Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-9797A Cover Image

IPC-9797 - Revision A - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  05/18/2023
Language
English
Current Revision
IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-9797 - Revision A - Standard Only

符合汽车应用要求及其他高可靠性应用要求的压接标准

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  09/10/2025
Language
Chinese
Current Revision
IPC-9797A 是针对压接技术的要求及验收达成共识的唯一行业标准。IPC-9797A 规定了无焊压接针连接的材料、方法、测试和验收准则。IPC-9797A 得到了 IPC-HDBK-9798 “汽车应用及其他高可靠性应用要求的压接标准使用手册”的支持，供希望了解压接技术更多信息和解释的人员使用
no-image-available

IPC-9797 - Revision A - Standard Only

車載要件およびその他高信頼性用途のプレスフィット規格

Document #:
IPC-9797
Revision
A
Product Type
Standard Only
Released:  04/29/2025
Language
Japanese
Current Revision
IPC-9797Aはプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。 プレスフィット技術に関する詳細な情報と説明については、IPC-HDBK-9798 “車載要求事項およびその他高信頼性用途のプレスフィット規格のためのハンドブック”にて補足しているので、そちらを参照のこと。

IPC-9707 - Standard Only

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Standard Only
Released:  09/13/2011
Language
English
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
no-image-available

IPC-HDBK-9798 - Handbook

Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-HDBK-9798
Revision
Original Version
Product Type
Handbook
Released:  06/21/2022
Language
English
Current Revision
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.

IPC-9797 - Standard Only

Press-fit Standard for Automotive Requirements and other High-Reliability Applications

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2020
Language
English
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...

IPC-1791 - Standard Only

Trusted Electronic Designer, Fabricator and Assembler Requirements

Document #:
IPC-1791
Revision
Original Version
Product Type
Standard Only
Released:  09/05/2018
Language
English
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
IPC-9797 JP Cover

IPC-9797 - Standard Only

車載要求事項およびその他高信頼性用途のプレスフィット規格

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  07/28/2021
Language
Japanese
Current Revision
IPC-9797はプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。
no-image-available

IPC-9797 - Standard Only

符合汽车应用要求及其他高可靠性应用要求的压接标准

Document #:
IPC-9797
Revision
Original Version
Product Type
Standard Only
Released:  10/13/2020
Language
Chinese
IPC-9797是符合汽车应用要求及其他高可靠性应用要求的压接标准。IPC-9797规定了印刷电路板的符合压接技术的特性、鉴定和验收要求，涵盖了用于苛刻环境(如汽车和航空航天)的高可靠性应用的制造性和可靠性需求。
1-13 of 13

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards