Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...
IPC-9797A Cover Image

IPC-9797 - Revision A - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  05/18/2023
Language
English
Current Revision
IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

IPC-2581 - Revision C - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
C
Product Type
Standard Only
Released:  11/20/2020
Language
English
Current Revision
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-8911 - Standard Only

Requirements for Conductive Yarns for E-Textiles Applications

Document #:
IPC-8911
Revision
Original Version
Product Type
Standard Only
Released:  05/27/2025
Language
English
Current Revision
This standard identifies categories and establishes a designation system and qualification/quality conformance requirements and test methods for conductive yarns used in e-textiles. The standard enables suppliers of conductive yarns to demonstrate their products’ performance against real-world processing and end-use environments, leveraging eight IPC Test Methods developed specifically for...
no-image-available

IPC-8981 - Standard Only

Quality and Reliability of E-Textile Wearables

Document #:
IPC-8981
Revision
Original Version
Product Type
Standard Only
Released:  04/10/2025
Language
English
Current Revision
This standard defines classification levels and testing thresholds to assess the reliability of e-textile wearables in their intended end-use environments. It establishes baseline criteria for evaluating durability under mechanical stressors—such as abrasion, flexing, and UV exposure—and environmental conditions including perspiration, washing, water/saltwater, alkalis, and acids. Supported by 14...
no-image-available

IPC-9716 - Standard Only

Requirements for Automated Optical Inspection (AOI) Process Control for Printed Board Assemblies

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  01/10/2025
Language
English
Current Revision
IPC-9716 provides requirements for automated optical inspection (AOI) systems to define, set up, establish, and apply process control for manufacturing printed board assemblies, including general and specific process and AOI system conditions. Requirements include inspection parameters, lighting conditions, calibration, detectability, resolution, threshold limits, program setups, measurement...

IPC-8921 - Standard Only

Requirements for Woven and Knitted Electronic Textiles (E-Textiles) Integrated with Conductive Fibers, Conductive Yarns and/or Wires

Document #:
IPC-8921
Revision
Original Version
Product Type
Standard Only
Released:  12/05/2019
Language
English
Current Revision
The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classifications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and definitions for...

IPC-1782 - Revision A - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
A
Product Type
Standard Only
Released:  01/13/2021
Language
English
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.
no-image-available

IPC-2581 - Revision B - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
B
Product Type
Standard Only
Released:  09/01/2013
Language
English
This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-9797 - Revision A - Standard Only

符合汽车应用要求及其他高可靠性应用要求的压接标准

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  09/10/2025
Language
Chinese
Current Revision
IPC-9797A 是针对压接技术的要求及验收达成共识的唯一行业标准。IPC-9797A 规定了无焊压接针连接的材料、方法、测试和验收准则。IPC-9797A 得到了 IPC-HDBK-9798 “汽车应用及其他高可靠性应用要求的压接标准使用手册”的支持，供希望了解压接技术更多信息和解释的人员使用
no-image-available

IPC-9797 - Revision A - Standard Only

車載要件およびその他高信頼性用途のプレスフィット規格

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  04/29/2025
Language
Japanese
Current Revision
IPC-9797Aはプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。 プレスフィット技術に関する詳細な情報と説明については、IPC-HDBK-9798 “車載要求事項およびその他高信頼性用途のプレスフィット規格のためのハンドブック”にて補足しているので、そちらを参照のこと。

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
IPC/DAC-2552 Cover Image

IPC-DAC-2552 - Standard Only

General Electronic Components Model Based Definition (MBD) Standard

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  08/02/2022
Language
English
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...
no-image-available

IPC-HDBK-9798 - Handbook

Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-HDBK-9798
Revision
Original Version
Product Type
Handbook
Released:  06/21/2022
Language
English
Current Revision
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.

IPC-9797 - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2020
Language
English
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...

IPC-1791 - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
English
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...

IPC-1782 - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
Original Version
Product Type
Standard Only
Released:  11/01/2016
Language
English
The lack of a uniform component traceability standard has caused an unnecessary consumption of resources (e.g., time, people, money, etc.) to track events or parts to their sources and to remedy any quality, reliability, etc., issues. Lack of a standard has also made it difficult to uniformly create and appropriately enforce the necessary contracts. This standard establishes minimum requirements...
no-image-available

IPC-9716 - Standard Only

自動光学検査(AOI)を用いたプリント基板の工程管理に関する要求事項

Document #:
IPC-9716
Revision
Original Version
Product Type
Standard Only
Released:  06/27/2025
Language
Japanese
Current Revision
本規格は、自動光学検査(AOI)システムを用いてプリント基板組立品を製造する際の工程管理を定義、設定、確立、適用するための要求事項を規定するものである。ここでは一般工程、特殊工程およびAOIシステムの条件等を範囲としている。 要求事項には、検査パラメータ、照明条件、校正、検出可能性、分解能、閾値の限度、プログラムセットアップ、測定システム解析(MSA)、保守、検証プロトコルが含まれる。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC/DAC-2552 -Standard Only

通用电子元器件基于模型的定义

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  10/25/2024
Language
Chinese
Current Revision
本标准是由IPC与广东省数字化学会（DAC）联合开发和发布的国际标准，目的旨在解决业内各厂家提供的电子元器件几何模型及语义信息参差不齐，导致使用方需要重复建模处理且无法复用等问题。 定义如何将电子元器件的设计、仿真、制造等领域的属性关联到电子元器件的三维模型及对应的子部件上的数字化建模，通过规范各供应商按模型交付，工具间（CAD/CAE等）数据集成打通的方式，可实现高效
IPC-9797 JP Cover

IPC-9797 - Standard Only

車載要求事項およびその他高信頼性用途のプレスフィット規格

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  07/28/2021
Language
Japanese
Current Revision
IPC-9797はプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。
no-image-available

IPC-8921 - Standard Only

集成导电纤维、导电纱和/或导电线的机织型和针织型电子织物(E-Textiles) 的要求

Document #:
IPC-8921
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2021
Language
Chinese
Current Revision
IPC-8921标准提供并定义了工业测试方法和指南，以提供与导电纤维、导电纱和/或导线相结合的机织和针织型电子织物的关键特性和耐久性的性能数据。 IPC-8921标准还提供了机织和针织电子纺织品、纤维、纱线和电线的经典说明，并包括20个新的电子纺织品术语和定义。
1-25 of 27

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards