Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-9203 - Standard Only

Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle

Document #:
IPC-9203
Revision
Original Version
Product Type
Standard Only
Released:  04/27/2012
Language
English
While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...

IPC-7526 - Standard Only

Stencil and Misprinted Board Cleaning Handbook

Document #:
IPC-7526
Revision
Original Version
Product Type
Standard Only
Released:  02/13/2007
Language
English
Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...

IPC-2292 - Standard Only

Design Standard for Printed Electronics on Flexible Substrates

Document #:
IPC-2292
Revision
Original Version
Product Type
Standard Only
Released:  03/01/2018
Language
English
IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...
no-image-available

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

航天及军事应用电子部件补充标准

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  01/27/2025
Language
Chinese
Current Revision
IPC/WHMA-A-620ES航天和军事应用电子部件补充标准为IPC/WHMA-A-620E标准提供了额外要求，以确保线缆及线束组件的可靠性，必须能够耐受在军事或太空环境中运行或遇到的振动与超温。IPC/WHMA-A-620ES不能作为一个独立的文件使用。它必须与母标准IPC/WHMA-A-620E搭配使用。IPC/WHMA-A-620ES-CN于2025年2月发布。
no-image-available

IPC/WHMA-A-620 - Revision C - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Redline Standard
Released:  03/31/2017
Language
English
This is a redline document showing the changes from IPC/WHMA-A-620B to IPC/WHMA-A-620C. This document provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows the deleted/changed text in the IPC/WHMA-A-620B pages and the new/revised text in purple highlights in the IPC/WHMA-A-620C pages. Yellow pop-up boxes are also present in the IPC/WHMA-A...
no-image-available

IPC-7711/21 - Revision C - Redline Standard

Rework, Modification and Repair of Electronic Assemblies - Redline

Document #:
IPC-7711/21
Revision
C
Product Type
Redline Standard
Released:  05/30/2017
Language
English
This is a redline document showing the changes from IPC-7711/21B to IPC-7711/21C. This 790+ page document provides a side-by-side comparison of the two documents and includes the figures. The document shows the deleted/changed text in the IPC-7711/21B pages and the new/revised text in purple highlights in the IPC-7711/21C pages. Yellow pop-up boxes are also present in the IPC-7711/21C pages to...
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

线缆及线束组件的要求与验收轨道交通补充标准Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  06/22/2022
Language
Chinese
Current Revision
IPC/WHMA-A-620C-R 轨道交通补充标准提供了对 IPC/WHMA-A-620C 标准的补充要求，描述了用于轨道交通行业的线缆、线束及其组件的相关要求，如生产压接、机械固定和焊接互连的材料、方法、测试和验收标准等，以保证其在高速铁路环境下电缆线束及其组件的高度可靠性和环境适应性。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC/WHMA-A-620 - Standard Only

IPC/WHMA-A-620 Test Data Tables

Document #:
IPC/WHMA-A-620
Revision
Original Version
Product Type
Test Data Tables
Released:  01/01/2012
Language
English
Current Revision
These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.
no-image-available

IPC/WHMA-A-620 - Revision D - Standard Only

線纜及線束組件的要求與驗收

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  03/12/2021
Language
Chinese (Zhōngwén)
IPC/WHMA-A-620D 是線纜及線束元件的要求與驗收的唯一行業共識標準。本標準描述了用於壓接、機械緊固或焊接互連的材料、方法、測試和可接受性標準以及其他線纜線束元件組裝活動的相關標準。 IPC / WHMA-A-620D由IPC和線束製造商協會（WHMA）（隸屬於IPC）共同開發。
no-image-available

IPC-9708 - Standard Only

鉴定印制板组件焊盘坑裂的测试方法

Document #:
IPC-9708
Revision
Original Version
Product Type
Standard Only
Released:  07/24/2013
Language
Chinese
Current Revision
简要介绍 （英文） 对SMT组件定期进行机械弯曲和冲击测试，以确保它们能够承受预期的生产、搬运和最终使用条件。在弯曲和冲击测试过程中，加载于SMT组件的应变和应变率在焊点附近会导致各种失效模式。本文件提供了测试方法去评估印制板组装（PBA）材料的敏感性和关于表面贴装技术（SMT）的连接焊盘下方绝缘材料接合失效的设计。这些测试方法，包括引脚拉拔、焊球拉拔、焊球剪切测试，可以对不同的印制板的材料和设计参数进行排序和比较。全文共17页。2010年12月发布。2013年5月翻译。
no-image-available

IPC-9703 - Standard Only

焊点可靠性的机械冲击测试指南

Document #:
IPC-9703
Revision
Original Version
Product Type
Standard Only
Released:  09/19/2019
Language
Chinese
Current Revision
本标准建立了机械跌落和冲击测试指南，用于评估印刷电路板组件从系统到组件级别的焊点可靠性。 本文件介绍了定义机械冲击使用条件的方法，定义系统级别的方法；系统级印刷电路板以及与此类使用条件相关的元器件测试板级别的测试，以及使用实验测量机械冲击测试的指导。 正文42页。 2009年3月英文版发布。2019年3月翻译。

IPC-9702 - Standard Only

板极互连的单向弯曲特性描述

Document #:
IPC-9702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2004
Language
Chinese
Current Revision
本文件旨在描述元器件板级互连的断裂强度特性，它详细说明了确定板级器件互连对非周期板组装和测试操作过程中可能发生的弯曲载荷的抗断裂力的常用方法。本文件适用于采用常规再流焊接技术连接到印制板上的表面贴装元器件，并补充了有关运输、装卸或现场操作过程中的机械冲击或撞击的现有标准。全文共14页，2004年6月正式发布英文版，2011年6月发布中文版 预览本标准
no-image-available

IPC-7711/21 - Revision B - Standard Only

Procedures are additions to the IPC-7711B/7721B

Document #:
IPC-7711/21
Revision
B
Product Type
Update
Released:  02/01/2013
Language
English
These procedures are additions to the IPC-7711B/7721B. Section 2: 3.11.1; 5.7.6; 5.8.1.1; 5.8.1.2; 5.8.1.3; Section 3: 4.7.4; 4.7.5; all released November 2011. Section 2: 5.5.7 released February 2013. The pages herein are authorized for download, reproduction, and printing for insertion into the IPC- 7711B/7721B. These procedures are not intended for previous versions of IPC-7711/7721
no-image-available

IPC-7711/21 - Revision C - Standard Only

Reparación, Modificación y Reparación de Ensambles Electrónicos

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  01/08/2018
Language
Spanish
Esta guía proporciona procedimientos de retrabajo, reparación y modificación de ensambles de tablero impreso. Incluídos en esta revisión son los procedimientos previamente lanzados como páginas con cambios, una información general actualizada y sección de procedimientos comunes, nuevos procedimientos de BGAs utilizando sistemas enfocados de reflujo de infrarrojos con precalentadores y...
no-image-available

IPC-7711/21 - Revision C - Standard Only

Nacharbeit, Änderung und Reparatur von elektronischen Baugruppen

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  11/28/2017
Language
German
Dieser Leitfaden enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen. In diese Ausgabe wurden die Verfahren integriert, die in die vorherige Ausgabe als Änderungsseiten aufgenommen wurden. Der Abschnitt Allgemeine Angaben und häufig angewendete Verfahren wurde aktualisiert. Neue Verfahren für BGAs wurden aufgenommen, die fokussierte IR-Reflow-Systeme mit...
no-image-available

IPC-7711/21 - Revision C - Standard Only

電子組件的返工、修改和維修

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  05/29/2020
Language
Chinese (Zhōngwén)
本指南提供了印刷電路板組件的返工，維修和修改程序。 本次修訂包括以前作為修訂本發布的程序，基本信息和通用程序部分的更新，使用具有預熱功能的聚焦紅外返工系統的BGA新程序，和所有其他程序的一般更新。許多規程包含彩色插圖。全文超過300頁。於2017年1月正式發布。2017年5月翻譯。
no-image-available

IPC-7711/21 - Revision C - Standard Only

Reprise, Modification et Réparation des Assemblages Électroniques

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  11/16/2018
Language
French
Ce guide fournit des procédures de reprise, réparation et modification d’assemblages de circuits imprimés. Cette révision inclut les changements de pages des procédures publiées précédemment, une mise à jour de la section information générale et procédures communes, de nouvelles procédures pour les BGAs utilisant des Systèmes de Refusion par IR focalisés avec préchauffe intégrale et des mises à...
no-image-available

IPC-A-620 - Revision B - Standard Only

Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây và Bộ Cáp Dẫn Điện

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  06/10/2015
Language
Vietnamese
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC/WHMA-A-620 - Revision C - Standard Only

Exigences et Critères d’Acceptabilité pour l’Interconnexion des Faisceaux de Fils et de Câbles

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/28/2017
Language
French
Ceci est la révision la plus récente de l’unique norme de consensus industriel sur les Exigences et Critères d’Acceptation pour l’Interconnexion des Faisceaux de Fils et de Câbles, et elle inclut de nouveaux chapitres sur le câblage de sécurité, les câbles de sécurité, les passe câbles et les chemins de câbles ainsi que des informations mises à jour dans de nombreux chapitres. Avec plus de 700...

IPC/WHMA-A-620 - Revision C - Standard Only

Requisitos y Aceptabilidad de Cables y Mazos de Cables

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  10/17/2017
Language
Spanish
Esta es la revisión más reciente del único estándar de consenso de la industria sobre los requisitos y la aceptabilidad de ensambles de cables y mazos de cables e incluye nuevas secciones sobre alambres de seguridad, cables de seguridad, pasamuros y bandejas junto a mucha más información actualizada en muchas secciones del libro. Con más de 700 fotos e ilustraciones, este estándar describe los...
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

線纜及線束組件的要求與驗收

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  06/24/2019
Language
Chinese (Zhōngwén)
本文件是唯一的，行業一致認可的線纜和線束組件的要求和驗收標準的最新版本，增加了鎖線，保險索，索環和線槽的新章節，並更新了許多章節的信息。該標準包含了700多張照片和插圖，描述了壓接，機械固定和焊接互連所用的材料，方法，測試和驗收標準以及與電纜和線束組件相關組裝活動。 IPC / WHMA-A-620C由IPC和線束製造商協會（WHMA）開發.2017年5月翻譯。

IPC-CC-830 - Revision B - Standard with Amendment 1

Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies

Document #:
IPC-CC-830
Revision
B
Product Type
Standard with amendment(s)
Released:  11/06/2008
Language
Chinese
This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

IPC/WHMA-A-620 - Revision C - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  02/18/2019
Language
Polish
Jest to najnowsza rewizja standardu branżowego dotyczącego wymagań i akceptacji dla montażu kabli i wiązek przewodów oraz zawiera nowe rozdziały dotyczące drutowania zabezpieczającego, linek zabezpieczających, przepustów kablowych, kanałów kablowych wraz z zaktualizowanymi informacjami w wielu pozostałych rozdziałach. Dzięki ponad 700 zdjęciom i ilustracjom standard ten opisuje materiały, metody...
126-150 of 187

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards