The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
Products
IPC/WHMA-A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620F describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...
The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.
The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...
IPC-7526A handbook addresses understencil cleanliness during stencil printing, removal of solder paste from stencils following the cleaning process and misprint PCB board cleaning considerations.
Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...
The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...
While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...
This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.
The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...
The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...
The IPC-9709A standard guideline document establishes an Acoustic Emission (AE) method to enhance evaluation of the performance and reliability of surface mount attachments of electronic assemblies during mechanical loading.
Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.
This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017
This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing to evaluate the effects of mechanical stress, laminate material fracturing, ionic contamination, moisture...
The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
IPC/WHMA-A-620F-RL is a redline document showing the difference from IPC/WHMA-A-620E to IPC/WHMA-A-620F. IPC/WHMA-A-620F-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed/moved text in the IPC/WHMA-A-620E pages and new/revised/moved text in the IPC/WHMA-A-620F pages. This is a visual tool showing the changes as a...
IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
IPC-8401 standard provides guidelines for In-Mold Electronics (IME) manufacturing processes, part structures, candidate materials, and production test methods. In-Mold Electronics integrates printed electronics and electrical components into injection molded plastics, creating a three-dimensional smart molded structure. IME technology uses mass production processes, materials, and components. IME...
Tackling PCB cleanliness is a tough job; residues on printed circuit boards are directly related to the reliability of the produced hardware and can result in serious failures if not known or monitored. But how do you measure "cleanliness"? How clean is "clean"? The IPC-5701 provides guidance into how these issues should be approached and specified in purchasing documents, addressing levels of...
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...
The IPC-9505 standard provides details of test methodologies for cleaning chemistry compatibility with electronic assembly materials that replace those in MIL-STD-202 Method 215 for testing electronic and electrical components such as capacitors, resistors, transformers and inductors. The test methods can also be used, when applicable, to parts not covererd by military specifications or drawings
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
Provides information on design characteristics and the application of solderless surface mount connectors, including conductive adhesives to aid IC package and board interconnection. 34 pages. Released January 1994.
Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...
Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...
The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.
This publication is intended to characterize the frature strength of a component's board level-interconnect by providing a common method of establishing the fracture resistance to flexural loading that may occur during conventional non-cyclic board assembly and test operations. The document is applicable to surface mount components attached to printed wiring boards using conventional solder reflow...
IPC-8701 presents acceptance guidelines for the solar panel in final module assembly. The intent of this standard is to cover crystalline solar modules.Some of the content may be applicable to other photovoltaic modules such as thin film. The standard reviews and includes acceptance guidelines for incoming and finished frames, frame assembly, sealant, tape, junction box assembly, and bus bar...
This redline provides a side-by-side comparison the changes from Revision C to Revision D of IPC-7711/21.
This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.
This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...
Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...
This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...
IPC-4105 is a new document that covers the requirements for metal-base materials that are referred to as metal-based laminate listed in the specification sheets that are contained in the last of the main body. These are to be used primarily for rigid and multilayer printed boards for electronic interconnections.
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.
This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B. When there are changes to a...
IPC/WHMA-A-620E ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620E beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.
IPC/WHMA-A-620E est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620E décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...
El IPC/WHMA-A-620E es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620E describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...
IPC/WHMA-A-620D er den eneste industriudviklede standard for ” Godkendelseskrav for kabler og for produkter med wire harness”. IPC/WHMA-A-620D beskriver materialer, metoder, test og godkendelseskriterier for fremstilling af crimpede samlinger, mekanisk sikrede og loddede forbindelser samt de tilhørende monteringsprocesser som er forbundet med kabel og harness produkter. IPC/WHMA-A-620D blev...
IPC/WHMA-A-620Eは、ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準に関する、唯一の業界合意文書(規格書)である。IPC/WHMA-A-620Eでは、ケーブルおよびハーネス組立品に関係する配線の圧着、機械的固定、またははんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明している。 IPC/WHMA-A-620Eは、IPCおよびThe Wire Harness Manufacturers Association (WHMA) (IPCの関連団体)により作成されたものである。
IPC/WHMA-A-620D jest jedynym standardem branżowym dotyczącym Wymagań i Akceptacji dla Montażu Kabli i Wiązek Przewodów. IPC/WHMA-A-620D opisuje materiały, metody, testy i kryteria akceptacji dla tworzenia zagniatanych, mechanicznie zabezpieczonych i lutowanych połączeń oraz powiązanych czynności montażowych związanych z zespołami kabli i wiązek przewodów. IPC/WHMA-A-620D został opracowany przez...
Der Leitfaden IPC-7711/21 enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen, einschließlich Werkzeugen und Materialien, häufig angewendete Verfahren, Entfernung der Beschichtung und Grafiken zur Unterstützung des Benutzers.
這份指南提供了對使用者有説明的印製板元件的返工，維修和修改程式，包含工具和材料，通用程式，塗敷的清除和圖形
このガイドは、プリント基板組立品のリワーク、リペアおよび改造の手順について紹介するものである。工具や材料、一般的な手順、コーティングの除去方法、およびユーザーの助けとなるようなグラフィック等が掲載されている
这份指南提供了对使用者有帮助的印制板组件的返工，维修和修改程序，包含工具和材料，通用程序，涂敷的清除和图形
IPC/WHMA-A-620E 是線纜及線束元件的要求與驗收的唯一行業共識標準。本標準描述了用於壓接、機械緊固或焊接互連的材料、方法、測試和可接受性標準以及其他線纜線束元件組裝活動的相關標準。 IPC/WHMA-A-620E由IPC和線束製造商協會（WHMA）（隸屬於IPC）共同開發
IPC/WHMA-A-620E là tiêu chuẩn duy nhất trong ngành được đồng thuận về Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây Điện và Cáp Điện. IPC/WHMA-A-620E mô tả các nguyên vật liệu, phương pháp, cách kiểm tra và tiêu chuẩn chấp nhận để sản xuất các liên kết bấm, cố định cơ học, hoặc hàn, cũng như các hoạt động lắp ráp có liên quan liên quan đến các bộ dây điện và cáp điện. IPC/WHMA-A-620E được phát...
คู่มือนี้ให้ขั้นตอนการทำซ้ำ ซ่อมแซม และดัดแปลงชุดประกอบแผงวงจรพิมพ์ รวมถึงเครื่องมือ วัสดุ ขั้นตอนทั่วไป การกำจัดสารเคลือบผิว และกราฟิกเพื่อช่วยเหลือผู้ใช้
IPC/WHMA-A-620E เป็นมาตรฐานที่มีความเห็นร่วมกันในอุตสาหกรรมเพียงมาตรฐานเดียวสำหรับข้อกำหนดและการยอมรับของการประกอบชุดสายไฟและสายเคเบิล IPC/WHMA-A-620E อธิบายเกี่ยวกับวัสดุ วิธีการ การทดสอบ และเกณฑ์การยอมรับสำหรับการผลิตการเชื่อมต่อแบบคริม (crimped), การรักษาเชิงกล (mechanically secured) และการเชื่อมบัดกรี (soldered) รวมถึงกิจกรรมการประกอบที่เกี่ยวข้องกับการประกอบสายไฟและสายเคเบิล IPC/WHMA-A-620E...
Hướng dẫn này cung cấp các quy trình liên quan đến công tác làm lại, sửa chữa và sửa đổi các bảng mạch lắp ráp, bao gồm các dụng cụ và vật liệu, các quy trình chung, công tác loại bỏ lớp phủ và hình ảnh để hỗ trợ người dùng.
IPC/WHMA-A-620E 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC/WHMA-A-620E由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。
IPC/WHMA-A-620D là bộ tiêu chuẩn duy nhất được chấp thuận rộng rãi trong ngành công nhiệp cho Các Yêu Cầu và Tiêu Chuẩn Chấp Nhận của Các Bộ Dây Điện Cáp Điện. IPC/WHMA-A-620D mô tả các vật liệu, phương pháp, kiểm tra và các tiêu chuẩn chấp nhận để thực hiện các mối liên kết bằng phương pháp bấm, gia cố cơ học và hàn và các hoạt động lắp ráp liên quan đến cáp điện và bộ dây điện. IPC/WHMA-A-620D...
IPC/WHMA-A-620Dは、「ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準」に関する、業界合意による唯一の規格である。IPC/WHMA-A-620Dでは、ケーブルおよびハーネス組立品と関係する配線の圧着、機械的固定、およびはんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明する。 IPC/WHMA-A-620Dは、IPCおよびWire Harness Manufacturers Association (WHMA) (IPCの関連組織)によって開発された。 目次を見る。pdfファイル。
El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...
IPC/WHMA-A-620D est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620D décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...
IPC/WHMA-A-620D는 케이블 및 와이어 하네스 어셈블리의 요건과 및 허용 가능성에 대해 업계에서 유일하게 합의된 표준입니다. IPC/WHMA-A-620D는 크림핑된 기계적으로 고정되고 솔더링된 상호연결의 생산을 위한 물질, 방법, 테스트 및 허용 기준과 케이블 및 하네스 어셈블리와 관련된 조립 활동을 설명한다. IPC/WHMA-A-620D는 IPC와 WHMA(Wire Hanage Manufacturers Association)에 의해 개발되었다.
IPC/WHMA-A-620D 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC / WHMA-A-620D由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。 全文共420页。2020年1月开发。2020年5月翻译。
IPC/WHMA-A-620D ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620D beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
IPC/WHMA-A-620D is de enige consensusstandaard in de branche voor eisen en acceptatie van kabel- en kabelboomassemblages. IPC/WHMA-A-620D beschrijft materialen, methoden, tests en acceptatiecriteria voor het produceren van krimp-, mechanisch beveiligde en gesoldeerde verbindingen en de bijbehorende assemblageactiviteiten in verband met kabels en kabelbomen. IPC/WHMA-A-620D is ontwikkeld door IPC...
简要介绍 （英文） 建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻
Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A.
IPC-CC-830B prescribes qualification and performance requirements of conformal coatings. Amendment 1 provides updated requirements for moisture and insulation resistance and temperature and humidity aging and additional information on coating classifications.
材料の適合性を検証するにあたり、業界では種々のテストビークルが存在し活用されている。IPC-B-52試験基板は実生産で用いられる材料と工程を具体的に表現したものであり、イオンクロマトグラフと表面絶縁抵抗(SIR)の両試験のニーズを満たすテストビークルである。IPC-9203Aに示す規格はIPC-B-52テストビークルに対応し、製造工程の評価や、選択した製造材料セットと工程が清浄度の観点から適合しているという客観的証拠を提供する場合に利用できる。またIPC-9203Aに示すユーザーガイドラインはIPC-9202の手引き文書として作成されており、製造者が材料と工程の適合性を実証する場合の規定「～することが望ましい」と「～すること(する必要がある)」という点について明確に提示している。
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
概説 本書、IPC-9202A「材料・工程の特性評価/認定試験の方法」は、プリント回路組立品(PCA)の代表的なサンプル上の表面絶縁抵抗(SIR)の変化を記録するものである。この試験は、はんだ付後に外層に残るはんだ由来のフラックスまたはその他の工程残さが原因で不要な電気化学的反応を引き起こし、信頼性に重大な影響を及ぼす可能性について定量化するものである。 この試験では、実際の生産工程において電子回路の代表的なものとなるような基板をテストビークルとして使用する。これは、定量的かつ定性的なデータの両方を得ることができる試験である。 IPC-9202Aに紹介する試験は、提案された製造工程や工程変更を用いた場合に、生産するハードウェア(製品)の最終的な性能が電気化学的リスクに対し許容可能であるということを示すための「工程認定」用として使用することができる。工程変更には組立工程の手順...
本标准的目的是提供和定义用于采购印刷电子基材（基板）的关键特性和测试方法。 包括6份材料规格单。
本書は、実装からはんだ付工程までにおける部品固定用として、また、プリント配線板の一部として長期的に適用される誘電体接着剤に関し、その要求事項と試験方法を提供するものである。9ページ。2014年12月発行。翻訳年 <2022年7月> 目次を見る
本标准建立了应用于印刷电子的功能导电材料的分类体系，以及鉴定和质量符合性要求。本标准的目的是为印刷电子产品的从业人员提供必要的技术架构，以便设计和制造符合行业既定标准的产品。
本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。
規格「IPC-CC-830C」は、電気絶縁化合物 (コンフォーマルコーティング) の認定および適合要件について確立するものである。これは、最小限の冗長テストで材料の最大の信頼性を得ることを目的として、設計および構築されてきたものである。規格「IPC-CC-830C」は次の項目を対象とする： フォーマルコーティング剤の認定および認定の維持 (表3-1、コラムAおよびB)。 コンフォーマルコーティング剤の特性に関する品質適合性 (表3-1、コラムC)。 本規格においてコンフォーマルコーティングという用語は、プリント配線板組立に使用される保護コーティングのタイプを指す場合に用いられる。コンフォーマルコーティングは単に機械的な支持をもたらすものではなく、湿気および汚染から基板を保護し、電気絶縁を付与することを目的としている。
이 가이드는 인쇄 보드 어셈블리들의 리웤, 수리 및 변경을 위한 절차들을 제공한다. 이 개정에 포함된 것은 통합된 예열기가 있는 초점이 맞는 IR 리플로우 시스템들 및 모든 다른 절차들에 대한 일반적인 최신으로 갱신된 사항들을 사용하는 BGAs에 대한 변경 사항 페이지들, 최신으로 갱신된 일반적인 정보 및 공통적인 절차들 섹션, 새로운 절차들로서 이전에 공개된 절차들이다. 색깔이 있는 삽화들이 많은 절차들에 포함된다. 300개 이상의 페이지들. 2017.01에 발간됨. 번역되었다
涵盖了从贴装到焊接制程用于固定元器件的绝缘粘合剂的要求和测试方法并作为印制板的一部分的长期性能。共9页。2014年12月发布。2015年6月翻译。
IPC/WHMA-A-620B on ainus juhtme- ja kaablikoostude vastavusnõudeid sisaldav tööstuse konsensuslik standard ning see on väljatöötatud IPC ja Wire Harness Manufacturers Association (WHMA). UUS! Standard sisaldab laialdasi nõudeid survevalule, vormivalule, juhtmete jätkamisele, ilma isolatsiooni toeta juhtme pressimisele, isolatsiooni eemalduseta ühendustele, pistikutele, monoliitsetele ja tinatatud...
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
Revizyon B, Kablo ve Kablo Takımlarının Kabul Gereklilikleri için endüstrinin ortak dökümanı olmayı sürdürmektedir. IPC ile Kablo Takımları Üreticileri Birliği (WHMA), bu önemli güncellemeyi geliştirmek için beraber çalışmışlardır. YENİ! Dolgu, kalıplı dolgu, ekleme, yalıtkan desteği olmayan krimp kontakları, sıralı yalıtkan yer değiştirme konnektörleri, konnektör bağlantısı, sert ve uyumlu kablo...
תאור זוהי המהדורה העדכנית ביותר של תקן מוסכם לתעשייה ודרישות קבלה של הרכבות כבלים ורתמות חוטים. תקן זה כולל סעיפים חדשים לאבטחת חיווט, אבטחת בידודים ומידע מעודכן ברבים מהסעיפים, יחד עם למעלה מ- 700 תמונות ואיורים. תקן זה מפרט חומרים שיטות בדיקות וקריטריוני קבלה לייצור בלחיצה, אבטחה מכאנית וחיבורים מולחמים להרכבות ופעולות הקשורות להרכבת כבלים וחיווט. IPC/WHMA-A-620C תוכנן על ידי IPC והאיגוד לייצור...
Az egyetlen ipari konszenzuson alapuló huzal és vezeték szerelvényekkel kapcsolatos követelményeket és elfogadási kritériumokat tartalmazó szabvány legújabb verziója. Új alfejezetekkel egészültek ki a biztosítóhuzallal, biztosítósodronnyal, tömítőgyűrűkkel és kábelcsatornákkal kapcsolatos részek és a szabvány számos fejezete frissítésre került. Több mint 700 fotóval és illusztrációval ez a...
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上
本文件对印制板（PWB）制造过程中印制板组件的应变测试制定了详细的指南，这些制造过程包括组装、测试、系统集成及印制板的周转/运输。 本文件建议的程序使印制板组装厂能够独立进行所要求的应变测试，并为印制板翘曲测量和风险等级评估提供了量化的方法。
Описание английско Стандарт IPC-7711/21B «Восстановление, модификация и ремонт электронных сборок» был полностью обновлен по каждой процедуре, чтобы обеспечить возможность их применения как для бессвинцовых, так и для традиционных оловянно-свинцовых электронных сборок. Это однотомное издание содержит все ранее опубликованные изменения и несколько новых процедур для компонентов BGA (включая...
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards