Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...
IPC-9797A Cover Image

IPC-9797 - Revision A - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  05/18/2023
Language
English
Current Revision
IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

IPC-D-356 - Revision B - Standard Only

Bare Substrate Electrical Test Data Format

Document #:
IPC-D-356
Revision
B
Product Type
Standard Only
Released:  10/01/2002
Language
English
Current Revision
UPDATED! This standard describes a data format for transmitting bare board electrical test information in digital form, including data suitable for computer-aided repair. When used as a netlist input to test data processing, the receiver of IPC-D-356B data will determine test point assignments and positioning. Enhancements to the B Revision include updates to the concept of testable areas to...
no-image-available

IPC-1752 - Revision B - Standard Only

Materials Declaration Management Standard

Document #:
IPC-1752
Revision
B
Product Type
Standard Only
Released:  07/01/2020
Language
English
Current Revision
The IPC-1752B standard establishes the requirements for exhanging material and substance data between suppliers and their customers for electrical and electronics products and other produicts. IPC-1752B includes data fields to help supply chain members transfer materials data required for submission into the ECHA SCIP database.
no-image-available

IPC-1751 - Revision A - Standard Only

Generic Requirements for Declaration Process Management

Document #:
IPC-1751
Revision
A
Product Type
Standard Only
Released:  03/16/2010
Language
English
Current Revision
Amendment 1 to IPC-1751A standard provides the principles and details for declarations necessary between members of a supply chain relationship. This standard is the first in a series of standards that permits segmentation of declaration details based on the subject and scope of the declaration as well as the manufacturing domain. This standard contains general information and is supplemented by...
no-image-available

IPC-J-STD-048 - Revision A - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
A
Product Type
Standard Only
Released:  01/22/2026
Language
English
Current Revision
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

IPC-2581 - Revision C - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
C
Product Type
Standard Only
Released:  11/20/2020
Language
English
Current Revision
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

IPC-1755 - Revision A - Standard Only

Responsible Sourcing of Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
A
Product Type
Standard Only
Released:  04/14/2020
Language
English
Current Revision
The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers in regard to the responsible resourcing of minerals. The IPC-1755As standard originally addressed conflict minerals within the scope of the Dodd-Frank Act in the US. IPC-1755A expands the scope of this document to address global responsible minerals sourcing.
IPC-1755A Am1 Cover Image

IPC-1755 - Revision A - Amendment 1

Responsible Sourcing of Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
A
Product Type
Amendment
Released:  10/27/2021
Language
English
Current Revision
IPC-1755A-Am1 cannot be used without a copy of IPC-1755A the base standard. You can purchase IPC-1755A-Am1 and IPC-1755A in the IPC.org online store. The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers regarding the responsible resourcing of minerals. The IPC-1755 standard originally addressed conflict minerals within the scope of the Dodd...
IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-2614 - Standard Only

Sectional Requirements for Board Fabrication Documentation

Document #:
IPC-2614
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for the documentation of printed circuit board fabrication, and identifies the physical attributes and performance requirements of the unpopulated product. The descriptions apply to rigid, flexible, inorganic substrates or any combination thereof. The construction may be single, double, multilayered, or HDI technology and may include embedded (integrated)...
no-image-available

IPC-HERMES-9852 - Version 1.6 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.6
Product Type
Standard Only
Released:  08/28/2024
Language
English
Current Revision
The IPC-Hermes-9852 standard provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Used with IPC-2591, Connected Factory Exchange, IPC-HERMES-9852 can assist any electronics manufacturer, large or small, to align their companies with smart manufacturing and Industry 4.0. Version 1.6 includes updates to SendBoardInfo and capabilities...
no-image-available

IPC-2591 - Version 2.0 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
2.0
Product Type
Standard Only
Released:  03/10/2025
Language
English
Current Revision
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...
no-image-available

IPC-9271 - Standard Only

Guidelines for In System Programming

Document #:
IPC-9271
Revision
Original Version
Product Type
Standard Only
Released:  09/30/2025
Language
English
Current Revision
The IPC-9271 standard provides guidelines for device-level In-System Programming (ISP) as part of electronics assembly process. The standard addresses PCB design for ISP, fundamental characteristics when selecting an ISP programmer and the integration of the programmer in the production environment, including: fixtures, software, mechanical and process integration methodologies to increase...
no-image-available

IPC-2591 - Version 1.7 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.7
Product Type
Standard Only
Released:  08/24/2023
Language
English
Current Revision
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...

IPC-1753 - Standard Only

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard Only
Released:  01/31/2014
Language
English
Current Revision
IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

IPC-NC-349 - Standard Only

Computer Numerical Control Formatting for Drillers and Routers

Document #:
IPC-NC-349
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Defines a machine readable input format for Computer Numerical Control (CNC) drilling and routing machine tools used by the printed wiring board industry. The format may be used to transfer drilling and routing information between printed board designers, manufacturers and users or as the output CNC standard from converters that expand higher level design input such as IPC-D-350 data. Provides a...

IPC-2612 - Standard Only

Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)

Document #:
IPC-2612
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...
no-image-available

IPC-2612-01 - Standard Only

Sectional Requirements for Electronic Diagramming Symbol Generation Methodology

Document #:
IPC-2612-1
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
Current Revision
This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

IPC-1758 - Standard Only

Declaration Requirements for Shipping, Pack and Packing Materials

Document #:
IPC-1758
Revision
Original Version
Product Type
Standard Only
Released:  05/22/2012
Language
English
Current Revision
This standard addresses the industry need for exchange of information regarding the materials used to protect products during shipment between supply chain partners. This standard is one of several in the 175x series of standards that permits segmentation of declaration details based on the subject and scope of the declaration. This standard describes essential information exchange content with...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...

IPC-1753 - Standard with Amendment 1

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  05/03/2018
Language
English
Current Revision
IPC 1753 WAM1 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...
no-image-available

IPC-2501 - Standard Only

Definition for Web-Based Exchange of XML Data

Document #:
IPC-2501
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
no-image-available

IPC-1752 - Revision A - Standard with Amendments 1 , 2 & 3

Materials Declaration Management Standard

Document #:
IPC-1752
Revision
A
Product Type
Standard with amendment(s)
Released:  04/09/2018
Language
English
IPC 1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported by a PDF form. In the A revision, the data exchange format is specified as Extensible Markup Language (XML) and IPC-1752A relies on third party...
no-image-available

IPC-T-50- Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-1782 - Revision A - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
A
Product Type
Standard Only
Released:  01/13/2021
Language
English
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.

IPC-9850 - Revision A - Standard Only

Surface Mount Placement Equipment Characterization

Document #:
IPC-9850
Revision
A
Product Type
Standard Only
Released:  12/21/2011
Language
English
This standard establishes the parameters, procedures and methodologies used to measure and report pick and place machine accuracy as a relationship to placement speed for a range of SMT component sizes and configurations. Purchase of this standard includes support documentation, report forms and the test material drawings in DWG format.

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-2581 - Revision B - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
B
Product Type
Standard Only
Released:  09/01/2013
Language
English
This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...

IPC-1752 - Revision A - Standard with Amendments 1 & 2

Materials Declaration Management

Document #:
IPC-1752
Revision
A
Product Type
Standard with amendment(s)
Released:  03/14/2014
Language
English
IPC-1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported directly by a PDF form. Third party software developers are invited to supply the implementation tool, and one organization has already made a...
no-image-available

IPC-1754 - Amendment 2

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Amendment
Released:  06/23/2020
Language
English
Current Revision
IPC-1754-Am2, establishes the requirements for the exchanging material and substance data for Products between suppliers and their customers and has been developed through the participation of aerospace, defense, automotive, electronics and solution provider representatives.
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC-9797 - Revision A - Standard Only

符合汽车应用要求及其他高可靠性应用要求的压接标准

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  09/10/2025
Language
Chinese
Current Revision
IPC-9797A 是针对压接技术的要求及验收达成共识的唯一行业标准。IPC-9797A 规定了无焊压接针连接的材料、方法、测试和验收准则。IPC-9797A 得到了 IPC-HDBK-9798 “汽车应用及其他高可靠性应用要求的压接标准使用手册”的支持，供希望了解压接技术更多信息和解释的人员使用
no-image-available

IPC-9797 - Revision A - Standard Only

車載要件およびその他高信頼性用途のプレスフィット規格

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  04/29/2025
Language
Japanese
Current Revision
IPC-9797Aはプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。 プレスフィット技術に関する詳細な情報と説明については、IPC-HDBK-9798 “車載要求事項およびその他高信頼性用途のプレスフィット規格のためのハンドブック”にて補足しているので、そちらを参照のこと。
no-image-available

IPC-1754 - Standard with Amendment 1

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  04/26/2019
Language
English
IPC-1754 WAM 1 Materials and Substances Declaration for Aerospace and Defense and Other Industries establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
IPC-2591_1-5 Cover Image

IPC-2591 - Version 1.5 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.5
Product Type
Standard Only
Released:  08/04/2022
Language
English
IPC-2591, CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical...

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
no-image-available

IPC-2591 - Version 1.6 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.6
Product Type
Standard Only
Released:  03/20/2023
Language
English
IPC-2591, Version 1.6 establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, Version 1.6 applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly...
IPC-HERMES-9852 V. 1.5 Cover Image

IPC-HERMES-9852 - Version 1.5 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.5
Product Type
Standard Only
Released:  01/13/2023
Language
English
The IPC-HERMES-9852 is an open industry standard, developed by the Hermes Standard Initiative and approved by IPC. The IPC-HERMES-9852 provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Specifically, IPC-HERMES-9852, version 1.5 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
IPC-Hermes-9852 V 1.4 Cover Image

IPC-HERMES-9852 - Version 1.4 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.4
Product Type
Standard Only
Released:  04/13/2022
Language
English
The IPC-Hermes-9552 v. 1.4 is an open industry standard, developed by The Hermes Initiative and approved by IPC. The IPC-Hermes-9542 provide a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology (SMT). Specifically, IPC-HERMES-9852, version 1.4 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
IPC/DAC-2552 Cover Image

IPC-DAC-2552 - Standard Only

General Electronic Components Model Based Definition (MBD) Standard

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  08/02/2022
Language
English
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...
no-image-available

IPC-HDBK-9798 - Handbook

Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-HDBK-9798
Revision
Original Version
Product Type
Handbook
Released:  06/21/2022
Language
English
Current Revision
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.
IPC-2591 Version 1.4 Cover Image

IPC-2591 - Version 1.4 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.4
Product Type
Standard Only
Released:  01/10/2022
Language
English
IPC-2591 CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi automated and manual, and is applicable to related mechanical...
no-image-available

IPC-2591 - Version 1.3 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.3
Product Type
Standard Only
Released:  03/08/2021
Language
English
The IPC-2591v1.3 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...

IPC-2591 - Version 1.2 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.2
Product Type
Standard Only
Released:  10/08/2020
Language
English
IPC-2591 version 1.2 (CFX) standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 version 1.2 (CFX) standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable...

IPC-9797 - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2020
Language
English
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...
no-image-available

IPC-2611 - Standard Only

Generic Requirements for Electronic Product Documentation

Document #:
IPC-2611
Revision
Original Version
Product Type
Standard Only
Released:  04/30/2010
Language
English
This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...

IPC-HERMES-9852 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2019
Language
English
IPC-HERMES-9852 an open industry standard, developed by The Hermes Standard Initiative and approved by IPC, provides a state-of-the-art communication protocol for machine-to-machine communication between equipment units in electronics assembly lines for surface-mount technology (SMT). Thus IPC-HERMES-9852 represents a next generation standard to the technology documented in IPC-SMEMA-9851...

IPC-2591 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
Original Version
Product Type
Standard Only
Released:  04/11/2019
Language
English
IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. The IPC-2591 standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...

IPC-2591 - Version 1.1 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.1
Product Type
Standard Only
Released:  01/20/2020
Language
English
IPC-2591 version 1.1 provides updates to several CFX messages since the original IPC-2591 version release. IPC-2591 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 standard applies to communication between all executable processes in the manufacture of printed...

IPC-1072 - Standard Only

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Standard Only
Released:  02/10/2016
Language
English
The purpose of this standard is to provide requirements and best practices for EMS companies to ensure protection of intellectual property for their customers. By using this standard, EMS companies can provide their customers assurance that the intellectual property built into their circuit boards is protected. The document is also a companion to IPC-1071 for printed circuit board manufacturers...

IPC-1791 - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
English
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

IPC-1754 - Standard Only

Material Declaration Standard for Aerospace and Defense

Document #:
IPC-1754
Revision
Original Version
Product Type
Standard Only
Released:  05/03/2018
Language
English
IPC 1754 Materials Declaration Standard for Aerospace and Défense is a brand new standard that establishes the requirements for exchanging material and substance data for products between suppliers and their customers for Aerospace and Defense, Heavy Equipment and other industries. This standard covers the process for exchanging data on chemical substances (“Substances”) that may be present in...
no-image-available

IPC-1755 - Standard with Amendment 1

Conflict Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  04/14/2015
Language
English
Amendment 1 to IPC-1755 Conflict Minerals Data Exchange establishes a standard reporting format for exchange of information between supply chain participants about conflict minerals contained in suppliers' products. IPC-1755 supports reporting at the company and product level, as mutually agreed upon between partners. 30 pages. Released April 2015. Please "Add to Cart" to download this item. You...

IPC-1755 - Standard with Amendment 1 & 2

Conflict Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  05/04/2017
Language
English
This document establishes a standard reporting format for exchange of information between supply chain participants about conflict minerals contained in suppliers' products and supports reporting at the company and product level, as mutually agreed upon between partners.

IPC-1782 - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  11/01/2016
Language
English
The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...

IPC-T-50M-French

IPC-T-50M-FR: Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

IPC-T-50 - Revision M - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  09/19/2016
Language
Chinese
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。

IPC-T-50 - Revision H - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
H
Product Type
Standard Only
Released:  09/17/2009
Language
Chinese
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
no-image-available

IPC-9716 - Standard Only

自動光学検査(AOI)を用いたプリント基板の工程管理に関する要求事項

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  06/27/2025
Language
Japanese
Current Revision
本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。
no-image-available

IPC-HERMES-9852 - Version 1.6 - Standard Only

表面贴装技术组装中机器对机器通信的全球标准

Document #:
IPC/HERMES-9852
Revision
1.6
Product Type
Standard Only
Released:  01/29/2026
Language
Chinese
Current Revision
IPC-Hermes-9852 标准为表面贴装技术提供了一种先进的机器对机器通信协议。与 IPC-2591（互联工厂数据交换协议）配合使用，可以帮助任何规模的电子产品制造商实现智能制造和工业 4.0 转型。1.6 版本更新了 SendBoardInfo，并增加了对支持 HERMES 的设备进行 HERMES 功能查询的功能。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC-2591 - Version 2.0 - Standard Only

互联工厂数据交换(CFX)

Document #:
IPC-2591
Revision
2.0
Product Type
Standard Only
Released:  10/14/2025
Language
Chinese
Current Revision
本标准规定了电子装配制造领域中制造过程与相关主机系统之间进行全向数据交换的要求。 本标准适用于印制板组件制造中所有可执行流程（包括自动化、半自动化以及手动流程）之间的通信，同时也适用于相关的机械装配与其他事务处理流程
1-75 of 87

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards