Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-D-620A Cover Image

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Released:  02/28/2022
Language
English
Current Revision
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
IPC-7091A Cover Image

IPC-7091A - Revision A - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the effects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC-8911 - Standard Only

Requirements for Conductive Yarns for E-Textiles Applications

Document #:
IPC-8911
Revision
Original Version
Product Type
Standard Only
Released:  05/27/2025
Language
English
Current Revision
This standard identifies categories and establishes a designation system and qualification/quality conformance requirements and test methods for conductive yarns used in e-textiles. The standard enables suppliers of conductive yarns to demonstrate their products’ performance against real-world processing and end-use environments, leveraging eight IPC Test Methods developed specifically for...
IPC-8401 Cover Image

IPC-8401 - Standard Only

Guidelines for In-Mold Electronics

Document #:
IPC-8401
Revision
Original Version
Product Type
Standard Only
Released:  10/22/2024
Language
English
Current Revision
IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...
no-image-available

IPC-8981 - Standard Only

Quality and Reliability of E-Textile Wearables

Document #:
IPC-8981
Revision
Original Version
Product Type
Standard Only
Released:  04/10/2025
Language
English
Current Revision
This standard defines classification levels and testing thresholds to assess the reliability of e-textile wearables in their intended end-use environments. It establishes baseline criteria for evaluating durability under mechanical stressors—such as abrasion, flexing, and UV exposure—and environmental conditions including perspiration, washing, water/saltwater, alkalis, and acids. Supported by 14...

IPC-8921 - Standard Only

Requirements for Woven and Knitted Electronic Textiles (E-Textiles) Integrated with Conductive Fibers, Conductive Yarns and/or Wires

Document #:
IPC-8921
Revision
Original Version
Product Type
Standard Only
Released:  12/05/2019
Language
English
Current Revision
The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classifications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and definitions for...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Language
English
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-7091 - Revision A - Standard Only

3D(三次元)部品の設計および組立プロセスの実施

Document #:
IPC-7091
Revision
A
Product Type
Standard Only
Released:  11/04/2024
Language
Japanese
Current Revision
本書では、3D部品の技術を実施する際の設計/組立の課題や、課題への対処方法について述べる。ケースに収納されていない複数の半導体ダイ素子を単一パッケージのフォーマットに組み合わせる効果を考える場合、その影響は個々の部品特性にも、これまでの組立手法にも及ぶ。本規格に含まれる情報は、3D半導体パッケージの組立とプロセスに関連する最適な機能性、工程評価、最終製品の信頼性とリペアの諸問題の解決に向け焦点を当てたものである。

IPC-D-620 - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
Original Version
Product Type
Standard Only
Released:  12/08/2015
Language
English
IPC-D-620 provides design and critical process requirements for the three product classes of cable and wire harness assemblies as well as military/space applications. It is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum Three white papers are included to provide guidance on key topics...

IPC-7091 - Standard Only

Design and Assembly Process Implementation of 3D Components

Document #:
IPC-7091
Revision
Original Version
Product Type
Standard Only
Released:  09/25/2017
Language
English
The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。

IPC-T-50 - Revision H - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
H
Product Type
Standard Only
Released:  09/17/2009
Language
Chinese
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
no-image-available

IPC-8921 - Standard Only

集成导电纤维、导电纱和/或导电线的机织型和针织型电子织物(E-Textiles) 的要求

Document #:
IPC-8921
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2021
Language
Chinese
Current Revision
IPC-8921标准提供并定义了工业测试方法和指南，以提供与导电纤维、导电纱和/或导线相结合的机织和针织型电子织物的关键特性和耐久性的性能数据。 IPC-8921标准还提供了机织和针织电子纺织品、纤维、纱线和电线的经典说明，并包括20个新的电子纺织品术语和定义。
no-image-available

IPC-D-620 - Standard Only

线缆及线束组件的设计与关键工艺要求

Document #:
IPC-D-620
Revision
Original Version
Product Type
Standard Only
Released:  03/24/2022
Language
Chinese
Current Revision
IPC-D-620 为线缆和线束组件以及军事/航空应用的三个产品类别提供了设计与关键工艺要求。 它是 IPC/WHMA-A-620“线缆及线束组件的要求与验收”及其相关航空附录的设计要求伴侣 包括三份白皮书，为标准中讨论的关键主题提供指导。 这些是： IPC-WP-113, Guidance for the Development and Implementation of a Red Plague Control Plan (RPCP) IPC-WP-114, Guidance for the Development and Implementation of a White Plague Control Plan (WPCP) IPC-WP-116, Guidance for the Development and Implementation of a Foreign Object...
1-21 of 21

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards