Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-MS-810 - Standard Only

Guidelines for High Volume Microsection

Document #:
IPC-MS-810
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

IPC-9631 - Standard Only

User Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

Document #:
IPC-9631
Revision
Original Version
Product Type
Standard Only
Released:  12/15/2010
Language
English
IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

IPC-7094 - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die Size Components

Document #:
IPC-7094
Revision
Original Version
Product Type
Standard Only
Released:  03/18/2009
Language
English
Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...
no-image-available

IPC/JEDEC-J-STD-035 - Standard Only

Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components

Document #:
IPC/JEDEC-J-STD-035
Revision
Original Version
Product Type
Standard Only
Released:  04/01/1999
Language
English
This test method defines the procedures for performing acoustic microscopy on non-hermetic encapsulated electronic components. It provides users with an acoustic microscopy process flow for detecting defects non-destructively in plastic packages while achieving reproducibility. Developed by IPC and JEDEC. 16 pages. Released April 1999. Equivalent to IEC Publicly Available Specification (PAS) 62191

IPC-7093 - Standard Only

Design and Assembly Process Implementation for Bottom Termination Components

Document #:
IPC-7093
Revision
Original Version
Product Type
Standard Only
Released:  03/28/2011
Language
English
This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive...

IPC-6017 - Standard Only

Qualification and Performance Specification for Printed Boards Containing Embedded Passive Devices

Document #:
IPC-6017
Revision
Original Version
Product Type
Standard Only
Released:  03/19/2009
Language
English
This new standard supplements existing IPC-6010 series specifications with qualification and performance requirements for in-process and finished printed boards containing embedded passive circuitry (distributive capacitive planes and capacitive or resistive components). 10 pages. Released March 2009. Included in Collections C-105, C-1000 and the 6010 Series

IPC-7091 - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
Original Version
Product Type
Standard Only
Released:  09/25/2017
Language
English
The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...
no-image-available

IPC-6012 - Revision D - Redline Standard

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Redline Standard
Released:  10/30/2015
Language
English
Track the substantive changes in IPC-6012D with this redline product. This is the D revision in its entirety, with each change highlighted on the page. Click the text to launch a pop-up with an explanation of the change from the C revision. Available for download only. IPC-6012D covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without...
no-image-available

IPC-7092 - Standard Only

Design and Assembly Process Implementation for Embedded Components

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  02/18/2015
Language
English
This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...

IPC-2231 - Standard Only

DFX Guidelines

Document #:
IPC-2231
Revision
Original Version
Product Type
Standard Only
Released:  05/14/2019
Language
English
The IPC-2231 standard provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed board assemblies that utilize surface mount and through hole devices.

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC-6012 - Revision E - Addendum - Automotive

リジッドプリント板の認定および性能仕様車載用途向け追加規格

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  06/14/2022
Language
Japanese
Current Revision
購入仕様書/図面でIPC-6012EA追加規格の適用を要求される場合、本追加規格は、振動および熱サイクル環境に耐えることが求められるリジッドプリント板に対し、IPC-6012E-リビジョンEに記載する具体的な特定要件を補完する、もしくは置き換えるものである。今回の本文書の改訂では、次の要求事項への更新が行われた：ランド浮き、パターン形状精度、絶縁体除去(例：ウィッキング)、ソルダマスク厚さ、清浄度、適合性と信頼性試験。
no-image-available

IPC-6012 - Revision F - Addendum - Space and Military

刚性印制板的鉴定及性能规范航天和军事航空应用补充标准

Document #:
IPC-6012
Revision
F
Product Type
Addendum
Released:  04/10/2025
Language
Chinese
Current Revision
IPC-6012FS 航天补充标准为 IPC-6012F 航天和军事航空应用提供了 IPC 3 级性能等级要求的例外情况。例外情况包括更改验收标准和/或样品大小以及生产批次验收测试的测试频率。IPC-6012FS 涵盖了刚性印制板在太空旅行环境中承受振动、极端热循环和静态地面测试的要求。取代 IPC-6012ES。
no-image-available

IPC-6012 - Revision E - Addendum - Automotive

刚性印制板的鉴定及性能规范汽车应用补充标准

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  06/14/2022
Language
Chinese
Current Revision
IPC-6012EA 附录在采购文件/图纸要求时，补充或替代 IPC-6012E 修订版 E 的明确要求，适用于必须经受住汽车行业电子互连的振动和热循环环境的刚性印制板。 本文档的修订更改包括对提升焊盘、图案特征精度、电介质去除（例如芯吸）、阻焊层厚度、清洁度和适用性以及可靠性测试参数的更新要求。
IPC-6012EM CN Cover

IPC-6012 - Revision E - Addendum - Medical

刚性印制板的鉴定及性能规范IPC-6012E医疗应用补充标准

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  07/28/2021
Language
Chinese
Current Revision
采购文档/图纸要求时，IPC-6012EM附录可补充或替代IPC-6012E的特定标识要求，这些要求适用于必须满足高可靠性医疗设备应用要求的刚性印制板。 IPC-6012EM是医疗行业唯一针对刚性印制板的资格和性能规格的全球行业共识标准。
no-image-available

IPC-6012 - Revision E - Addendum - Space and Military

リジッドプリント板の認定および性能仕様宇宙・軍用アビオニクス用途向け追加規格

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  01/18/2021
Language
Japanese
Current Revision
IPC-6012ES 宇宙用途向け追加規格では宇宙および軍用アビオニクス製品に適用される、IPC-6012Eのクラス3要件への例外事項を示している。これら例外事項には、生産ロット受入れ試験に関する許容基準やサンプルサイズおよび試験頻度などへの変更が含まれる。
no-image-available

IPC-6012 - Revision E - Addendum - Space and Military

刚性印制板的鉴定及性能规范航天和军事航空应用补充标准

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  11/20/2020
Language
Chinese
Current Revision
IPC-6012ES附录为用于太空和军用航空电子产品的IPC-6012E的3类要求提供了例外。 例外情况包括对生产批次验收测试的验收标准和/或样本大小以及测试频率的更改。 IPC-6012ES涵盖了刚性印刷电路板的要求，以抵抗振动，极端热循环以及与太空旅行环境相关的地面测试。

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。

IPC-6012 - Revision D - Addendum - Automotive

Ergänzung für Anwendungen der Automobilbranche zu IPC-6012D-DE Qualifikation und Leistungsspezifikation für starre Leiterplatten

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  01/26/2017
Language
German
Current Revision
Diese Ergänzung modifiziert oder ersetzt, falls in der Beschaffungsdokumentation oder den Zeichnungen gefordert, spezielle Anforderungen von IPC-6012D-DE für starre Leiterplatten, die Vibrationen und thermische Zyklen in den Umgebungsbedingungen für elektronische Verbindungen in der Automobilbranche überstehen müssen. Erschienen im April 2016. Übersetzt im September 2016.

IPC-6012 - Revision D - Addendum - Automotive

刚性印制板的鉴定及性能规范汽车要求附件

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  11/18/2016
Language
Chinese
Current Revision
简要介绍 （英文） 当采购文件/图纸有要求时，本附件补充或替代IPC-6012D中的特殊鉴定要求，以确保汽车行业的印制板的可靠性可以经受住振动和热循环环境下的电气连接。2016年4月发布。2016年8月翻译

IPC-6012 - Revision D - Addendum - Space and Military

Adición de aplicaciones de aviónica militar y espacial del IPC-6012D, Clasificación y especificación de rendimiento para los tableros impresos rígidos

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  11/18/2016
Language
Spanish
Current Revision
Esta adición suplementa o reemplaza específicamente identificado requisitos del IPC-6012D, revisión D, para los tableros impresos rígidos que tienen que sobrevivir a la vibración, ensayos/pruebas en tierra y ambientes cíclicos térmicos de espacio y aviónica militar.

IPC-6012 - Revision D - Addendum - Space and Military

Avenant pour les Applications Spatiales et Aéronautiques Militaires de l’IPC-6012D, Spécification de la Qualification et des Performances des Circuits Imprimés Rigides

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  06/09/2016
Language
French
Current Revision
Cet Avenant complète ou remplace les exigences de l’IPC-6012D, version D, spécifiquement identifiées pour les circuits imprimés rigides qui doivent supporter les environnements de vibration, de contrôle sur le terrain et de cyclage thermique du spatial et de l'aéronautique militaire.

IPC-6012 - Revision D - Addendum - Space and Military

Ergänzung zu IPC-6012D-DE Qualifikation und Leistungsspezifikation für starre Leiterplatten für Raumfahrt-Anwendungen

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  12/15/2015
Language
German
Current Revision
Diese Ergänzung ergänzt oder ersetzt spezielle Anforderungen in IPC-6012D-DE, Ausgabe D für starre Leiterplatten, die Vibrationen, Bodentests und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischer Luftfahrt bestehen müssen.

IPC-T-50 - Revision H - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
H
Product Type
Standard Only
Released:  09/17/2009
Language
Chinese
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
101-125 of 154

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards