This is a three-page list of common terms and definitions use when discussing solder reflow processes and equipment.
Products
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
IPC J-STD-001JA/IPC-A-610JAは、J-STD-001JおよびIPC-A-610Jの車載用途向け追加規格である。本書は、自動化された大量生産という条件を考慮しながら、過酷な環境下にある車載用電気・電子組立品について、そのはんだ付け信頼性を保証するための基準を提供するものである。 IPC J-STD-001JA/IPC-A-610JA(Addendum：追加規格)は独立した文書として使用するのではなく、J-STD-001JおよびIPC-A-610Jと併用する必要がある。
IPC J-STD-001JS 航太和軍事補充標準補充或取代了 IPC J-STD-001J 中針對焊接電氣和電子元件的特定要求，這些元件必須能在航太和軍事應用振動與熱迴圈環境下運行。
IPC-2591, CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical...
This is a seven-page list of electronics cleaning terms and definitions as they relate to printed circuit assembly cleaning.
This is a four-page list of common terms and definitions use when discussing screen printing processes and equipment.
This SMEMA standard is for fiducial marks. It was developed to facilitate the accurate placement of components on printed circuit boards.
001H-DE und IPC-A-610H-DE enthält Kriterien zur Sicherstellung der Zuverlässigkeit gelöteter elektrischer und elektronischer Automotive-Baugruppen im Feld unter rauen Umgebungsbedingungen und berücksichtigt die Bedingungen einer automatisierten Großserienproduktion. Die Ergänzung IPC J-STD-001HA-DE/IPC-A-610HA-DE ist kein eigenständiges Dokument. Diese Ergänzung fordert, dass sie in Verbindung mit...
IPC-2591, Version 1.6 establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591, Version 1.6 applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly...
The IPC-HERMES-9852 is an open industry standard, developed by the Hermes Standard Initiative and approved by IPC. The IPC-HERMES-9852 provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Specifically, IPC-HERMES-9852, version 1.5 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
The IPC-Hermes-9552 v. 1.4 is an open industry standard, developed by The Hermes Initiative and approved by IPC. The IPC-Hermes-9542 provide a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology (SMT). Specifically, IPC-HERMES-9852, version 1.4 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
Le présent Addendum IPC-J-STD-001HS relatif aux applications spatiales et militaires présente des exigences qui complètent ou remplacent des exigences spécifiques de la norme J-STD-001H, pour les assemblages électriques et électroniques brasés qui doivent résister aux vibrations et aux importantes variations thermiques subies dans des applications spatiales et militaires.
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...
IPC J-STD-001HS 航天和军用附录，补充或替代 IPC J-STD-001H 对焊接电气和电子组件的具体要求，这些组件必须能够承受进入航天和军事应用并在其中运行的振动和热循环环境。
IPC-2591 CFX standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 CFX standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi automated and manual, and is applicable to related mechanical...
The IPC-2591v1.3 standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable to related mechanical assembly...
IPC-2591 version 1.2 (CFX) standard establishes the requirements for the omni-directional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. IPC-2591 version 1.2 (CFX) standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated and manual, and is applicable...
This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...
During mass soldering, it is important that all solder joints reach the minimum soldering (reflow) temperature to assure metallurgical bonding of the solder alloy and the base metals to be soldered. Metallurgical bonding requires that both surfaces to be soldered, as well as the solder, reach this minimum soldering temperature for a sufficient time to allow the wetting of the solder surfaces. This...
Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...
Guidelines for accelerated reliability testing of surface mount solder attachments when evaluating and extrapolating the results of these tests towards actual use environments of electronic assemblies. 50 pages. Released November 1992. Included in the IPC-C-103 and the IPC-C-1000 Collections
The IPC-A-640, Acceptance Requirements for Optical Fiber, Optical Cable and Hybrid Wiring Harness Assemblies standard provides acceptance requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640 standard includes full-color illustrations and an Excel spreadsheet Verification and Compliance...
This full-color document provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. This standard also includes an Excel spreadsheet Verification and Compliance checklist.
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards