Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  04/04/2018
Language
English
Current Revision
IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...
IPC-J-STD-020F Cover Image

IPC/JEDEC-J-STD-020 - Revision F - Standard Only

Moisture/Reflow Sensitivity Classification for Non-hermetic Surface Mount Devices (SMDs)

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  02/16/2023
Language
English
Current Revision
IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...
IPC-6012F -- Cover Image

IPC-6012 - Revision F - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  09/28/2023
Language
English
Current Revision
IPC-6012F, covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical...
IPC-6013E Cover Image

IPC-6013 - Revision E - Standard Only

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Standard Only
Released:  09/16/2021
Language
English
Current Revision
IPC-6013E standard covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. The IPC-6013E standard incorporates new and updated requirements for final...
IPC-6018D Cover Images

IPC-6018 - Revision D - Standard Only

Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
D
Product Type
Standard Only
Released:  03/01/2022
Language
English
Current Revision
The IPC-6018D standard covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

IPC-SM-840 - Revision E - Standard Only

Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  12/22/2010
Language
English
Current Revision
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-7095 - Revision D - Standard with Amendment 1

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  07/09/2019
Language
English
Current Revision
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

IPC-CH-65 - Revision B - Standard Only

Guidelines for Cleaning of Printed Boards and Assemblies

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  07/25/2011
Language
English
Current Revision
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
IPC-2231A Cover Image

IPC-2231 - Revision A - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
A
Product Type
Standard Only
Released:  10/27/2021
Language
English
Current Revision
IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.

IPC-7093 - Revision A - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components (BTCs)

Document #:
IPC-7093
Revision
A
Product Type
Standard Only
Released:  11/30/2020
Language
English
Current Revision
The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

IPC-9252 - Revision B - Standard Only

Requirements for Electrical Testing of Unpopulated Printed Boards

Document #:
IPC-9252
Revision
B
Product Type
Standard Only
Released:  09/15/2016
Language
English
Current Revision
IPC-9252 defines levels of appropriate testing and assists in the selection of the test analyzer, test parameters, test data and fixturing required to perform electrical test(s) on unpopulated printed boards and innerlayers. Revision B provides new requirements for resistive and indirect continuity and isolating testing, test record marking and traceability and an updated sample electrical test...
no-image-available

IPC/JEDEC-J-STD-609 - Revision C - Standard Only

Marking, Symbols, and Labels of Leaded and Lead-Free Terminal Finished Materials Used in Electronic Assembly

Document #:
IPC/JEDEC-J-STD-609
Revision
C
Product Type
Standard Only
Released:  02/05/2025
Language
English
Current Revision
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: 1. those assemblies that are assembled with lead-containing or lead-free solder; 2. components that have lead-containing or lead-free second level interconnect terminal finishes and materials; 3. the maximum component temperature not to be exceeded during...
IPC-J-STD-035A Cover Image

IPC/JEDEC-J-STD-035 - Revision A - Standard Only

Acoustic Microscopy for Nonhermetic Encapsulated Electronics Devices

Document #:
IPC/JEDEC-J-STD-035
Revision
A
Product Type
Standard Only
Released:  02/16/2023
Language
English
Current Revision
IPC/JEDEC J-STD-035A test method defines the procedures for performing acoustic microscopy on nonhermetic encapsulated electronic devices. IPC/JEDEC J-STD-035A method provides users with an acoustic microscopy process flow for detecting anomalies (delaminations, cracks, mold compound voids, etc.) nondestructively in encapsulated electronic devices while achieving reproducibility
IPC-7091A Cover Image

IPC-7091A - Revision A - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...
IPC-6017A Cover Image

IPC-6017 - Revision A - Standard Only

Qualification and Performance Specification for Printed Boards Containing Embedded Active and Passive Circuitry

Document #:
IPC-6017
Revision
A
Product Type
Standard Only
Released:  09/16/2021
Language
English
Current Revision
The IPC-6017A standard defines the electrical, mechanical, and environmental requirements specific to embedded passive and active circuitry in printed boards. These requirements are in addition to the applicable requirements of other performance specification(s) (e.g., J-STD-001).

IPC-7094 - Revision A - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die-Size Components

Document #:
IPC-7094
Revision
A
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...
IPC-6012E-AM1 Cover Image

IPC-6012 - Revision E - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  04/20/2022
Language
English
Current Revision
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
no-image-available

IPC-6013 - Revision D - Amendment 1

Qualification and Performance Specification for Flexible and Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Amendment
Released:  05/03/2018
Language
English
Current Revision
IPC-6013D-AM1 is an amendment makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6013D. IPC-6013D-AM1 is an amendment which implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after July 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with...
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-6012EA Cover Image

IPC-6012 - Revision E - Addendum - Automotive

Automotive Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  11/30/2021
Language
English
Current Revision
The IPC-6012EA Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012 revision E, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The addendum includes updated requirements for lifted lands, pattern feature accuracy...
no-image-available

IPC-6012 - Revision F - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Addendum
Released:  02/23/2024
Language
English
Current Revision
The IPC-6012FS space addendum provides exceptions to IPC Performance Class 3 requirements of the IPC-6012F for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012FS covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground...
no-image-available

IPC-6013 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Addendum
Released:  04/12/2022
Language
English
Current Revision
The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...

IPC-6012 - Revision E - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012E, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  04/24/2020
Language
English
Current Revision
The IPC-6012ES space addendum provides exceptions to Class 3 requirements of the IPC-6012E for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012ES covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground testing...

IPC-6012 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  09/10/2020
Language
English
Current Revision
The IPC-6012EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012E, for rigid printed boards that must meet requirements to high reliability medical device applications. IPC-6012EM is the only global industry-consensus standard for Medical Applications to Qualification and Performance Specifications for Rigid...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-T-50 - Revision P - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
P
Product Type
Standard Only
Released:  11/25/2025
Language
English
Current Revision
This document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. Revision P contains over 120 new or revised terms, including new terminology for back-drill structures, cable and wire...

IPC-D-279 - Standard Only

Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies

Document #:
IPC-D-279
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
Current Revision
Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

IPC-5704 - Standard Only

Cleanliness Requirements for Unpopulated Printed Boards

Document #:
IPC-5704
Revision
Original Version
Product Type
Standard Only
Released:  01/27/2010
Language
English
Current Revision
Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

IPC-5703 - Standard Only

Cleanliness Guidelines for Printed Board Fabricators

Document #:
IPC-5703
Revision
Original Version
Product Type
Standard Only
Released:  05/17/2013
Language
English
Current Revision
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC-6012 - Revision E - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Standard Only
Released:  02/20/2020
Language
English
IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

IPC-9241 - Standard Only

Guidelines for Microsection Preparation

Document #:
IPC-9241
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2017
Language
English
Current Revision
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

IPC-6015 - Standard Only

Qualification & Performance Specification for Organic Multichip Module (MCM-L) Mounting & Interconnecting Structures

Document #:
IPC-6015
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1998
Language
English
Current Revision
Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

Moisture/Reflow Sensitivity Classification for Nonhermetic Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  02/03/2015
Language
English
IPC JEDEC J-STD-020 is used to determine what moisture-sensitivity-level (MSL) classification level should be used so that surface mount devices (SMDs) can be properly packaged, stored and handled to avoid subsequent thermal and mechanical damage during the assembly solder reflow attachment and/or repair operation. J-STD-020 covers components to be processed at higher temperatures for lead-free...
no-image-available

IPC-OI-645 - Standard Only

Standard for Visual Optical Inspection Aids

Document #:
IPC-OI-645
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Current Revision
Establishes requirements, definitions and certification provisions for optical inspection aids. Defines inspection grades to be used as accept/reject criteria for optical inspection aids. 40 pages. Released October 1993.

IPC-6012 - Revision D - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Standard Only
Released:  09/22/2015
Language
English
This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...
no-image-available

IPC/EIA-J-STD-028 - Standard Only

Performance Standard for Construction of Flip Chip and Chip Scale Bumps

Document #:
IPC/EIA-J-STD-028
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1999
Language
English
Current Revision
This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
no-image-available

IPC-MC-790 - Standard Only

Guidelines for Multichip Module Technology Utilization

Document #:
IPC-MC-790
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1992
Language
English
Current Revision
Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

IPC-CA-821 - Standard Only

General Requirements for Thermally Conductive Adhesives

Document #:
IPC-CA-821
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

IPC-9641 - Standard Only

High Temperature Printed Board Flatness Guideline

Document #:
IPC-9641
Revision
Original Version
Product Type
Standard Only
Released:  07/10/2013
Language
English
Current Revision
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

IPC-6013 - Revision D - Standard Only

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Standard Only
Released:  09/01/2017
Language
English
The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC/JEDEC-J-STD-609 - Revision B - Standard Only

Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes

Document #:
IPC/JEDEC-J-STD-609
Revision
B
Product Type
Standard Only
Released:  11/01/2016
Language
English
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...

IPC-9201 - Revision A - Standard Only

Surface Insulation Resistance Handbook

Document #:
IPC-9201
Revision
A
Product Type
Standard Only
Released:  09/19/2007
Language
English
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
no-image-available

IPC-QL-653 - Revision A - Standard Only

Certification of Facilities that Inspect/Test Printed Boards, Components & Materials

Document #:
IPC-QL-653
Revision
A
Product Type
Standard Only
Released:  11/01/1997
Language
English
This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.

IPC-6012 - Revision C - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
C
Product Type
Standard Only
Released:  04/13/2010
Language
English
Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

IPC/JEDEC-J-STD-033 - Revision C - Standard Only

Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-033
Revision
C
Product Type
Standard Only
Released:  08/01/2014
Language
English
Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-7095 - Revision A - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
A
Product Type
Standard Only
Released:  10/01/2004
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-6018 - Revision C - Standard Only

Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
C
Product Type
Standard Only
Released:  08/09/2016
Language
English
This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

IPC-6013 - Revision C - Standard Only

Qualification and Performance Specification for Flexible Printed Boards

Document #:
IPC-6013
Revision
C
Product Type
Standard Only
Released:  12/18/2013
Language
English
Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...
no-image-available

IPC/JEDEC-J-STD-609 - Revision A - Standard Only

IPC/JEDEC J-STD-609A Errata Information

Document #:
IPC/JEDEC-J-STD-609
Revision
A
Product Type
Standard Only
Released:  06/01/2012
Language
English
This is a list of reported errata to the printed copies of IPC/JEDEC J-STD-609A. Pen and ink changes should be made in accordance with your company's document control policies.
no-image-available

IPC-6012 - Revision D - Addendum with Amendment 1 - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum with amendment(s)
Released:  12/01/2018
Language
English
The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo y/o al proceso

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  02/18/2019
Language
Spanish
Current Revision
El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...
no-image-available

IPC-6012 - Revision F - Standard Only

リジッドプリント基板の認定および性能仕様

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  03/15/2024
Language
Japanese
Current Revision
本仕様書は、リジッドプリント基板(片面/両面基板、めっきスルーホールが有る/無い基板、ブラインドビア/ベリードビアが有る/無い多層基板)およびメタルコア基板の認定と性能について規定するものである。本仕様書では、表面処理と表面めっきコーティングに関する要求事項や、導体、ホール/ビア、受入試験頻度、品質適合性、また、電気的・機械的・環境的な要求事項についても触れている。改版F(リビジョンF)では、プリント基板のキャビティ、銅ラップめっき、中間対象ランド、はんだ付性試験、ディウェッティング、マイクロセクション評価、内層めっき部、絶縁間隙、マイクロビア構造の信頼性問題など、新規要件や追加要件が多く採用されている。本書はIPC-6011と併せて使用する。IPC-6012Eに優先する。
no-image-available

IPC-J-STD-020 - Revision F - Standard Only

非气密表面贴装器件（SMDs）的潮湿/再流焊敏感度分级

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  11/27/2023
Language
Chinese
Current Revision
IPC/JEDEC J-STD-020F标准旨在确定对湿气诱发应力敏感的非气密表面贴装器件（SMD）的潮湿敏感度分级，从而能够对其进行正确地包装、储存和操作，以避免其在再流焊连接和/或维修操作时受到损坏。 IPC/JEDEC J-STD-020F标准可用于确定非密封SMD鉴定应使用的分类级别。通过该测试方法中的标准本身不足以保证长期可靠性。根据JESD22-A113，本文件为SMD生成的湿度敏感度等级（MSL）用于确定预处理的浸泡条件，以及如何根据J-STD-033正确包装、储存和处理SMD，以避免在组装回流焊连接和/或维修操作期间损坏。 对于可能对过程敏感的IC器件，请参考J-STD-075，以确定是否需要PSL（过程敏感等级）分类。
no-image-available

IPC-6012 - Revision F - Standard Only

刚性印制板的鉴定及性能规范

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  04/01/2024
Language
Chinese
Current Revision
此标准涵盖了刚性印制板的鉴定和性能要求，印制板类型包括单/双面板、带或不带镀覆孔、带或不带盲孔/埋孔和金属芯的多层板。该规范涉及最终产品和表面处理涂敷要求、导体、通孔/过孔、验收测试频次和质量一致性以及电气、机械和环境要求。IPC-6012F新增和修订了一些印制板的要求，例如背钻孔结构，选择性表面处理，铜包覆电镀，印制板阶梯槽，中间目标连接盘，可焊性测试，显微切片分析，以及热冲击和基于性能测试的微导通孔结构的可靠性问题等。 IPC-6012F与IPC-6011一起使用，取代IPC-6012E。
no-image-available

IPC/JEDEC-J-STD-020 - Revision F - Standard Only

非密閉型表面実装部品(SMD)に関する吸湿/リフロー耐性の分類

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  08/16/2023
Language
Japanese
Current Revision
規格書「IPC/JEDEC J-STD-020F」は、吸湿によって誘発されるストレスに敏感な非密閉型SMD(表面実装組立用に設計されたもの)の分類水準を特定し、適切に梱包/保管および取り扱うことで、組立品のはんだリフロー接続やリペア作業工程中の損傷を回避することを目的としている。 規格書「IPC/JEDEC J-STD-020F」は、非密閉型SMDの認定にあたり、どの分類水準を適用すべきかを判断する場合に使用してもよい。なお、長期的な信頼性を保証するにはこの試験方法の基準に合格するだけでは不十分である。本書によって判定されるSMDの吸湿耐性水準(MLS)評価は、JESD22-A113による事前処理のためのソーク条件や、J-STD-033による組立のはんだリフロー接続および/またはリペア作業工程中の損傷回避を目的とした、SMDの適切な梱包/保管/取扱い方法を決定する場合に利用される。...
no-image-available

IPC-6013 - Revision E - Standard Only

挠性和刚挠印制板的鉴定及性能规范

Document #:
IPC-6013
Revision
E
Product Type
Standard Only
Released:  05/31/2022
Language
Chinese
Current Revision
涵盖根据 IPC-2221 和 IPC-2223 设计的挠性印制板的鉴定和性能要求。 挠性印刷板可以是单面、双面、多层或刚挠性多层。所有这些结构都可以包括增强板、镀覆孔、微导通孔和盲孔/埋孔。 修订版 E 包含了对最终涂覆、刚挠过渡区、外来夹杂物、表面贴装焊盘异常、电镀内层、褶皱、折痕和吸管状空隙等形变异常，标记，重合度（孔环），导体厚度减小，孔壁介质去除，树脂去除，微孔填镀和孔选择性（钮扣）镀等、铜填充通孔结构微导通孔结构的新增和更新要求。
no-image-available

IPC-7095 - Revision D - Standard with Amendment 1

ボールグリッドアレイ(BGA)の設計および組立プロセスの実施 – 改訂版1

Document #:
IPC-7095
Revision
D
Product Type
Standard with amendment(s)
Released:  06/17/2020
Language
Japanese
Current Revision
IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。
no-image-available

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

感湿性部品、リフロー/プロセス感応性部品の取扱い、梱包、出荷および使用

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  09/21/2021
Language
Japanese
Current Revision
IPC/JEDEC J-STD-033Dは、感湿性部品、リフロー感応性部品の取扱い、梱包、出荷および使用に関し、標準化された方法を製造者およびユーザーに提供することを目的としている。これらの方法は、生産収量や信頼性の低下、および部品の劣化につながる可能性のある、吸湿およびはんだリフロー温度にさらされることによる損傷を回避するために提供するものである。IPC/JEDEC J-STD-033Dで定義するドライパッキングの手順を適切に実施することにより、封止日から最低でも12か月間のシェルフライフが可能となる。本書はIPCおよびJEDECにより作成された。
no-image-available

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

非密閉型表面実装部品に関する吸湿/リフロー耐性の分類

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  09/21/2021
Language
Japanese
Current Revision
IPC JEDEC J-STD-020は、表面実装部品(SMD)の吸湿耐性水準(MSL)の分類水準を特定し、適切にパッケージ化および保管され、また取り扱われることで、組立のはんだリフロー接続および/またはリペア作業中の熱的/機械的損傷を回避することを目的としている。J-STD-020は、高温による鉛フリーはんだ、および低温によるSnPbはんだの各組立で取り扱われる部品を対象としている。 このリビジョンでは適用範囲および用途における一貫性を確保するため、規格書内の多くの領域で明確な説明が追加された。本書では、ポリマー層のあるベアダイおよび非ICパッケージの使用に関する考慮事項について触れている。なお本書(リビジョンE)では、分類温度 (Tc)、パッケージの体積、乾燥重量の特性評価、時間間隔の特性を考慮した乾燥重量の決定方法についても明確にし、最新情報を記載している。また...
no-image-available

IPC-6012 - Revision E - Standard Only

Qualifikation und Leistungsspezifikation für starre Leiterplatten

Document #:
IPC-6012
Revision
E
Product Type
Standard Only
Released:  08/11/2020
Language
German
Current Revision
Die Spezifikation IPC-6012E-DE behandelt die Qualifikation und Leistungsspezifikation starrer Leiterplatten und umfasst einseitige und zweiseitige Leiterplatten mit/ohne metallisierte(n) Löcher(n) und Multilayer-Leiterplatten mit/ohne Sacklöcher(n) und nicht-durchgehende(n) Verbindungslöcher(n) sowie Metallkern-Leiterplatten. Sie behandelt Anforderungen an Endoberflächen und...
no-image-available

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

潮湿、再流焊和工艺敏感器件的操作、包装、运输及使用

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
本文件的目的是，针对潮湿、再流焊和工艺敏感器件，向生产商和用户提供标准的操作、包装、运输及使用方法。所提供的这些方法可避免由于吸收湿气和暴露在再流焊温度下造成的封装损伤，这些损伤会导致合格率和可靠性的降低。一旦正确执行IPC/JEDEC J-STD-033D，这些工艺可以提供从密封时间算起12个月的最短保质期。由IPC和JEDEC开发。

IPC-SM-840 - Revision E - Standard Only

永久性阻焊剂和挠性覆盖材料的鉴定和性能规范

Document #:
IPC-SM-840
Revision
E
Product Type
Standard Only
Released:  11/20/2012
Language
Chinese
Current Revision
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

Clasificación de la sensibilidad a la humedad / reflujo de dispositivos de montaje superficial no herméticos

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  07/12/2018
Language
Spanish
Current Revision
Se utiliza el IPC JEDEC J-STD-020 para determinar que nivel de clasificación del nivel de sensibilidad a la humedad (MSL) se debería utilizar de tal manera que los dispositivos de montaje superficial (SMDs) se puedan correctamente embalar, almacenar y manipular con el fin de evitar daños durante las operaciones de soldadura por reflujo en el ensamble y/o retrabajo. El J-STD-020 cubre tanto...
1-75 of 154

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards