描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
Products
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上
本文件对印制板（PWB）制造过程中印制板组件的应变测试制定了详细的指南，这些制造过程包括组装、测试、系统集成及印制板的周转/运输。 本文件建议的程序使印制板组装厂能够独立进行所要求的应变测试，并为印制板翘曲测量和风险等级评估提供了量化的方法。
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
IPC-6903A标准提供了62个印刷电子行业设计和制造相关的术语及定义。IPC-6903A标准为全球印刷电子行业提供一个共同的语言和知识
This guideline provides an overview of the design process flow for printed electronics based devices, modules and units, and final products.The intent of IPC/JPCA-2291 is to establish a design process flow that will facilitate and improve the practice of printed electronics design. IPC/JPCA-2291 identifies documents such as standards that can be used to assist during the design process flow. 24...
This standard on spherical transient bend testing is intended to characterize the maximum allowable strain that a surface mount component's board level interconnects can withstand in flexural loading. Whereas four-point monotonic bend test methods only address simple planar bending, spherical bend tests establish strain limits of board level interconnects under worst-case flexure conditions that...
The IPC-4592 standard establishes the classification system, the qualification and quality conformance requirements for functional dielectric materials used in printed electronics applications. The intended applications include but are not limited to dielectric materials as protective dielectric or insulator/insulation layer(s), capacitive layer(s), crossovers and encapsulant(s) for devices in...
This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible and rigid base dielectric materials for manufacture of printed electronics. It includes base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most current classification system...
This document provides comprehensive data to help users more easily determine material performance, capabilities, and compatibility of functional conductive materials for the manufacture of printed electronics. It includes: classification schemes based on composition, conductor type, and post-processing structure; functional conductive material specification sheets to present properties for the...
IPC-HDBK-9798 provides guidelines and supporting information for manufacturing electronic assemblies using compliant press-fit technology. The intent is to explain the ‘‘how-to’’ and ‘‘why’’ information, and fundamentals for these processes. This handbook is supporting the IPC-9797 standard.
IPC-9797 is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 prescribes practices for the characterization, qualification and acceptance requirements of compliant press-fit technology for printed boards that cover the manufacturability and reliability needs for high reliability applications intended for use in harsh environments such as automotive...
Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...
This document provides tests that record changes in surface insulation resistance (SIR) on a representative sample of a printed circuit assembly. It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electrochemical reactions that grossly affect reliability. It uses test vehicles that...
Surface mount pad cratering typically initiates prior to detection by existing electrical monitoring test methods. There are limited instrumentation techniques that are currently available that can identify non-electrical damage and its location to a high degree of accuracy. This guideline document establishes an acoustic emission (AE) method to evaluate the performance and reliability of surface...
While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...
Cleaning of stencils and misprinted PCBs has taken an increasingly important role in surface mount technology. Fine and ultra-fine pitch lands, together with other advanced packages, place new demands on stencil cleaning. Paste volume is a critical issue for fine, ultra-fine, chip-scale, BGA and flip-chip components. Insufficient solder due to clogging of stencil apertures is a primary cause of...
IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...
IPC-1791 provides minimum requirements, policies and procedures for printed board design, fabricating and assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. Demonstration of the ability to meet and maintain the requirements of IPC-1791 as trusted design, fabricator or assembly organization...
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
IPC-9797はプレスフィットピンの要求事項および許容基準に関する、業界合意による唯一の規格である。IPC-9797は、無はんだによるプレスフィットピン接続の材料、工法、試験、許容基準について記述するものである。
简要介绍 （英文） 对SMT组件定期进行机械弯曲和冲击测试，以确保它们能够承受预期的生产、搬运和最终使用条件。在弯曲和冲击测试过程中，加载于SMT组件的应变和应变率在焊点附近会导致各种失效模式。本文件提供了测试方法去评估印制板组装（PBA）材料的敏感性和关于表面贴装技术（SMT）的连接焊盘下方绝缘材料接合失效的设计。这些测试方法，包括引脚拉拔、焊球拉拔、焊球剪切测试，可以对不同的印制板的材料和设计参数进行排序和比较。全文共17页。2010年12月发布。2013年5月翻译。
本标准建立了机械跌落和冲击测试指南，用于评估印刷电路板组件从系统到组件级别的焊点可靠性。 本文件介绍了定义机械冲击使用条件的方法，定义系统级别的方法；系统级印刷电路板以及与此类使用条件相关的元器件测试板级别的测试，以及使用实验测量机械冲击测试的指导。 正文42页。 2009年3月英文版发布。2019年3月翻译。
Coming Soon
IPC-9242: Guidelines for Microsection Evaluation
IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures
IPC-7527A: Requirements for Solder Paste Application
IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards
IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards
IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard
IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797
IPC-WP-011: Guidance for Strain Gage Limits for Assemblies
J-STD-048A: Notification Standard for Product Discontinuance
IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits
IPC-1401B: Corporate Social Responsibility Management System Standard
IPC -1751B: Generic Requirements for Declaration Process Management
IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards
IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards