Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Kablo ve Kablo Takımları için Kabul Gereklilikleri

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  11/12/2014
Language
Turkish
Current Revision
Revizyon B, Kablo ve Kablo Takımlarının Kabul Gereklilikleri için endüstrinin ortak dökümanı olmayı sürdürmektedir. IPC ile Kablo Takımları Üreticileri Birliği (WHMA), bu önemli güncellemeyi geliştirmek için beraber çalışmışlardır. YENİ! Dolgu, kalıplı dolgu, ekleme, yalıtkan desteği olmayan krimp kontakları, sıralı yalıtkan yer değiştirme konnektörleri, konnektör bağlantısı, sert ve uyumlu kablo...

IPC/WHMA-A-620 - Revision C - Standard Only

דרישות וקבלה של הרכבות כבלים ורתמות חוטים

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/18/2018
Language
Hebrew
Current Revision
תאור זוהי המהדורה העדכנית ביותר של תקן מוסכם לתעשייה ודרישות קבלה של הרכבות כבלים ורתמות חוטים. תקן זה כולל סעיפים חדשים לאבטחת חיווט, אבטחת בידודים ומידע מעודכן ברבים מהסעיפים, יחד עם למעלה מ- 700 תמונות ואיורים. תקן זה מפרט חומרים שיטות בדיקות וקריטריוני קבלה לייצור בלחיצה, אבטחה מכאנית וחיבורים מולחמים להרכבות ופעולות הקשורות להרכבת כבלים וחיווט. IPC/WHMA-A-620C תוכנן על ידי IPC והאיגוד לייצור...

IPC/WHMA-A-620 - Revision C - Standard Only

Kábel- és huzalköteg-szerelvények követelményei és elfogadása

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  04/12/2019
Language
Hungarian
Current Revision
Az egyetlen ipari konszenzuson alapuló huzal és vezeték szerelvényekkel kapcsolatos követelményeket és elfogadási kritériumokat tartalmazó szabvány legújabb verziója. Új alfejezetekkel egészültek ki a biztosítóhuzallal, biztosítósodronnyal, tömítőgyűrűkkel és kábelcsatornákkal kapcsolatos részek és a szabvány számos fejezete frissítésre került. Több mint 700 fotóval és illusztrációval ez a...
no-image-available

IPC-9204 - Standard Only

印刷电子柔性与可拉伸性能测试指南

Document #:
IPC-9204
Revision
B
Product Type
Standard Only
Released:  06/18/2019
Language
Chinese
Current Revision
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
no-image-available

IPC-6018 - Revision C - Standard Only

高频（微波）印制板的鉴定及性能规范

Document #:
IPC-6018
Revision
C
Product Type
Standard Only
Released:  04/11/2019
Language
Chinese
Current Revision
本规范涵盖了高频（微波）印制板鉴定和性能要求，包括有或无镀覆孔的单面板、双面板、含或不含埋孔/盲孔及金属芯的多层板。该标准涉及最终涂覆层和表面电镀涂覆层要求、导体、通孔/导通孔、验收测试的频次和质量一致性、电气与机械及环境要求。C版本在诸如HASL涂层、可选的表面镀层、边缘电镀、标记、微导通孔捕获和目标连接盘、铜盖覆电镀填塞孔、铜填充微孔、PTFE钻污和介质去除等领域中加入了许多新的要求。与IPC-6011一起使用。取代IPC-6018B和IPC-6016。 2017年12月翻译。
no-image-available

IPC-9691 - Revision B - Standard Only

IPC-TM-650 测试方法2.6.25耐导电阳极丝（CAF）及其他内部电化学迁移（ECM）测试用户指南

Document #:
IPC-9691
Revision
B
Product Type
Standard Only
Released:  04/11/2018
Language
Chinese
Current Revision
本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上
no-image-available

IPC-9704 - Revision A - Standard Only

印制板应变测试指南

Document #:
IPC/JEDEC-9704
Revision
A
Product Type
Standard Only
Released:  02/01/2026
Language
Chinese
Current Revision
本文件对印制板（PWB）制造过程中印制板组件的应变测试制定了详细的指南，这些制造过程包括组装、测试、系统集成及印制板的周转/运输。 本文件建议的程序使印制板组装厂能够独立进行所要求的应变测试，并为印制板翘曲测量和风险等级评估提供了量化的方法。
no-image-available

IPC-7530 - Revision A - Standard Only

群焊工艺温度曲线指南（再流焊和波峰焊

Document #:
IPC-7530
Revision
A
Product Type
Standard Only
Released:  05/29/2019
Language
Chinese
Current Revision
本标准的目的是为开发温度曲线提供有效和实用的信息，以生产可接受的锡铅和无铅的电子组件。该修订版将原来标准的重点从再流温度曲线扩展到包括激光焊曲线、选择焊曲线、波峰焊曲线或其他焊接曲线。该修订版还包括一个全彩色故障排除指南，用于解决可归因于分析的常见缺陷。

IPC-6012 - Revision B - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
B
Product Type
Standard Only
Released:  09/18/2008
Language
Swedish
Current Revision
Download the free Amendment 2 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. This is the Swedish Language version of IPC-6012B. This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal...
IPC-6018DS

IPC-6018 - Revision D - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6018D, Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
D
Product Type
Addendum
Released:  08/04/2022
Language
English
The IPC-6018DS addendum supplements or replaces specifically identified requirements of IPC-6018D, for high frequency (microwave) printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics. The IPC-6018DS addendum incorporates new requirements in areas such as copper wrap plating, dewetting, pad/land anomalies, copper cap plating...

IPC-6012 - Revision E - Amendment 1

刚性印制板的鉴定及性能规范- 修订本1

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  10/28/2022
Language
Chinese
Current Revision
IPC-6012E-AM1是IPC-6012E的修订本，澄清了再流焊SnPb或HASL镀层中退润湿和焊料回缩之间的区别。 该修订本还为成品印制板的最小外部导体厚度提供了修订标准，并为内部电镀层的最小厚度提供了新的接受标准。

IPC/WHMA-A-620 - Revision D - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620D

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Addendum
Released:  10/07/2020
Language
English
IPC/WHMA-A-620D-S space addendum provides additional requirements to IPC/WHMA-A-620D standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620D-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-6012 - Revision D - Addendum - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  04/01/2016
Language
English
This Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry.
no-image-available

IPC-6012 - Revision D - Amendment 1

Sert Baskı Devre Kartları İçin Kalifikasyon ve Performans Spesifikasyonu

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  01/25/2019
Language
Turkish
Current Revision
Bu döküman; kaplı delikiçine sahip olan veya olmayan tek yüzlü, çift yüzlü baskı devre kartları ve kör/gömülü geçiş deliklerine sahip olan veya olmayan çok katmanlı baskı devre kartları ile metal çekirdekli kartları içeren sert baskı devre kartlarının kalifikasyonunu ve performansını kapsamaktadır. Son kaplama ve yüzey kaplama gereklilikleri, iletkenler, delikler/geçiş delikleri, kabul testlerinin...

IPC-6012 - Revision D - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum
Released:  09/22/2015
Language
English
This Addendum supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics

IPC/WHMA-A-620 - Revision C - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  03/30/2018
Language
English
IPC/WHMA-A-620C-S provides additional requirements to IPC/WHMA-A-620C to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620C-S space addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620C.
no-image-available

IPC/WHMA-A-620 - Revision B - Addendum - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620B

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Addendum
Released:  06/01/2013
Language
English
When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision B, providing additional requirements to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The required IPC training & certification...
no-image-available

IPC-A-620 - Revision A - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Addendum
Released:  07/16/2012
Language
English
IPC/WHMA-A-620AS with Amendment 1 Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A Requirements and Acceptance for Cable and Wire Harness Assemblies. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A of July 2006 by providing additional requirements to ensure the...

IPC-6018 - Revision C - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6018C Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
C
Product Type
Addendum
Released:  08/09/2016
Language
English
This Addendum supplements or replaces specifically identified requirements of IPC-6018C, for high frequency (microwave) printed boards that must survive the vibration, ground testing and thermal cyclic environments of space and military avionics.

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
no-image-available

IPC-HDBK-9798 - Handbook

Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-HDBK-9798
Revision
Original Version
Product Type
Handbook
Released:  06/21/2022
Language
English
Current Revision
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.

IPC-9797 - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2020
Language
English
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...

IPC-8497 - Standard Only

Cleaning Methods and Contamination Assessment for Optical Assembly

Document #:
IPC-8497
Revision
Original Version
Product Type
Standard Only
Released:  12/01/2005
Language
English
This standard describes the methods of inspecting and cleaning all optical interfaces so that interconnectivity integrity of the optical signal is maintained. The information provided focuses on techniques and methods to accomplish maximum quality of the interface and describes methods of contamination prevention. The target audience for this standard are Manufacturing Operators, Manufacturing...
no-image-available

IPC-MS-810 - Standard Only

Guidelines for High Volume Microsection

Document #:
IPC-MS-810
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

IPC-9631 - Standard Only

User Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

Document #:
IPC-9631
Revision
Original Version
Product Type
Standard Only
Released:  12/15/2010
Language
English
IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...
151-175 of 286

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards