Menu
Close
Contact Us

Standards

Your results

Document #

Language

Products

IPC-A-610H Korean Cover Image

IPC-A-610 - Revision H - Standard Only

전자 어셈블리의 허용 가능성

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  01/10/2022
Language
Korean
Current Revision
IPC-A-610H는 전자 산업에서 가장 널리 사용되는 전자 어셈블리 허용 표준이다. IPC-A-610H 표준은 문서에 대한 일반 업데이트를 포함하며, 몇 가지 새로운 표면 실장 소자 유형을 도입하고 대상 조건을 제거한다. 29개국에서 온 참가자들은 이 문서를 전자 산업에 가져오기 위해 그들의 조언과 전문지식을 제공했다. 이는 전자 어셈블리의 허용 기준에 관심이 있는 검사자, 작업자 및 기타 사용자에게 반드시 필요한 사항이다. IPC-A-610은 J-STD-001 및 IPC/WHMA-A-620과 함께 개발되었다.
IPC-A-610H Hungarian cover image

IPC-A-610 - Revision H - Standard Only

Elektronikai szerelvények elfogadhatósága

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Hungarian
Current Revision
Az IPC-A-610 a világon legszélesebb körben használt elektronikai szerelvényekkel foglalkozó szabvány. Az IPC-A-610H szabvány jó néhány dokumentum általános frissítését tartalmazza, számos új felületszerelt alkatrésztípus követelményeivel kiegészült és megszüntetésre került a cél állapot kritérium. A szabvány 29 országból beérkező újabb észrevételek, szakvélemények alapján biztosítja az...
no-image-available

IPC-J-STD-001 - Revision H - Standard Only

焊接的电气和电子组件要求

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/12/2021
Language
Chinese
Current Revision
IPC-J-STD-001H是全球公认的焊接工艺和材料标准。 此次更新由27个国家/地区参与者参与编制，这些参与者在本文件更新期间投入了大量的精力并贡献了宝贵的专业知识。IPC-J-STD-001H标准是业内最新标准，包含了有关使用X射线方法检查其他方法难以检测的通孔焊料状况的指导信息。 IPC-J-STD-001H是关注电子行业电气和电子组件工艺和验收标准的人员必须掌握的技术标准。 J-STD-001是与IPC-A-610一起制定的标准，由IPC-HDBK-001提供支持，其中包含了一些额外信息和要求释义。如果您已购买了IPC-J-STD-001H，您还需要购买并使用IPC-A-610H，二种标准需要配合使用。
no-image-available

IPC-A-600 - Revision H - Standard Only

Acceptanskrav för mönsterkort

Document #:
IPC-A-600
Revision
H
Product Type
Standard Only
Released:  10/13/2010
Language
Swedish
Current Revision
NOUVEAU! Cette version prend en compte les exigences et les critères d’acceptabilité liés à l’utilisation d’alliages sans plomb. La révision A du standard industriel consensuel dénomé Critères d’Acceptation pour l’Assemblage de Câbles et de Faisceaux de câbles est désormais disponible. IPC et l’association Wire Harness Manufacturers Association (WHMA), ont collaboré pour développer de manière...
no-image-available

IPC-A-610 - Revision H - Standard Only

Tiêu Chuẩn Chấp Nhận Các Sản Phẩm Lắp Ráp Điện Tử

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  09/16/2021
Language
Vietnamese
Current Revision
IPC-A-610 là tiêu chuẩn chấp nhận sản phẩm lắp ráp điện tử được sử dụng rộng rãi nhất trong ngành công nghiệp điện tử. Tiêu chuẩn IPC-A-610H bao gồm một cập nhận tổng quát, giới thiệu một số loại linh kiện SMT mới và loại bổ tình trạng mục tiêu. Những người tham gia từ 29 quốc gia cung cấp đầu vào và ý kiến chuyên môn để mang đến tài liệu này cho ngành công nghiệp điện tử. Đây là bộ tiêu chuẩn...
IPC-A-610H RO Cover Image

IPC-A-610 - Revision H - Standard Only

Acceptabilitatea Ansamblurilor Electronice

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  04/12/2022
Language
Romanian
Current Revision
IPC-A-610H este cel mai folosit standard de acceptabilitate pentru asamblare electronice din industria electronică. Standardul IPC-A-610H include o actualizare generală a documentului, introduce mai multe tipuri noi de componente cu montare pe suprafață și elimină condițiile Obiectiv. Participanții din 29 de țări și-au adus contribuția și expertiza lor pentru a da acest document industriei...

IPC-A-600 - Revision J - Standard Only

プリント板の受け入れ

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  06/28/2017
Language
Japanese
Current Revision
本書は、プリント板の、外部または内部で観察可能な、目標、許容可能、または不適合条件について記載している。現在のIPC規格で求められている要求事項を、目に見える形で示しており、プリント板がこれら文書の規定に従わない場合には、製品の受け入れ基準は発注・受入当事者の合意のよるものとする。120の写真とイラストを追加/更新して、リビジョンEから改版が行われました。 本書は、明確な図解入りでプリント板の受け入れ基準を記述している。この4色のドキュメントは、部品実装前のプリント板 (ベアボード) の外観または内部的に観察可能な、許容可能な条件と不適合な条件を写真と説明図で記載している。業務に携わる作業者、検査員、技術者は、業界が合意した最新情報を把握していることを確認すべきである。改訂J版は、120以上の新規または改善した写真と説明図を使用して、マイクロビアと接合の大きさ (寸法)、銅めっき...
IPC-A-610H Thai Cover Image

IPC-A-610 - Standard Only

การยอมรับได้ของงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-A-610H เป็นมาตรฐานการยอมรับการประกอบอุปกรณ์อิเล็กทรอนิกส์ที่ใช้กันอย่างแพร่หลายมากที่สุดในอุตสาหกรรมอิเล็กทรอนิกส์ มาตรฐาน IPC-A-610H มีการอัพเดตทั่วไปในเอกสาร, แนะนำตัวอุปกรณ์ที่ติดตั้งบนพื้นผิวประเภทใหม่ๆ หลายประเภท และลบสภาวะเป้าหมายออกไป ผู้เข้าร่วมจาก 29 ประเทศได้ให้ข้อมูลและความเชี่ยวชาญเพื่อนำเอกสารนี้ไปสู่อุตสาหกรรมอิเล็กทรอนิกส์ นี่เป็นสิ่งที่ต้องมีสำหรับผู้ตรวจสอบ ผู้ปฏิบัติงาน...
J-STD-001H-TH Cover Images

IPC-J-STD-001 - Standard Only

ข้อกำหนดสำหรับงานบัดกรีทางไฟฟ้าและงานประกอบอิเล็กทรอนิกส์

Document #:
IPC-J-STD-001
Revision
H
Product Type
Standard Only
Released:  03/01/2022
Language
Thai
Current Revision
IPC-J-STD-001H เป็นที่ยอมรับทั่วโลกในด้านเกณฑ์กระบวนการและวัสดุในการบัดกรี อัปเดตด้วยผู้เข้าร่วมจาก 27 ประเทศที่ให้ข้อมูลและความเชี่ยวชาญ มาตรฐาน IPC-J-STD-001H นำเกณฑ์ล่าสุดมาสู่อุตสาหกรรม รวมถึงคำแนะนำเกี่ยวกับการใช้เอ็กซ์เรย์เพื่อตรวจสอบสภาพการบัดกรีผ่านรูที่มองไม่เห็นโดยวิธีอื่น IPC-J-STD-001H...

IPC-A-600 - Revision J - Standard Only

Baskı Devre Kartlarının Kabul Edilebilirliği

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  01/03/2019
Language
Turkish
Current Revision
Baskı devre kartları kabul edilebilirliği için açıklamalı resimli bir rehber! Bu dört renkli döküman çıplak baskı devre kartlarında iç kısımdan ya da dışarıdan gözlemlenebilen hedef, kabul edilebilir ve uygun olmayan koşullar için fotoğraflar ve şekiller sağlamaktadır. Operatörleriniz, denetleme personeliniz ve mühendislerinizin en son yayınlanmış revizyonu kullanmasını sağlayınız. 120 adet yeni...
no-image-available

IPC-6012 - Revision D - Addendum with Amendment 1 - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum with amendment(s)
Released:  12/01/2018
Language
English
The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...

IPC-J-STD-001 - Revision F - Addendum with Amendment 1 - Space and Military

Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Addendum with amendment(s)
Released:  02/01/2017
Language
English
This addendum supplements J-STD-001F for soldered assemblies that must survive the vibration and thermal cyclic environments associated with space hardware. It is to be used with J-STD-001FS WAM 1.
no-image-available

IPC-J-STD-001 - Revision F - Amendment 1

Requirements for Soldered Electrical and Electronic Assemblies

Document #:
IPC-J-STD-001
Revision
F
Product Type
Amendment
Released:  11/01/2015
Language
English
This is an amendment to IPC J-STD-001F, a recognized industry-consensus standard covering materials and processes. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements and BGA voiding criteria, new graphics for several surface mount component types, revised staking criteria, and recognition of the paragraphs addressed in J-STD-001FS, Space...
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  12/14/2015
Language
English
This amendment cannot be used without a copy of IPC-A-610F. See Related items. This is an amendment to IPC-A-610F, a recognized industry-consensus standard covering acceptability requirements for electronic assemblies. Changes include, but are not limited to, a revision to plated-through hole, PTH, minimum fill requirements, BGA voiding criteria for noncollapsing balls, and staking criteria.

IPC-A-610 - Revision G - Standard Only

Критерии приемки электронных сборок

Document #:
IPC-A-610
Revision
G
Product Type
Standard Only
Released:  04/09/2020
Language
Russian
Current Revision
Описание на русском IPC-A-610 – наиболее широко используемый в мире стандарт по приемке электронных сборок. Этот документ, в усовершенствование которого внесли свой вклад участники из 17 стран, поделившись информацией и своими знаниями и опытом, предоставляет отрасли новейшие критерии наряду со множеством новых и обновленных иллюстраций. Этот документ – то, что обязательно нужно иметь контролерам...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Reprise, Modification et Réparation des Assemblages Electroniques

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  06/27/2025
Language
French
Current Revision
Le guide IPC-7711/21 fournit des procédures de reprise, réparation et modification des assemblages de circuits imprimées, y compris des outils et des matériaux, des procédures courantes, le retrait du revêtement et des graphiques pour aider l'utilisateur.

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo y/o al proceso

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  02/18/2019
Language
Spanish
Current Revision
El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Retrabajo, Modificacion y Reparacion de Ensambles Electronicos

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  01/05/2026
Language
Spanish
Current Revision
La guía IPC-7711/21 proporciona procedimientos para reelaborar, reparar y modificar conjuntos de placas de circuitos impresos, incluidas herramientas y materiales, procedimientos comunes, eliminación de revestimiento y gráficos para ayudar al usuario.

IPC-J-STD-001 - Revision G - Standard Only

Wymagania dla lutowanych zespołów elektrycznych i elektronicznych

Document #:
IPC-J-STD-001
Revision
G
Product Type
Standard Only
Released:  02/18/2019
Language
Polish
Current Revision
J-STD-001 jest uznawany globalnie za swoje kryteria dla procesów lutowania i materiałów lutowniczych. Uaktualniony przez uczestników z 18 krajów, dostarczających danych wejściowych i wiedzy specjalistycznej, niniejszy dokument dostarcza przemysłowi najnowszych kryteriów wraz z nowymi grafikami dla łatwości użycia i zrozumienia. Dokument ten musi mieć każdy w przemyśle elektronicznym, kto jest...

IPC-A-610 - Revision F - Standard Only

Acceptanskrav för kretskort

Document #:
IPC-A-610
Revision
F
Product Type
Standard Only
Released:  11/09/2015
Language
Swedish
Current Revision
IPC-A-610 är den mest använda standarden i världen för elektroniktillverkning och är ett måste för alla kvalitetssäkrings- och produktionsavdelningar. IPC-A-610F illustrerar industrigodkända acceptanskriterier för kretskort genom detaljerad text som beskriver tillstånd för acceptabelt och defekt, med stöd av fyrfärgsbilder och illustrationer. Denna revision inkluderar två nya typer av...
no-image-available

IPC - J-STD-004 - Revision D - Standard Only

はんだ付用フラックスに関する要求事項

Document #:
IPC-J-STD-004
Revision
D
Product Type
Standard Only
Released:  08/21/2025
Language
Japanese
Current Revision
本規格書は、高品質のはんだ相互接続に使用するフラックスの分類および特性評価に関し、一般的な要求事項を規定するものである。本規格書は、品質管理および調達目的のために使用することも可能である。
no-image-available

IPC-7711/21 - Revision D - Standard Only

Nacharbeit, Änderung und Reparatur Elektronischer Baugruppen

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  06/27/2025
Language
German
Current Revision
Der Leitfaden IPC-7711/21 enthält Verfahren für die Nacharbeit, Reparatur und Änderung von Leiterplatten-Baugruppen, einschließlich Werkzeugen und Materialien, häufig angewendete Verfahren, Entfernung der Beschichtung und Grafiken zur Unterstützung des Benutzers.
no-image-available

IPC-7711/21 - Revision D - Standard Only

電子組件的返工、修改和維修

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  10/25/2024
Language
Chinese (Zhōngwén)
Current Revision
這份指南提供了對使用者有説明的印製板元件的返工，維修和修改程式，包含工具和材料，通用程式，塗敷的清除和圖形
no-image-available

IPC-7711/21 - Revision D - Standard Only

電子組立品のリワーク、改造およびリペア

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  09/04/2024
Language
Japanese
Current Revision
このガイドは、プリント基板組立品のリワーク、リペアおよび改造の手順について紹介するものである。工具や材料、一般的な手順、コーティングの除去方法、およびユーザーの助けとなるようなグラフィック等が掲載されている
276-300 of 753

Coming Soon

IPC-9242: Guidelines for Microsection Evaluation

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-A-630A: Acceptability Standard for Manufacture, Inspection, and Testing of Electronic Enclosures

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-7527A: Requirements for Solder Paste Application

IPC-4204C: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards

IPC-J-STD-002F: Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC-4101F: Specifications for Base Materials for Rigid and Multilayer Printed Boards

IPC-1755B: Responsible Sourcing of Minerals Data Exchange Standard

IPC-2223F: Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards

IPC-HDBK-9798A: Handbook and Guide to Supplement IPC-9797

IPC-WP-011: Guidance for Strain Gage Limits for Assemblies

J-STD-046A: Customer Notification Standard for Product/Process Changes by Electronic Product Suppliers

J-STD-048A: Notification Standard for Product Discontinuance

IPC-T-50P: Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC-1401B: Corporate Social Responsibility Management System Standard

IPC -1751B: Generic Requirements for Declaration Process Management

IPC-6013F: Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

IPC-4413 - Am1: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards