IPC-5703
Revision
Original Version
Product Type
Standard Only
Released:  05/17/2013
Language
English
Current Revision
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC-6012 - Revision E - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Standard Only
Released:  02/20/2020
Language
English
IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

IPC-9241 - Standard Only

Guidelines for Microsection Preparation

Document #:
IPC-9241
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2017
Language
English
Current Revision
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

IPC-6015 - Standard Only

Qualification & Performance Specification for Organic Multichip Module (MCM-L) Mounting & Interconnecting Structures

Document #:
IPC-6015
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1998
Language
English
Current Revision
Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

Moisture/Reflow Sensitivity Classification for Nonhermetic Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  02/03/2015
Language
English
IPC JEDEC J-STD-020 is used to determine what moisture-sensitivity-level (MSL) classification level should be used so that surface mount devices (SMDs) can be properly packaged, stored and handled to avoid subsequent thermal and mechanical damage during the assembly solder reflow attachment and/or repair operation. J-STD-020 covers components to be processed at higher temperatures for lead-free...
no-image-available

IPC-OI-645 - Standard Only

Standard for Visual Optical Inspection Aids

Document #:
IPC-OI-645
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Current Revision
Establishes requirements, definitions and certification provisions for optical inspection aids. Defines inspection grades to be used as accept/reject criteria for optical inspection aids. 40 pages. Released October 1993.

IPC-6012 - Revision D - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Standard Only
Released:  09/22/2015
Language
English
This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...
no-image-available

IPC/EIA-J-STD-028 - Standard Only

Performance Standard for Construction of Flip Chip and Chip Scale Bumps

Document #:
IPC/EIA-J-STD-028
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1999
Language
English
Current Revision
This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
no-image-available

IPC-MC-790 - Standard Only

Guidelines for Multichip Module Technology Utilization

Document #:
IPC-MC-790
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1992
Language
English
Current Revision
Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

IPC-CA-821 - Standard Only

General Requirements for Thermally Conductive Adhesives

Document #:
IPC-CA-821
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

IPC-9641 - Standard Only

High Temperature Printed Board Flatness Guideline

Document #:
IPC-9641
Revision
Original Version
Product Type
Standard Only
Released:  07/10/2013
Language
English
Current Revision
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

IPC-6013 - Revision D - Standard Only

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Standard Only
Released:  09/01/2017
Language
English
The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC/JEDEC-J-STD-609 - Revision B - Standard Only

Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes

Document #:
IPC/JEDEC-J-STD-609
Revision
B
Product Type
Standard Only
Released:  11/01/2016
Language
English
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...
1-50 of 154

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards