Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-8401 Cover Image

IPC-8401 - Standard Only

Guidelines for In-Mold Electronics

Document #:
IPC-8401
Revision
Original Version
Product Type
Standard Only
Released:  10/22/2024
Language
English
Current Revision
IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...
IPC-5262 Cover Image

IPC-5262 - Standard Only

Design, Critical Process and Acceptance Requirements for Polymeric Applications

Document #:
IPC-5262
Revision
Original Version
Product Type
Standard Only
Released:  10/17/2022
Language
English
Current Revision
The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

IPC-A-610 - Revision F - Standard Only

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Standard Only
Released:  08/28/2014
Language
English
IPC-A-610F Amendment 1 is now available. See Related items. IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610F illustrates industry-accepted workmanship criteria for electronics assemblies through detailed statements reflecting acceptable and defect conditions, supported by full-color photographs and...
no-image-available

IPC-A-610 - Revision E - Standard Only

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
E
Product Type
Standard Only
Released:  04/13/2010
Language
English
IPC-A-610 is the most widely used electronics assembly standard in the world. A must for all quality assurance and assembly departments, IPC-A-610E illustrates industry-accepted workmanship criteria for electronics assemblies through full-color photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for...

IPC-S-816 - Standard Only

SMT Process Guideline Checklist

Document #:
IPC-S-816
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1993
Language
English
Current Revision
Why waste time looking for answers? This handy, easy-to-use troubleshooting guide lists all types of processing problems and solutions for surface mount assembly. Covers bridging, skips, misalignment, placement and more. 38 pages. Released July 1993.
no-image-available

IPC/EIA-J-STD-026 - Standard Only

Semiconductor Design Standard for Flip Chip Applications

Document #:
IPC/EIA-J-STD-026
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1999
Language
English
Current Revision
This standard addresses semiconductor flip chip design requirements. Provides information for using standard semiconductor substrates, materials, assembly and test methods with established fabrication, bumping, test and handling practices. Electrical, thermal and mechanical chip design parameters and methodologies are covered in the standard, as well as the reliability aspects associated with...

ECA/IPC/JEDEC-J-STD-075 - Standard Only

Classification of Non-IC Electronic Components for Assembly Processes

Document #:
ECA/IPC/JEDEC-J-STD-075
Revision
Original Version
Product Type
Standard Only
Released:  09/03/2008
Language
English
Current Revision
J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an...

IPC-SM-780 - Standard Only

Component Packaging & Interconnecting with Emphasis on Surface Mounting

Document #:
IPC-SM-780
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1988
Language
English
Current Revision
This document examines key issues in advanced packaging techniques. Provides information on what types of parts are available, the techniques and processes necessary for their proper use, possible advantages/disadvantages or problems, how to start implementation and where to find additional information. 138 pages. Released March 1988.
no-image-available

JEDEC/IPC-JP002 - Standard Only

JEDEC/IPC Current Tin Whiskers Theory and Mitigation Practices Guideline

Document #:
JEDEC/IPC-JP002
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2006
Language
English
Current Revision
This document will provide insight into the theory behind tin whisker formation as it is known today and, based on this knowledge, potential mitigation practices that may delay the onset of, or prevent tin whisker formation. The potential effectiveness of various mitigation practices will also be briefly discussed. References behind each of the theories and mitigation practices are provided. It...

IPC-J-STD-001 - Revision E - Standard Only

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
E
Product Type
Standard Only
Released:  04/13/2010
Language
English
J-STD-001E is recognized worldwide as the sole industry-consensus standard covering soldering materials and processes. This revision includes support for lead free manufacturing, in addition to easier to understand criteria for materials, methods and verification for producing quality soldered interconnections and assemblies. The requirements for all three classes of construction are included...

IPC-J-STD-001 - Revision F - Standard Only

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Standard Only
Released:  08/28/2014
Language
English
IPC J-STD-001F is recognized worldwide as the sole industry-consensus standard covering soldering materials and processes. This revision includes support for both traditional solder alloys and for lead-free manufacturing. Examples of some of the significant changes are revision to plated-through hole, PTH, minimum fill requirements; criteria for two new SMT termination types; and expanded...

EIA/IPC/JEDEC-J-STD-002 - Revision D - Standard Only

Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

Document #:
EIA/IPC/JEDEC-J-STD-002
Revision
D
Product Type
Standard Only
Released:  06/24/2013
Language
English
This standard prescribes test methods, defect definitions, acceptance criteria, and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs and tabs. A test method for the resistance to dissolution/dewetting of metallization is also included in the standard. Intended for use by both vendors and users, J-STD-002D was developed by...

IPC-J-STD-001 - Revision D - Standard Only

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
D
Product Type
Standard Only
Released:  02/01/2005
Language
English
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! Space Applications Electronic Hardware Addendum Published November 2006, with Amendment 1 Published September 2009. Download the Addendum. J-STD-001D is...

IPC-FA-251 - Standard Only

Guidelines for Assembly of Single- & Double-Sided Flex Circuits

Document #:
IPC-FA-251
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1992
Language
English
Current Revision
Guidelines for the assembly of components and mounting hardware to single- and double-sided flexible printed wiring. These guidelines describe the type of materials and processes that may be used to accomplish proper electronic assembly. 30 pages. Released February 1992.
no-image-available

IPC-A-610 - Revision D - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
D
Product Type
Standard with amendment(s)
Released:  02/01/2005
Language
English
Download the free Amendment 1 (.pdf) that resolves conflict in measles criteria between J-STD-001D, IPC-A-610D, IPC-6012B and IPC-A-600G. Lead free acceptance criteria and pictures now included! Reformatted-easier to find acceptance criteria! IPC-A-610 Telecom Addendum Published August 2009. Download the Telecom Addendum. When specifically required by procurement documentation, this Addendum...

IPC-7621 - Standard Only

Guideline for Design, Material Selection and General Application of Encapsulation of Electronic Circuit Assembly by Low Pressure Molding with Thermoplastics

Document #:
IPC-7621
Revision
Original Version
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...
no-image-available

IPC-TP-1114 - Technical Paper

The Layman's Guide to Qualifying a Process to J-STD-001

Document #:
IPC-TP-1114
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1998
Language
English
Current Revision
Originally developed for J-STD-001B, it is also applicable to current assembly standards. Electronics manufacturers are faced with the difficult task of proving that a candidate manufacturing process can produce acceptable hardware, either to the customer of the product, or for internal quality control. Users have to determine many of the process qualification steps on their own. This document...
no-image-available

IPC-1331 - Standard Only

Voluntary Safety Standard for Electrically Heated Process Equipment

Document #:
IPC-1331
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2000
Language
English
Current Revision
This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.

IPC-7711/21 - Revision C - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  02/01/2017
Language
English
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.

IPC-7912 - Revision A - Standard Only

End-Item DPMO for Printed Circuit Board Assemblies

Document #:
IPC-7912
Revision
A
Product Type
Standard Only
Released:  01/01/2004
Language
English
Finally - an end to the confusion when calculating defect opportunities for benchmarking! For customers and manufacturers, it seems like every company has a unique way of calculating defects and then reporting on quality. In a complex electronics assembly operation, is it best to calculate using the number of components? The number of leads? What about solder joints? How can companies calculate...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。
no-image-available

IPC-J-STD-006 - Revision B - Standard with Amendments 1 & 2

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
B
Product Type
Standard with amendment(s)
Released:  10/22/2009
Language
English
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
51-75 of 412

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards